Cisco Packet Tracer Labs

LAB2/Lab 2 Instructions(3).docx

Liberty University CSIS331

Liberty University

CSIS 331

Lab 2 Instructions

(Names of devices may vary)

Packet Tracer - Skills Integration Challenge

Addressing Table (Address Table will vary)

Device	Interface	IP Address	Subnet Mask
			255.255.255.0
			255.255.255.0
			255.255.255.0
			255.255.255.0

Objectives

         Configure hostnames and IP addresses on two Cisco Internetwork Operating System (IOS) switches using the command-line interface (CLI).

         Use Cisco IOS commands to specify or limit access to the device configurations.

         Use IOS commands to save the running configuration.

         Configure two host devices with IP addresses.

         Verify connectivity between the two PC end devices.

Scenario

As a recently hired LAN technician, your network manager has asked you to demonstrate your ability to configure a small LAN. Your tasks include configuring initial settings on two switches using the Cisco IOS and configuring IP address parameters on host devices to provide end-to-end connectivity. You are to use two switches and two hosts/PCs on a cabled and powered network.

Requirements (Switch information may vary)

         Use a console connection to access each switch.

         Name _________ and ________ switches.

         Use the ________ password for all lines.

         Use the ________ secret password.

         Encrypt all clear text passwords.

         Include the word warning in the message-of-the-day (MOTD) Banner.

         Configure addressing for all devices according to the Addressing Table.

         Save your configurations.

         Verify connectivity between all devices.

Note: Click Check Results to see your progress. Click Reset Activity to generate a new set of requirements. If you click on this before you complete the activity, all configurations will be lost.

Page 2 of 2