WEEK 11 FINAL EXAM

Course

Network Arch And Analysis

The disadvantage with distributed monitoring is that

What are the two parts of encryption?

Multicast technologies include the following:

Why is SNMP (Simple Network Management Protocol) so widely used?

What are the three major components that make up network management architecture?

Which of the following describes Random Early Detection (RED)?

With ____________ signaling, bits within the frame header signal to routers how the frame should be handled whereas with ____________ signaling, hosts send additional frames to indicate that a certain QoS service is desired for a particular traffic flow.

What are the two types of intrusion detection systems (IDS) that notify the administrator of detected malicious events?

Regardless of the WAN technology selected, what is the one critical network design step that must be completed?

What should be done after determining the network and device characteristics that will be managed?

Which type of cabling scheme is most appropriate for a larger building?

What can the channel aggregation supported by Multilink PPP (MPPP) be used for?

RMON (Remote Monitoring) conveys information in nine groups of parameters. It provides network managers with

Traffic caused by polling can be significant. Be sure to

Which type of Ethernet is the most appropriate for building and campus-backbone networks?

When selecting a VPN firewall, the firewall should have

A _____________ operates over existing _____________ lines between a telephone switching station and a home or office.

A systems analysis approach to testing

In order to effectively analyze the security of a network and respond to security incidents, what type of accounting data should be collected?

How does LFI (link-layer fragmentation and interleaving) reduce delay on slow WAN links?

It is difficult to anticipate all contingencies and potential problems when writing a script, therefore a _________ should be maintained.

_____________ is a physical and data link layer standard for the transmission of frames on a LAN.

When writing a test script, both _____________ and ______________ should be included.

In a cable modem, upstream bandwidth is allocated using three different time slots,

When should test results from vendors, independent labs or trade journals be used to prove to customers that the selected design will perform as intended?