Create Construction company

Part 1

· The base of a column which is supported by a concrete footing must have a bearing plate large enough to distribute the load over an area sufficient to preclude excessive bearing stresses

· While base plate design is relatively open as far as size, shape, and aesthetics, there are manufacturing issues that come into play.

· Some base plate designs are difficult to fabricate or call for materials that are expensive or rare. Others may not be available in the size requested. All these issues can raise the price of the base plate.

Figure 1: Metal base plate count condition for plan number 2

Therefore, considering these factors following metal base plate has been selected from RS means online with its quantities and cost estimation:

Table 1: Summary of calculation of total quantities and cost estimation for metal base plate

Description	Total QTY (SF)	Material total	Labor cost	Total cost
Metal Column base plate, light, 100-ton project, up to 150 pounds each, A992 steel, shop fabricated, incl shop primer	58.80	$ 65.27	$ 20.16	$ 85.43

Part 2

Figure 2: Electrical outlets count condition for plan number 8

Assumptions

1. Standard 15-amp receptacles are suitable for typical household appliances, lamps, and other accessories. Therefore, 15-amp receptacles are chosen for both Duplex data receptacle and Duplex Receptacle outlet in this study.

2. The same cost estimates are considered for both duplex receptacles outlet and duplex receptacle outlet (mounted).

Table 2: Summary of calculation of total quantities and cost estimation for outlets

Description	Total QTY (sf)	Material total	Labor cost	Total cost
Duplex data receptacle, EMT & wire 20', 15 amp, incl box and cover plate	1	$ 62.23	$ 59.27	$ 121.50
Duplex telephone receptacle outlet	84.00	$ 11,433.24	$ 4,804.00	$ 16,237.24
Duplex Receptacle outlet, EMT & wire 20', 15 amp, incl box and cover plate	239	$ 7,960.05	$ 13,513.56	$ 16,237.24
Total		$ 19,455.52	$ 18,376.83	$ 37,832.35