CSIS 330 _Final_Exam.pdf test practice materials 2020.pdf



Question 2

1 out of 1 points



Question 1

Which of the following is not an example of an extranet?

1 out of 1 points

Selected Answer:

All of the following are examples of an extranet.

Communication across a network is carried on a(n) . It

provides the channel over which the message travels from source to destination.

Selected Answer:

Medium



Question 3

1 out of 1 points

Using a HomePlug standard Powerline adapter, devices can connect to the LAN

wherever there is an electrical outlet.

Selected Answer:

True



Question 4

1 out of 1 points

According to the textbook, which of the following are at the foundation of all network

architectures?

Selected Answer:

A and B above



Question 5

What is a converged network?

Selected

Answer:

A network where voice, video, and data move over the same

infrastructure



Question 6

Which of the following is false with respect to the Internet?

Selected Answer:

All of the above are true with respect to the Internet.



Question 7

1 out of 1 points

clouds are built to meet the needs of a specific industry and can be

public or private.

Selected Answer:

Custom



Question 8

1 out of 1 points

Because routers are used to interconnect networks, the ports on a router are referred

to as .

Selected Answer:

Network interfaces



Question 9

1 out of 1 points

All devices within a network must have a unique IP address for communication

between devices to function properly.

Selected Answer:

True



Question 10

What command is used to verify the condition of switch interfaces?

Selected Answer:

show ip interface brief



Question 11

What error message is displayed in the IOS if not all the required keywords or

arguments were entered?

Selected Answer:

All of the above



Question 12

1 out of 1 points

0

out of 1 points

1

out of 1 points

What command must be entered to configure an IP address of 192.168.10.3 and

subnet mask of 255.255.255.0 for a switch?

Selected Answer:

ip address 192.168.10.3 255.255.255.0



Question 13

What happens when the exit command is entered in privileged EXEC mode?

Selected Answer:

The console session is ended.



Question 14

1 out of 1 points

0

out of 1 points

The command is used to verify the internal IP configuration on a

local host.

Selected Answer:

ipconfig



Question 15

1

out of 1 points

The address, 127.0.0.1, is defined by the TCP/IP protocol as a

reserved address that routes packets back to the host.

Selected Answer:

Loopback



Question 16

What CLI shortcut is used to abort the current command?

Selected Answer:

Ctrl-C



Question 17

1 out of 1 points

Which protocol enables clients to access email stored on a mail server and maintains

email on the server?

Selected Answer:

IMAP



Question 18

1 out of 1 points

The seven OSI model layers are more often referred to by number rather than by

name. Which layer number is the presentation layer in the OSI model?

Selected Answer:

Six



Question 19

1 out of 1 points

Which standards organization published the OSI reference model to develop a

layered framework for networking protocols?

Selected Answer:

The International Organization for Standardization (ISO)



Question 20

Which standards organization is responsible for developing communication

1 out of 1 points

standards that include radio equipment, cellular towers, VoIP devices, and satellite

communications?

Selected Answer:

TIA



Question 21

1 out of 1 points

Which layer of the TCP/IP model determines the best path through the network?

Selected Answer:

Internet



Question 22

The Internet layer of the TCP/IP model includes functions such as

acknowledgement, error recovery, and sequencing.

Selected Answer:

True



Question 23

What is the decimal equivalent of the binary number 11111111?

Selected Answer:

255



Question 24

What is the decimal equivalent of the binary number 01010101?

Selected Answer:

85



Question 25

What is the binary equivalent of the hexadecimal number EF?

0

out of 1 points

1

out of 1 points

1 out of 1 points

Selected Answer:

11101111



Question 26

What is the binary equivalent of the hexadecimal number FF?

Selected Answer:

11111111



Question 27

What is the decimal equivalent of the hexadecimal number EB?

Selected Answer:

235



Question 28

What is the binary equivalent of the decimal number 255?

Selected Answer:

11111111



Question 29

1 out of 1 points

According to the textbook, fiber is primarily used as backbone cabling for high-traffic,

point-to-point connections between data distribution facilities and for the

interconnection of buildings in multi-building campuses.

Selected Answer:

True



Question 30

1 out of 1 points

offer a switching component with multiple ports,

allowing multiple devices to be connected to the local-area network (LAN) using

cables.

Selected Answer:

Integrated service routers



Question 31

What type of connector is used to terminate UTP cables?

Selected Answer:

RJ-45



Question 32

1 out of 1 points

is a technique in which an analog signal, such as

a voice, is converted into a digital signal by sampling the signal’s amplitude and

expressing the different amplitudes as a binary number.

Selected Answer:

Pulse-coded modulation (PCM)



Question 33

With , the signals are patterns of electrical pulses.

1 out of 1 points

Selected Answer:

Copper cable



Question 34

Which part of a fiber optic cable surrounds the core and acts as a mirror?

Selected Answer:

Cladding



Question 35

1 out of 1 points

0

out of 1 points

is the ability to determine whether a frame contains an

error and the ability to repair the error from the information sent with the frame

communication.

Selected Answer:

None of the above



Question 36

1

out of 1 points

Which part of a fiber optic cable consists of pure glass and is the part of the fiber

where light is carried?

Selected Answer:

Core



Question 37

1 out of 1 points

A broadcast packet contains a destination IP address that has all zeroes (0s) in the

host portion.

Selected Answer:

False



Question 38

Layer 2 switches provide all of the following except:

Selected Answer:

Forwarding of packets to devices in other networks



Question 39

What happens when a data collision occurs on an Ethernet bus?

1 out of 1 points

0

out of 1 points

Selected Answer:

The MAC sublayer prioritizes the frame with the lower MAC address.



Question 40

The ARP table is maintained dynamically.

Selected Answer:

True



Question 41

Which of the following is not one of the primary fields in an Ethernet frame?

Selected Answer:

Source IP Address



Question 42

1

out of 1 points

1 out of 1 points

What type of switch is one that you cannot add features or options to beyond those

that originally came with the switch?

Selected Answer:

Fixed-configuration switch



Question 43

Which IPv6 8-bit field replaces the IPv4 TTL field?

Selected Answer:

Hop limit



Question 44

1 out of 1 points

is a technology commonly implemented within IPv4 networks that

provides a way for multiple devices to share a single public IP address.

Selected Answer:

NAT



Question 45

When configuring a host, the gateway was not configured. How will this affect

communication to and from this device?

Selected Answer:

Communication will be limited to hosts in the local network.



Question 46

Which of the following is not a characteristic of IP?

Selected Answer:

Reliable



Question 47

1 out of 1 points

The Internet is largely based on , which is still the most widely used network

layer protocol.

Selected Answer:

IPv4



Question 48

Which of the following is not a column in an IPv6 Route Table?

Selected Answer:

Netmask



Question 49

What command can be used to display a host’s routing table in Windows?

Selected Answer:

netstat –r



Question 50

Which of the following is not a component of a router?

1 out of 1 points

0

out of 1 points

1

out of 1 points

Selected Answer:

All of the above are components of a router



Question 51

Which of the following port numbers are used by both TCP and UDP?

Selected Answer:

53 and 161



Question 52

1 out of 1 points

The combination of the source and destination IP addresses and the source and

destination port numbers is known as a .

Selected Answer:

Socket



Question 53

1 out of 1 points

When a sender does not receive an acknowledgement from a TCP transmission

within a certain period of time, what happens?

Selected

Answer:

The sending host assumes that the segments were lost and retransmits

only the portion of the message that is lost.



Question 54

1 out of 1 points

Regulating the amount of data a source transmits is a function of .

Selected Answer:

Flow control



Question 55

1 out of 1 points

In the second step of the TCP three-way handshake, which flag(s) is(are) set by the

destination host?

Selected Answer:

Both A and B above



Question 56

Which of the following is not a common transport layer protocol?

Selected Answer:

HTTP



Question 57

TCP breaks up a message into small pieces known as .

Selected Answer:

Segments



Question 58

The UDP PDU s referred to as a .

Selected Answer:

Datagram



Question 59

1 out of 1 points

What utility is used to identify the network path between hosts?

Selected Answer:

Traceroute



Question 60

1 out of 1 points

enables the automatic assignment of addressing information such as IP

address, subnet mask, default gateway, and other configuration information.

Selected Answer:

DHCP



Question 61

Address resolution is used when a device on the LAN knows the IPv6 unicast

1 out of 1 points

address of a destination but does not know its Ethernet MAC address. To determine

the MAC address for the destination, the device will send a(n) message to the

solicited-node address. The device that has the targeted IPv6 address will respond

with a(n) message containing its Ethernet MAC address.

Selected Answer:

NS, NA



Question 62

1 out of 1 points

Which of the following techniques allows IPv4 and IPv6 to coexist on the same

network?

Selected Answer:

Dual stack



Question 63

The address of an IPv4 network address is always an even number.

Selected Answer:

True



Question 64

1 out of 1 points

Which IPv4 block of addresses is reserved for future use and is currently being used

for research and experimentation purposes?

Selected Answer:

240.0.0.0 to 255.255.255.254



Question 65

1 out of 1 points

Which IPv4 block of addresses is reserved for teaching and learning purposes?

Selected Answer:

192.0.2.0 to 192.0.2.255



Question 66

1 out of 1 points

Which type of communication is occurring when a packet is sent from one host to all

hosts in the network?

Selected Answer:

Broadcast



Question 67

1 out of 1 points

According to the textbook, without subnetting an IPv4-based network, performance

will quickly decrease as the number of hosts increases.

Selected Answer:

True



Question 68

How many usable hosts per sub-network will you have using a /17 address?

Selected Answer:

32766



Question 69

1 out of 1 points

When subnetting IPv6 address space, why is it wise to subnet on a nibble boundary?

Selected

Answer:

IPv6 is expressed in hexadecimal, and each nibble is one

hexadecimal character.



Question 70

Using an IPv4 network address of 192.168.2.0/26, what is the last usable host

address in the first subnet (i.e. subnet[0])?

Selected Answer:

192.168.2.62



Question 71

How many subnetworks can you have with a /20 prefix?

Selected Answer:

16



Question 72

A junior network technician is assigning host addresses to devices in the

192.168.1.0/25 subnet. The departmental printer is assigned the address

1 out of 1 points

0 out of 1 points

192.168.1.131/25 with a 192.168.1.1/25 default gateway. No one in the department

is able to print. What is the cause of the problem?

Selected Answer:

The default gateway is not correct for the departmental subnet.



Question 73

What is the primary purpose of subnetting IPv6 address space?

Selected Answer:

Support hierarchical network design



Question 74

1 out of 1 points

You have a network that needs 29 subnets while maximizing the number of host

addresses available on each subnet. How many bits must you borrow from the host

portion of a classful network address to provide the correct subnet mask?

Selected Answer:

5



Question 75

1 out of 1 points

Keeping the functionality of the application layer separate from the functionality of

transporting the data allows the application layer protocols to be changed and new

applications to be developed, without the developer having to worry about the

mechanics of the data across the network.

Selected Answer:

True



Question 76

Which of the following is false with respect to FTP?

Selected Answer:

All of the above are true statements.



Question 77

0 out of 1 points

0

out of 1 points

Which of the following are functions of the Presentation Layer in the OSI model?

Selected Answer:

Coding/conversion/translation of data



Question 78

Which of the following message types is a client request for data?

Selected Answer:

GET



Question 79

Which port(s) is(are) assigned to SMTP?

Selected Answer:

25



Question 80

What is the difference between HTTP and HTTPS?

Selected Answer:

HTTP is not secure; HTTPS is secure



Question 81

1

out of 1 points

1 out of 1 points

What is the IPv6 DHCP message that corresponds to the IPv4 DHCPDISCOVER

message?

Selected Answer:

SOLICIT



Question 82

0 out of 1 points

What is the IPv6 DHCP message that corresponds to the IPv4 DHCPREQUEST

message?

Selected Answer:

None of the above



Question 83

0

out of 1 points

A enables a network professional to quickly compile

statistical information about traffic flows on a network.

Selected Answer:

Traffic analyzer



Question 84

What is the order of steps recommended to mitigate a worm attack?

Selected Answer:

Containment > Inoculation > Quarantine > Treatment



Question 85

1

out of 1 points

1 out of 1 points

helps to eliminate single points of failure in a network.

Selected Answer:

Redundancy



Question 86

Which of the following is not a type of access attack?

Selected Answer:

Dictionary attack



Question 87

0

out of 1 points

1

out of 1 points

Which of the following firewall techniques prevents or allows access by specific

application types based on port numbers?

Selected Answer:

Application filtering



Question 88

1 out of 1 points

Which type of physical threat involves physical damage to servers, routers, switches,

cabling, and workstations?

Selected Answer:

Hardware threats



Question 89

1 out of 1 points

Which type of security threat involves breaking into a computer to destroy or alter

data records?

Selected Answer:

Data loss/manipulation



Question 90

1 out of 1 points

translates an internal IP address or group of IP addresses into an

outside, public IP address that is sent across the network.

Selected Answer:

NAT



Question 91

1 out of 1 points

attacks are the unauthorized manipulation of data, system

access, or user privileges.

Selected Answer:

Access



Question 92

1 out of 1 points

What type of attack is the unauthorized manipulation of data, system access, or user

privileges?

Selected Answer:

Access



Question 93

1 out of 1 points

What type of network vulnerability is involved when JavaScript is turned on in web

browsers?

Selected Answer:

Configuration



Question 94

An attacker runs a ping sweep against a network. What type of attack is this?

Selected Answer:

Reconnaissance



Question 95

With regard to firewall technology, what is stateful packet inspection?

Selected

Answer:

Incoming packets must be legitimate responses from internal

requests.



Question 96

1 out of 1 points

A(n) firewall is a firewall that is built into a dedicated hardware device

known as a security appliance.

Selected Answer:

Appliance-based



Question 97

A(n) firewall consists of a firewall application that runs on a network

operating system such as UNIX or Windows.

Selected Answer:

Server-based



Question 98

1 out of 1 points

In what type of attack are multiple SYN packets sent to a server by an attacker,

thereby tying up resources as the server attempts to complete the TCP three-way

handshake?

Selected Answer:

Denial of service



Question 99

Which of the following protocols support delay-sensitive delivery to support

streaming media?

Selected Answer:

B and C above



Question 100

Which type of traffic should be given the highest priority on a network?

1 out of 1 points

Selected Answer:

Voice

Students also viewed