PRJ656 Project Management Integration Framework

Johnston-Home Project Basement Finishing - Plans 02-05-2020
GENERAL REQUIREMENT	Qty	Start Date	Finished
Apply for Building Permit	1	02/05/2020	02/07/2020
Measure basement	1192	02/07/2020	02/07/2020
Storage container	1	02/09/2020	02/10/2020
Total
Building Materials	Qty
Drywall Sheets	40	02/12/2020	02/13/2020
2x4 boards	80	02/12/2020	02/13/2020
Drywall screws-Bucket	1	02/12/2020	02/13/2020
Plaster-Bucket	6	02/12/2020	02/13/2020
Fiber glass tape	4	02/12/2020	02/13/2020
Insallation Rolls	15	02/12/2020	02/13/2020
Total
FRAMING LABOR	Qty
Framing materials:
Rough carpentry lumber	4	02/24/2020	02/27/2020
Total
Steps Started to complete Drywall Basement-Priority
Insulation Installed	15	02/28/2020	02/29/2020
Drywall Sheets Installed	40	03/01/2020	03/05/2020
Taped Seam of dry wall		03/06/2020	03/07/2020
Mudded Drywall		03/08/2020	03/09/2020
Textured Walls		03/10/2020	03/11/2020
Completion of Drywalling Basement			03/12/2020

Project Objective statement

1.0 Overview of the Project

1.1 General Project Objective Statement

The Homeowner [Teresa Johnston] is finishing Framing the Basement of the primary residence. The homeowner will be responsible for purchasing the materials, tools and equipment. Owner will also be responsible of labor and all other expenses need to for the completion of the framing of the basement.

1.2 Project Location

Basement Framing Project

555 Main Street

Newton, Utah 85445

2.0 Deliverables

2.1 Owner will supply the deliverables to any outside contractors be electricians, plumbers and Hvac installers.

2.2 Owner will provide the plans to the electrician on where to place the receptacle outlets, light fixtures and switches.

2.3 Owner will be provided where heating registers will be put installed.

2.4 The Deliverables due date will be provided for the date of execution for the electrician and hvac installers.

3.0 Milestones

3.1 Foundation work making sure waterproofing the inside of basement.

3.2 Framing-Installation of wood framing.

3.3 Mechanical-Installation of electrical, heating and plumbing.

Interior work-Finishing of installing insulation, hanging of drywall, taping, mudding, and painting.

3.4 Trim-Finish window, door and baseboard trim

4.0 Technical Requirements

4.1 Find out the Basement requirements are from the City.

4.2 Checklist for obtaining Building Permit and Permit Fees.

4.3 Plans to the contactors that are hired.

5.0 Limits and exclusions

5.1 Standards of the scope of the project so the inspector will not make any recommendations or perform any actions during the inspection.

5.2 County Inspectors will not determine the following

· Cost of materials

· The effectiveness, and efficiency of heating and its components.

· Warranty and Guarantees of the contractors.

6.0 Review

6.1 Will be done by the owner where to purchase all materials need to complete the framing of the basement.

several Deliverables, several Milestones, several Technical Requirements and any limits or exclusions you feel necessary. In addition, identify the customer reviewer.