Master Cam Expert
meshail
509_final_project_presentation.pptx4-Axes Model
Group 1
Altubayyeb Faisal, Mora Micheal F, Hyun Jin Kim, Alharbi Fayez Hamed, Sagun Shrestha, Alamri Atallah
Introduction
Actual Size:
Diameter: 70 inch
Length: 120 inch
Xform – Scale
Use percentage to reduce 90%.
Description (Faisal AlTubayyeb)
Raw Material size:
Diameter: 7 inch
Length: 11.813 inch
Shape Overview:
Cylindrical shape
Contains 26 holes
0.5 inch thickness of a plate
A hole goes through the body
A sloppy surface with 4 pockets
Plate
Holes
Hole goes through the body
Sloppy Surface
Procedure
Reduce total diameter except the plate.
Cut plate with contour.
Create 2 new planes and cut with contour.
Drill and pocket on the planes.
Use 4-axis rotary toolpath on the sloppy surface.
Create 4 new planes for pocketing and drilling.
Drill 6 holes and a pocket on the right plane.
Create a hole going through the whole body.
Work on details.
Struggle & Solution
Struggle & Solution
Mike
Copy toolpath
Tools Used
1 inch flat end-mill
0.5 inch flat end-mill
0.25 Standard drill
0.25 Sphere mill
0.3 inch Standard Drill
0.2 inch Standard Drill
0.6 inch Standard Drill
0.125 flat end-mill
1.432 Standard Drill
Conclusion
