NEED A 3D MODEL WITH 360FUSION!!

In Fusion 360, using parametric modeling techniques, create a lampshade to be 3D printed for the Ikea HEMMA lamp cord set. Designs must incorporate 2 or more varying ‘bodies’ (i.e. scale and/or shape) that are combined into a single solid. 

DON’T FORGET TO LEAVE ROOM FOR THE BULB!

I’d suggest about 1/4” (127mm) space all the way around for incase you have to get your grubby hands up in there to change the bulb (approximately 15000 hours from now….but you know…..it may happen-just sayin)

TO PRINT

Be sure your file is of correct scale. Export your design as a .stl for print. Depending on complexity and machine time, we may decide it’s best to outsource some of these. 

Your file(s) are limited by the dimensions achievable by the printers. Therefore, check the materials library of Shapeways or if you’re prepping for the Ultimakers verify the volume is within the dimensions for the Ultimaker2+ printers (see .4mm specs: ). Printability is factored into final grade. 

FINAL DESIGN REQUIREMENTS:

Wall Thickness: between 1.5mm - 4mm

Max Dimensions: 5x6x5” (WxHxD)

Total print time: < 30hours (See cura estimates)

Weight: <250grams (See cura estimates)

Want a color we don’t have? Let me know! We’ll do what we can!

I NEED SOMEONE WHO IS GOOD AT 360FUSION SOFTWARE