My home work

MIS607 – Cybersecurity

Assessmet Title: Threat Model Report

Student Name:

Student Number:

Lecturer:

Trimester 3 (2020)

Academic Integrity Declaration I declare that, except where I have referenced, the work I am submitting for this assessment task is my own work. I have read and am aware of the Torrens University Australia Academic Integrity Policy and Procedure viewable online at http://www.torrens.edu.au/policies-and-forms. I am aware that I need to keep a copy of all submitted material and their drafts, and I will do so accordingly.

1

1. Introduction This section serves as the statement of purpose for your report. This means that you will tell the reader “what are going to cover in your report”.

You will need to inform the reader of:

 Your area of research and its context  The key concepts of cybersecurity you will be addressing and why you are drawing the threat

model  What the reader can expect to find in the body of the report.

2. Main Discussion You will need to respond to the specific requirements of the case study/scenario.

It is advised that you use the case scenario/study to assist you in “structuring” the Threat Model Report, drawing DFD and presenting the diagram by means of “subheadings” in the body of the report.

IMPORTANT NOTE: Make sure to pay careful attention to the “Task Instruction” on page 1 and 2 of MIS607 Assessment Brief 2.

3. Conclusion The conclusion section is where you will need to summarise any findings or recommendations that the report puts forward regarding the concepts covered in the report. Overall, the conclusions section reminds the reader what the paper has been about.

4. References It is expected that you use 10 external references in the relevant subject area based on your readings and further research. Make sure to use more academic related references (e.g. Journal Articles, Book Chapters and etc.). It is essential that you use and focus on APA Referencing Style (APA 6th Edition) for referencing.

2

IMPORTANT NOTES:  Please submit ONE WORD DOCUMENT (.doc OR .docx) via the MIS607 Assessment 2

submission line on your MIS607 Blackboard page.  Please make sure to use font Arial or Calibri 11 point, line spacing 1.5 and insert page numbers

on the bottom of each page.  MIS607 Assessment 2 is an “individual” assessment and should be submitted by 11:55 PM AEST

Sunday of Week 7 (End of Module 4.1)  This Assessment should be Maximum 1500 Words (+/- 10%) and is 35% of the final mark.  The Cover Page, Academic Declaration Paragraph, and References are not included in the word

count.  All Figures/Tables require being labelled and numbered appropriately (e.g. Table 1….., Table

2……).  All Figures/Tables require being initially introduced and then discussed in-detail and in-depth.  The sources for the used information within the Figures/Tables require being clearly inserted.  Please make sure to review the MIS607 Assessment 2 Brief and the Marking Rubric and be in

touch if any further clarification is required.