Figure
PAT24
setting-home-network.pdf
Setting up a home network Windows 7
In this page
Install the hardware
Set up or verify an Internet connection (optional)
Connect the computers
Run the Set Up a Network wizard
Enable sharing on your network
Test your network
Changing TCP/IP settings
Connecting your laptop from work to your home network
Before you start: To decide what type of network to set up or to find out what hardware and cables you need, see What you need to set up a home network. That topic has
information about the different types of networks (also known as network technologies), as well as hardware requirements for each type. To learn more about the overall
process of setting up a network, see Start here to set up a home network in Windows 7.
Once you know what type of network you want, and you have the necessary hardware, there are four steps you might need to take:
1. Install any necessary hardware.
2. Set up an Internet connection (optional).
3. Connect the computers.
4. Run the Set Up a Network wizard (for wireless networks only).
Each of these steps is described in detail later in this article.
Start by setting up just one computer to make sure the network is working before you try to add additional computers or devices.
Note
The information in this article is written for people who have a broadband connection—usually DSL, cable, or Fiber Optic Service (FiOS)—to the Internet rather than a
dial-up connection. However, you don't need an Internet connection to set up a network.
Install the hardware
Install network adapters in any computers that need them, or connect them to the computers. (Follow the installation instructions in the information that came with each
adapter.)
Top of page
Set up or verify an Internet connection (optional)
You don't need an Internet connection to set up a network, although most people want to use their network to share an Internet connection. To set up an Internet
connection, you need a cable or DSL modem and an account with an Internet service provider (ISP). For more information, see What do I need to connect to the Internet?
If you already have an Internet connection, you just need to verify that the connection is working. To do that, open your web browser and go to a website that you don't
usually visit. (If you go to a website that you visit often, some of its webpages might be stored on your computer and will display correctly even if your connection is faulty.) If
the website opens and you don't get any error messages, your connection is working.
To share an Internet connection
Top of page
Why Windows Apps+games PCs+tablets Downloads How-to carla rasool Sign out
Get started Get help
Setting up a home network - Windows Help
Connect the computers
There are several ways to connect computers—the configuration depends on the type of network adapters, modem, and Internet connection that you have. It also depends
on whether you want to share an Internet connection among all the computers on the network. The following sections briefly describe some connection methods.
Show all
Ethernet networks
Wireless networks
HomePNA networks
Powerline networks
Turn on all computers or devices, such as printers, that you want to be part of your network. If your network is wired (Ethernet, HomePNA, or Powerline), it should be set up
and ready to use. You should test your network (see below) to make sure that all computers and devices are connected correctly.
Top of page
Run the Set Up a Network wizard
If your network is wired, you will be connected immediately when you plug in the Ethernet cables. If your network is wireless, run the Set Up a Network wizard on the
computer attached to the router.
• Open Set Up a Network by clicking the Start button , and then clicking Control Panel. In the search box, type network, click Network and Sharing Center, click Set
up a new connection or network, and then click Set up a new network.
The wizard will walk you through the process of adding other computers and devices to the network. For more information, see Add a device or computer to a network.
Top of page
Enable sharing on your network
If you want to share files and printers on your network, make sure your network location type is set to Home or Work and that network discovery and file sharing are turned
on. For more information, see Choosing a network location and Enable or disable network discovery.
Top of page
Test your network
It's a good idea to test your network to make sure that all of the computers and devices are connected and working properly. To test your network, do the following on each
network computer:
• Click the Start button , click your user name, and then, in the left pane, click Network.
You should be able to see icons for the computer you are on and all of the other computers and shared printers on the network.
Note
If you don't see icons in the Network folder, then network discovery and file sharing might be turned off. For more information, see Enable or disable network
discovery.
It might take several minutes for computers running earlier versions of Windows to appear in the Network folder.
Top of page
Changing TCP/IP settings
If you need to adjust TCP/IP settings for your network, see Change TCP/IP settings.
Top of page
Connecting your laptop from work to your home network
For information about using your work laptop on your home network, see Switching between your home and workplace networks.
Setting up a home network - Windows Help
Top of page
Need more help?
See all support pages for web & networks.
Ask a question in the community forums.
Hello from Seattle. © 2014 MicrosoftDisclaimers Terms of Use Trademarks Privacy & Cookies Site MapUnited States of America
Setting up a home network - Windows Help
