two production and operation questions
scotla
hw2_p_and_o.docxMSD 340 Spring 2014
Homework 2
Note:
• Due date: Feb 25, Tuesday. An electronic copy is due before 9:30 am.
• Please provide detailed steps (intermediate formula and final result) for each answer.
• Late homework will receive NO credits.
• If you have any difficulties, please make an appointment with the instructor.
Chapter 10: Quality Control
Computer upgrades have a nominal time of 80 minutes. Samples of five observations each have been taken, and the results are as listed.
|
|
|
Sample |
|||||
|
Observations |
|
1 |
2 |
3 |
4 |
5 |
6 |
|
|
1 |
81 |
80.5 |
79.6 |
78.9 |
80.5 |
79.7 |
|
|
2 |
78.8 |
78.7 |
79.6 |
79.4 |
79.6 |
80.6 |
|
|
3 |
80 |
81 |
80.4 |
79.7 |
80.4 |
80.5 |
|
|
4 |
78.4 |
80.4 |
80.3 |
79.4 |
80.8 |
80 |
|
|
5 |
79.2 |
80.1 |
80.8 |
80.6 |
78.8 |
81.1 |
Question 1: (0.8 points)
If we know the standard deviation of the process is σ = 2, z-score=3.
1. Using factors from the table above, determine upper and lower control limits for the mean chart, and decide if the process is in control. (0.4 points)
1. Using factors from the table above, determine upper and lower control limits for the range chart, and decide if the process is in control. (0.4 points)
Question 2: (0.8 points)
If we don’t know the standard deviation of the process.
1. Using factors from the table above, determine upper and lower control limits for the mean chart, and decide if the process is in control. (0.4 points)
1. Using factors from the table above, determine upper and lower control limits for the range chart, and decide if the process is in control. (0.4 points)
Question 3: (0.4 points)
If we regard the operating time greater than 80 as a defective (i.e., > 80), calculate the three-sigma control limit of proportion (p) control chart, and decide if the process is in control.
1/2
