Final draft

Running Head: Response 22

remove the running head above.

Please see the sample student papers at the bottom of the assignment instructions for how to do the manual’s title page.

Manual title goes here in the center of the page, bold-faced and in a larger font size. Your name and the date go at the bottom of the page.

Document should be 8-10 pages MAX., not including the title page, Table of Contents/List of Illustrations and Reference list.

Response

Marisa Smith

January 28, 2019

You are missing the Table of Contents and List of Illustrations.

Introduction: Comment by kmatthes214: Center level 1 APA headings. Do not full justify the text. Right margin of the text should be uneven, not even. That is called left justification.

A digital camera is a camera that is used to captured videos and picture. Every camera is unique in its qualities and features. The cameras of today are digital with or without interchangeable lenses. However, high end, high definition camera are mostly used by professionals but other people also use it as per their interest. The digital camera of today has different features that display the picture or video on the screen immediately after being recorded. These images are then stored in the memory that is transferred to portable devices. So that, these images can be stored in multiple ways. Moreover, the features of digital camera varies from model to model and also from company to company. Some cameras can crop, stitch and edit the pictures at the same time. Comment by kmatthes214: Use block paragraph format = do not indent the first sentence of the paragraph. Read the formatting instructions on the assignment instructions page.

The camera that is discussed in this paper is “Interchangeable lens digital HD video camera recorder” of SONY. This company is considered as a well – reputed in producing high quality digital camera. The high technological features of this camera makes it is desirable for the people due to its high quality videos and pictures (Lindblom, 2016). This camera can be used in multiple ways depend on its usage. It can either be used for capturing photos or recording a video. The interchangeable lens features of this camera makes is desirable for professional photographers. Before using this camera there are number of steps are followed properly so that this camera can get operational (Adorama.com, 2018).

Important components of camera and its definition s: Comment by kmatthes214:

List o f parts of camera Comment by kmatthes214: Use left justification for this text in the left column so that it aligns at the left of the box. I have reformatted the second one to show you. Make the images smaller. They should not take up 5 pages of the manual. The other way to do this is to put the images in the text where you are talking about the item.	Images of these parts.
AC adaptor / charger: It is a type of external power supply that gives power to the camera.
Power cord: It is an electric cable that transfer power from switch to battery for charging.
Rechargeable battery pack: It an extra battery with the camera so that it can be changed with the other one.
Wireless remote commander: It is helps to control the camera from distant places.	(pro.sony, 2018)
Component video cable: This cable is a combination of both audio and video cable that transfer video and audio separately.
A/V connecting cable: It is a type of electric connector that is used to carry both audio and video signals. The one end connected with the camera and the other one with laptop or computer.
USB cable: It is used to transfer data from USB to desired computer or laptop.
USB Adaptor cable: It is a connector between the USB and the camera so that data can be transferred.
Large LCD viewfinder: This large LCD viewfinder is used to focus and frame the desired picture. The one end of this side is pressed against the face.
Large eyecup: It is a small oval cup with a rim that is curved in shape so that it can fit to the orbit of the eye. Hence, it is helpful in taking right shot.
Wind Screen/ microscope: Windscreen is used to set the camera lens so that complete image can be taken.
Handle: It is used to put the camera on stand.
Grip: This grip help in holding multiple batteries. It also helps in shooting a portrait photography.
Flash Memory unit jack cover: It is used for the storage of flash so that it can be protected from any damage.
Body cap; It used in covering the lens of camera.
Zoom lens: It is portable or changeable lens that is used according to the type of image.
Lens hood: It is also known as lens shade that is used in front of lens that save it from the shade of sun so that it can prevent lens glare and lens flare. It also save the lens from scratches.
Front lens cap: It is used to cover the lens.

Using the table to organize this information is fine. However, ALL of the images require the APA figure caption underneath them.

Form the above mentioned components it is cleared that there are multiple components of this video camera that should be properly assembled. So that, this it is important to properly follow the steps. Below mentioned is the detail of every step.

Step 1: Checking the supplied accessories. Comment by kmatthes214: Don’t use Step 1, Step 2 for the instructions. This is stated in the assignment instructions under the formatting section, #9. Use a subtitle for the section and use numbered lists for the instructions. Subtitle should be at the left margin, not indented.

Firstly, all the supplied accessories of this camera must be properly checked before its assembly. In the component section of this document the list of camera accessories is added. Thus, it is important to check all these items.

Step 2: Attaching the supplied accessories

The attachment of lens will be done at the end. Separate lens for this camera are available that anyone can buy as per their choice.

Step 3: Attaching the handle

As per the direction of the arrow that is shown in the image below slide the handle into the accessory shoe.

Figure: Handle of camcorder. (anon-asia.com, 2018) Comment by kmatthes214: Review how to do an APA figure caption. Add the figure number and italicize the “Figure 1” part of the caption.

Step 4:

Then press the screw down in the clockwise direction for fasten the handle.

Figure: Fixation of handle (anon-asia.com, 2018)

Step 5: Comment by kmatthes214: Move to the next page

Different type of microphone can block the light to the lens. If you are facing such problem than the handle can be fixed towards the other way round. This can be done by removing the cap and screw of the handle slide bar. Thus, it will pull out the handle slide bar.

Figure: Microphone (anon-asia.com, 2018)

Step 6:

Reattach the microphone with the holder of the microphone’s face is to the other side. Insert the microphone bar from opposite direction on the microphone bar.

Figure: Reattach the microphone (anon-asia.com, 2018)

Step 7:

Then insert the handle slide of the bar from opposite side as it can also replace the screw and cap.

Figure: Attaching the microphone (pro.sony, 2018)

Step 8:

With the attached handle attach microphone with it.

Figure: Attachment of handle with microphone. (pro.sony, 2018)

Step 9:

1. The supplied microphone at point A will be attached with point B.

2. After that place the microphone that is at position A in the holder of microphone at position C. the model name will be facing in the upward direction. Then, close the cover and also shut the clamp.

3. Connect the microscope plug with the INPUT 1 at jack D. Fix the cable of microphone into the clamp cable.

Figure: Cable clamp. (pro.sony, 2018)

Step 10: Attaching the grip

Align the grip at position 1 and also locate the camcorder with the help of boss of the grip and screw. By choosing the angle of grip fasten it with turning knob at point 2 in clockwise direction.

Figure: Attachment of Grip

Step 11: Connect the cable to the remote jack:

By connecting the remote with the grip the recording can be started and ended by merely pressing the button on the grip.

Figure: connection of cable with remote jack. (pro.sony, 2018)

Step 12: Attaching the large LCD viewfinder with camera.

As shown in the picture mentioned below, attach the view finder with the LCD screen.

Figure: LCD screen. (pro.sony, 2018)

Moreover, there are two ways through which the view finder can be used.

Figure: Different uses of LCD screen. (pro.sony, 2018)

Step 13: Adjusting the view finder lens

The lens ring can be turn as per the requirement of the video maker. Hence, the image will be visible on the LCD screen. Keep adjusting the lens through the ring until the picture become clear.

Figure: Adjustment of lens ring.

Step 14: Attaching the large eyecup

In any case, if the image on the large LCD is not clear than large eyecup can be used. In order to attach it with the lens stretch it slightly. Than align it with the groove in the large LCD view finder.

Figure: Eyecup.

Step 15: Using the LCD screen

The LCD screen is placed above the centerline of the lens. It is placed at the same angle as the lens lies to view the subject. The LCD screen can be rotated right and left. Hence, it allow the person other than the camera man to see the image.

Figure: Rotation of LCD screen.

Step 16: Use of LCD hold dial

The LCD screen angle can be adjusted by turning the LCD hold dial. It can be done by loosen the LCD hold dial in order to change the angle.

Figure: LCD hold dial.

Step 17: charging the battery pack

The battery of the camera is directly charged with the AC charger.

Figure: Battery Pack (Lindblom, 2016)

At point 1, the mode switch is set to charge.

At point 2, the adapter is connected with the power code.

At point 3, the power cord main leads connects with the wall socket.

At point 4, the battery pack is placed at the slot of AC. Press it down and the slide it in the direction of the arrow as shown.

Step 18: After charging the battery

When the charger lamp is off the battery is fully charged. But still if you want to charge the batter for one more hour than the battery can be used for longer time period. Once the charger is completed remove it from the adaptor.

Step 19: Attach it with battery pack

Press the battery at the back of camcorder and also slide it right. In this way the battery is fixed in camcorder.

Figure: Attachment of Battery pack (Lindblom, 2016)

Step 20: Outside power source can also be used

The camcorder can also be used on the AC power by connecting it will the code DK 415. Thus, in thus way the camcorder can be used for longer time period without worrying about the battery.

Figure: outside power source (anon-asia.com, 2018)

At the point 1, the power code is connected with the AC adaptor.

At point 2, connect the main leads of power cord with the wall socket.

At point 3, connect the cord of DK 415 with AC adaptor.

At point 4, set the switch of the AC adaptor.

At point 5, in the direction of the arrow connect the cord with the camcorder battery.

Step 21: Attaching the lens.

The lens of camcorder must be changed away from any dusty place. So that any debris and dust cannot stuck with the lens.

Step 22

Remove the packaging lid and body cap from the camcorder body from the rear of the lens.

Step 23

The lens is mounted by aligning.

Figure: Mounting of lens. (anon-asia.com, 2018)

Step 24

Push the lens towards the camcorder body. Then turn the lens clockwise until it get locked.

Figure: Mounting indexes (Adorama.com, 2018)

Step 25: Removing the lens

For removing the lens, press the lens releasing button and turn the lens in clockwise direction until it stops.

Figure: Fixation of lens.

Step 26: Replacing of packaging lid

Body cap marks must be align on the top of mounting indexes and turn the cap in clockwise direction. Align the red line on the lens hood. Then turn the lens in clockwise direction until the red dots and line get align.

Step 27: Turning on the camcorder and setting the time and date

Turning on the camcorder:

By pressing the green button the camera will be on.

Figure: Tuning of camcorder. (Lindblom, 2016)

Step 28: inserting a memory card

Open the cover at the bottom of camera as shown by the arrow.

Figure: Memory card slot. (Lindblom, 2016)

Insert the card in the notched edge.

In this way the assembling of new camcorder is finished. After this, it is ready for use.

References Comment by kmatthes214: Reference list goes on a new page. Do not put the title in blue font color.

Adorama.com. (2018, 2 9). Best 4K Video Cameras. Retrieved from Adorama.com: https://www.adorama.com/alc/best-4k-video-cameras

anon-asia.com. (2018, 1 1). Knowing the Different Parts of the Camera. Retrieved from anon-asia.com: https://snapshot.canon-asia.com/article/en/lesson-2-knowing-the-different-parts-of-the-camera

Lindblom, O. (2016, 3 16). Interchangeable-Lens Camera . Retrieved from videomaker.com: https:/www.videomaker.com/article/b02/18425-interchangeable-lens-camera-buyer-s-guide

pro.sony. (2018, 1 1). Camcorders. Retrieved from pro.sony: https://pro.sony/en_AL/products/camcorders

You are using the 5th edition APA Manual format. We use 6th APA manual in this class. See the models in the APA Style Guide provided for you in the Contents area of the class at the bottom.

All of these images must be listed separately in the reference list.

This information is located in the APA Style section of the class menu.

Format for an Electronic Image See OWL's APA section on Figures --"Preparing Figures" and "Captions and Figures" sections--to see how to list the information under the image. Captions replace the in-text citation. Reference list: Author. (Role of Author). (Year image was created). Title of work [Type of work], Retrieved from URL Kulbis, M. (Photographer). (2006). Men pray [Photograph], Retrieved from http://accuweather.ap.org/cgi-bin/aplaunch.pl Format for an Electronic Image with no author See OWL's APA section on Figures --"Preparing Figures" and "Captions and Figures" sections--to see how to list the information under the image. Captions replace the in-text citation. Reference list: Title of work. [Type of work]. (Year image was created). Retrieved from URL Japanese Geisha. [Photograph]. (2006). Retrieved from http://www.bergoiata.org/fe/divers28/10.htm Format for an Electronic Image with no author, title or date See OWL's APA section on Figures --"Preparing Figures" and "Captions and Figures" sections--to see how to list the information under the image. Captions replace the in-text citation. Reference list: [Subject and type of work]. Retrieved from URL [Untitled photograph of a baby chimpanzee]. Retrieved from http://perso.wanadoo.fr/jdtr/struc/chimp3.htm

This information can be found in the APA Style section of the class menu.

Nonperiodical web document, web page or report Author's last name, initial(s). (publication year). Title of document. Retrieved from http://Web address Siemens, G. (2004). Connectivism: A learning theory for the digital age. Retrieved from http://www.elearnspace.org/Articles/connectivism.htm

This information can be found in the APA Style section of the classroom.

References Rules · References start on a new page after an assignment. · Type the title References (if more than one source is listed) or Reference (if only one source is listed) and center it on the page. · Do not underline, italicize or bold-face the Reference title or put it in quotation marks or ALL CAPS. · Do not put the Reference title in a bigger font size or a different font color than black. · Do not put a colon after the Reference title. · Do not put the Reference title in a larger font size or different font color. · All authors cited with in-text citations in your assignment must appear in the Reference list. · Author's name format: Last name, initial(s). · Use an ampersand (&) instead of the word "and" when listing multiple authors. · Sources should be double spaced (2.0 line spacing). · Sources should be in hanging indent style with no blank lines between the sources. · Sources should be in alphabetical order by author's last name (or article title if no author). · Do not number or bullet-point your sources. · Each section of information is separated by periods. · Book, journals (and their volume numbers), magazines and newspaper titles should be in italics font. · CAPITALIZATION RULE FOR SOURCE TITLES: Capitalize the first word of the title and the first word of a subtitle after a colon; all other title words should be lower case letters, except for proper nouns and acronyms. · Web links should not be active (blue, underlined and clickable). · We no longer use retrieval dates in 6th edition APA style. · Do not italicize or use quotation marks around article titles. · Use the correct information, order of information, and punctuation for your source type - use the formula/template to guide you.