q

Building C - Induction Briefing

05.12.2012

Planning Ground Level Plan

Primary Entry

Secondary Entry

S e rv

ic e A

c c e s s

Storage & Distribution

Service Access

Workshop

Teaching

Staff

Industry Rm

Teaching

Staff

Flexible Learning

Technology Hub

Planning Level 1 Plan

Stair

Stair

The Ideal ESD Extrusion Summer Mode

The Ideal ESD Extrusion Winter Mode

Mechanical Systems

• Roof mounted Chiller plus Air Handling and Fan Coil Units

• Dust Collection System

• Night Sky Cooling

• In-Slab Heating/Cooling System

• Workshop Radiant Gas Tube Heating

• Workshop Air Movement Fans

• Workshop Compressed Air

• Gabion Wall/ Rock store Fresh air Intake

• Solar Hot Water

• Motorised Ventilation Louvres

• BMS

Dust Collection System • Manual On/Off control via wall mounted switches

• Duct mounted air velocity sensors assist in duct air speed control

• Dust Extraction Unit switched off via BMS at 6:00PM (adjustable)

Part Plan of Workshop Area

Night Sky Cooling • Automatic operation by BMS

– Operates from Midnight until 6:00AM when thermal storage water in tanks > 15°C and roof temp < 2°C (adjustable) above thermal storage water.

– Ceases when tank water = 15°C +/- 1°C

• Set points are adjustable via BMS

In-Slab Heating/Cooling System • Automatic operation on BMS from 6:00AM until 6:00PM (adjustable)

• Each screed circuit operates from a Zone Manifold (automatic operation – no need to touch)

– In Winter – at <10°C ambient at night time, system activates heating mode at 4:00AM (adjustable)

– In Summer – at >27°C ambient at night time, system activates heating mode at 4:00AM (adjustable)

Workshop Radiant Gas Tube Heating • Automatic On/Off switching and temperature control (adjustable) via

BMS time clock control with manual over ride.

• Black bulb type heat sensors located in workshop area in 3 localised zones served by the heaters

Gas Tube Heaters

Workshop Ventilation Fans • Automatic On/Off switching via BMS time clock control with manual

over ride. – Fans switch on when ambient outside air temperature >25°C (adjustable)

– Fan speed controlled by variable Speed Drive (VSD)

Compressed Air System • Automatic operation switched On/Off via BMS central time clock

control – There are 2 compressors in workshop area

– Compressors switched off at 6:00PM via BMS (adjustable)

Motorised Ventilation Louvres • Automatic operation at roof level

– Associated with Natural Ventilation, night purge and relief air.

– Time clock controlled and driven open if weather station indicates favourable external conditions

– Driven open via UPS in case of power failure or Fire Alarm

Gabion Rock Store Ventilation Intake • Tempers hot ambient air in Summer and draws fresh air in through 3

underground pipes to fan rooms. – In the event of water ingress to underground pipes ( microbiological risk)

moisture sensors will detect water and divert air intake to an alternate above- ground FA intake.

– Water removed via pump within pipe pit.

Gabion Wall Ventilation Intakes

Electrical Systems Lighting Control Functionalities

• Push button to turn on lights – 20 minutes no movement reduce to 50%. 20 minutes no

further movement – turn lights off automatically

Trade Studios, Admin Office, Technical Hubs, Labs, Flexible Learning

• PIR turns lights ON and OFF – after 15 minutes no movement, lights turn off

Toilets, Tool Store, Collaborative Learning, Group Learning Pods, Print Area

• PIR turns lights ON and OFF – lights stay on if any part of floor is occupied. After hours

lighting to 50% - then if no movement in 15 minutes lights turn off

Gallery, Atrium, Corridors, Flexible Learning

• Push button to turn on lights – PE functionality maintains 320 lux on workstations. If no

movement in 15 minutes lights turn to 50% and then after another 60 minutes, lights turn

off in Business hours or after another 15 minutes, lights turn off in ‘after-hours’ times

Open Plan Office, Layout Area, Practice Firm, Staff Offices

Motion Sensors

Lighting Switch Plates

Lighting Control Panel