Incorporation of work

	The Floating Seahorse
	Student ID
	Date — Course Name — Professor’s Name

Explanation of construction process and alternative use of proposed concrete in that construction

Rigid pavements with a reinforced concrete pavement base, concrete roads are classified as rigid roads. The road alignment and formation preparation are the two processes of road construction. The purpose of the road alignment is to ensure safe driving on the highway corridor. Comment by Author: I don’t know why the roads and their data came in between this doc

(1) The horizontal alignment, which is governed by the horizontal movement and curves, is the first of the alignments. (2) Tt the hills, the vertical alignment, describing the vertical curves for comfortable driving for all vehicles (using super-elevation etc.). The initial surface on which the road structure will be mounted is the roan formation level. As a result, it must be made sufficient and adequate in this regard.

Construction of a rigid pavement; the subgrade layer is composed of the following layers. The level below which the road is formed the layer of the subbase and base. The subbase is a high-strength, high-quality layer on the subgrade; however, because the pavement is concrete, the subbase and base layer might be regarded a single unit known as the base layer. The layer is designed and built as a structural unit to sustain the weight of the cars and the predicted traffic on the road. Surface layer with a bituminous finish. To provide a smooth riding/driving surface as well as a cover for the concrete base.

Introduction of seahorse structure

Kleindienst Architects built and unveiled the Floating Seahorse at the Dubai International Boat Show in March 2015. It is essentially a boat and a submersible without any motor. It has three levels: an underwater level, a water level, and an above deck. The architects plan to build an artificial coral reef beneath it, where the endangered Arabic seahorse will be able to reclaim its former home and be admired in all its beauty, according to the architects. The fact that it was built in the mass-production era distinguishes it from most architectural undertakings. Something we've seen previously in architecture, particularly on housing projects and complexes.

Using EPF concrete in Seahorse structure

Researchers and engineers with the vision to maintain development activities current while reducing costs could explore for other building materials. In this paper, an attempt is made to examine the possibilities of using EPS concrete in seahorse structure, a packing material in the form of beads in concrete that is otherwise providing a waste disposal and waste management danger. Environmentalists are worried about this substance. The goal of this research is to use EPF beads to partially replace coarse aggregates. Under uniaxial loading, the effect of EPF content on failure mode, stress-strain relationship, and elastic modulus of expanded polystyrene aggregate concrete (EPAC) was examined. The examined concrete had a density of less than 800 kilograms per cubic meter. EPAC was claimed to have good compressibility, and specimens tested under compression showed the development of an apparent oblique crack. Comment by Author: I told you , please tell the why the EPS concrete used in structure and importance but you tell my work is danges to that construction. Comment by Author: Who said beads Comment by Author: It mentions like my work is not sutable for this construtions

Advantages of using EPF concrete in seahorse structure

In some circumstances, such as a medical emergency, repayment of a home loan, building or acquisition of a new home, remodeling of a home, children's weddings, or self-employment, EPF enables partial fund withdrawals. In the event of a financial emergency, an EPF member can also obtain a loan with a 1% interest rate. The EPF account earns a better rate of return than a traditional savings account. The excess contribution is referred to as the 'Voluntary Provident Fund' when an employee wishes to donate more than the minimum necessary contribution. All PF accounts must be split into two accounts: one for the taxable contribution and interest earned on that component, and another for the non-taxable contribution, which includes the PF account's closing balance as of March 31, 2021, as well as all new non-taxable contributions and interest. Comment by Author: What is this nonsense Comment by Author: Its about concrete not loans Comment by Author: What is savings account Comment by Author: I don’t know what is this Comment by Author: Why it came in between this doc

Proper BIM data for the use of mentioned construction work

BIM is a design and construction method used by architects. The procedure incorporates a variety of design tools and approaches with the ultimate goal of making every phase of building and design as efficient, safe, and cost-effective as feasible. BIM is a method of organizing and managing data and information about a construction project in order to create a building information model that can include a digital description of each asset. Building and facility operations and maintenance can account for up to 85% of the overall cost of the structure. 3D visualization, clash detection, feasibility analysis, constructability assessment, quantity take-off and cost estimate, 4D/scheduling, environmental/LEED analysis, producing shop drawings, and facility management are all BIM applications in the AEC industry. BIM has the ability to increase construction efficiency, boost team communication and knowledge exchange, and assist with construction-related activities. Using BIM throughout a project decreases risks by increasing efficiency, reducing errors or misinterpretations among designers, engineers, and contractors, and demanding collaboration and knowledge exchange among all parties involved to assure correctness and reliability. Comment by Author: I am asking how BIM works used in sears construction not what is BIM

Construction procedure of seahorse structure

Due to their uneven range and low density, as well as their cryptic nature, there is a scarcity of ecological data on seahorses (Foster and Vincent 2004). These characteristics make it especially challenging to survey, measure, and monitor the health of their people, whether for scientific study or commercial development initiatives like environmental impact assessments prior to construction activity. Only one seahorse species, which is restricted to three estuaries in South Africa, has had a range-wide ecological evaluation completed to yet. The majority of European seahorse research has been focused on a few tiny focal areas. Comment by Author: Biology is mixing in construction what a senseless Comment by Author: Zovalaoagy mixing

What of materials used in seahorse structure

The group chose glass-reinforced plastic (GRP) covering for the Seahorse Villas' construction because of its flexibility, according to Bolzoni. A "floating platform that curves to create a roof" is the goal for the villas. However, by incorporating ocean ownership into the title deed, the value of each house will skyrocket. "We wanted to mirror the beauty of the sea; we wanted to have the close interaction with water that a boat has, but with the luxury and comfort of a villa.""As a result of its vessel title, the structure can be moved at any moment, while the sea space is protected by its real estate title," says the author. Comment by Author: Why glass power came in this work I don’t know Comment by Author: What is this Comment by Author: What is this nonsense irrelevant to heading

Design model of seahorse structure

Comment by Author: Am asinking desing model not history and more over you already mentioned on top agin what is this

You may have heard of The World in Dubai, a global landmark consisting of 300 islands reclaimed from the water in the shape of a world map and home to an iconic collection of private and resort islands. The Heart of Europe, a cluster of six islands modelled after Europe, may be found within The World. The Floating Seahorse Villas, which are three-level luxury houseboats with the lowest levels submerged underwater, are located within that.

Comment by Author: Same as above comment

Kleindienst Group owns the cluster of six islands on The World project, which was designed to capture the true aesthetic and cultural riches of European cities. The Floating Seahorse, the world's first luxury underwater living experience with a view of the Arabian Gulf, is located in the heart of Europe. It is also home to the world's largest natural aquarium, The Floating Seahorse. The photographs below are real photos of the Floating Seahorse, not computer-generated representations that are often circulated on the internet.

BIM process of seahorse structure

We found that using technology, such as building information modelling (BIM) for various construction processes across all six islands on The Heart of Europe, as well as aerial photography and drones to define the exact layout of each area, was particularly helpful during the early stages of the project planning. The Floating Seahorses are linked to the heart-shaped island by specially designed pathways made of concrete and timber platforms. This ensures that the flooring is both durable and low-maintenance, as well as matching the island concept. We found that utilizing technology, such as BIM for various construction procedures on all six islands, was extremely beneficial. One of the most crucial parts of The Heart of Europe is ensuring the island's and its terrestrial and marine environments' long-term viability. The island provides a calm environment with 300m of coastline thanks to the perfect mixing of natural and man-made components. Comment by Author: Unnecessary data

Floating concept of seahorse structure

Kleindienst Architects built and unveiled the Floating Seahorse at the Dubai International Boat Show in March 2015, which is essentially a boat and a submersible with no motor. It has three levels: an underwater level, a water level, and an above deck. The 'floating seahorse,' built by a team of architects and interior designers, offers four movable living / sleeping rooms to ensure an amazing trip experience. Each unit can also be adjusted to provide the utmost in seclusion by completely enclosing the outdoor areas on both the lower and upper levels. These outdoor spaces, when not covered, can be used for year-round alfresco entertaining. Comment by Author: Already mentioned this point on above again why you mentioned I don’t know

Clear explanation work with clear representation

"The Floating Seahorse is designed to be used on breakwaters.""It sank because it was placed out on the strong seas for which it was not constructed," he explained. So, how did it get there in the first place? According to Kleindienst Group, they had moved it there for a New Year's Eve party. It was used as the center stage for the party, providing lights, music, and DJs to surrounding yachts from which revelers viewed the New York fireworks. That night, nothing unusual occurred. It did, however, happen three days later. Fortunately, there were no passengers on board. "There was no one inside or near the house," stated Lt. Col. Ahmad Atiq Burqibah, Deputy Director of the Dubai Police's Search and Rescue Department. "We sped to the spot and arrived in eight minutes. “The waters were rough and the waves were 6 to 8 feet high,” he remembered. A model of a floating seahorse that keeled over while being brought to Europe's heartland. The Floating Seahorse, billed as the pinnacle of luxury and extravagance, is a crucial component of Kleindienst's The Heart of Europe development, a manufactured island on The World Islands, and some 4 km off Dubai's coast. The corporation has been pushing it heavily throughout the city's malls. The project has received rave reviews in major local and international newspapers on a regular basis. It was also filmed for the Discovery Channel's Impossible Builds series by a UK-based production company. Comment by Author: OMG what is this I read -2-3 times I what is this data and why it is related to this work

Comment by Author: This is not seahourse structure image

Model presentation of seahorse structure

Bolzoni goes on to highlight the unique problems of constructing such a large project offshore. "With time, we realized that in order to build here, we needed to be as self-sufficient as possible," he says, adding, "Of course, independent consultants are a tremendous resource when needed." For example, we have JK Bauen based here, as well as our own GRP team. Rather than hiring a specialist, we'd prefer to form our own team. Sure, there are some things we can't do, but we've honed our skills through time." Comment by Author: ?

Comment by Author: No use

Comment by Author: Not a sea hourese structure

Personal reflection for making thing project

We wanted to capture the beauty of the water, to have the close interaction with the water that a boat has, but with the elegance and comfort of a villa. "I usually conceive of weight sitting on top of the foundation, but weight behaves in a completely different way in this case." For any construction that is in water, I learned that symmetry and regular shapes are essential." According to Bolzoni, the weight distribution of the Seahorse Villas is "totally unbalanced.""A marble-covered bathroom may be in one corner of the villa, while the opposite corner could be quite vacant, adding very little weight to the overall construction." Given the underwater vistas offered by the Seahorse Villas, maintaining a healthy seascape is critical. "Our villas overlook an undersea realm, not a garden," he explains. "Instead of gardeners, we have a dive team and a marine biologist who look after everything around the Seahorse Villas." With time, we realized that in order to build here, we needed to be as self-sufficient as possible, relying on independent consultants as little as possible. Because of the project's unique and demanding requirements, the developer will need to hire an additional "250 staff every month" to meet the first phase's late 2019 completion deadline. The Floating Seahorse is an absolutely one-of-a-kind aquatic product. It's a private marine hideaway with its own plot in the Arabian Gulf (basically a boat without propulsion). It is an iconic and one-of-a-kind premium lifestyle product that was unveiled at the Dubai International Boat Show in March of 2015. The Signature Edition of The Floating Seahorse offers tremendous versatility with four exi-living and sleeping rooms, each of which may be customized to meet individual needs. By completely enclosing the outside areas at sea level and on the upper deck, the Floating Seahorse may be modified to provide the ultimate in solitude. The Floating Seahorse's Signature Edition is geared toward families and groups with children. The Floating Seahorse can be completely modified and tailored to fit your particular style and preferences. Each Floating Seahorse will be one-of-a-kind and unique, inspired by the genuine meaning of a signature. Comment by Author: I asked personal reflection with headings like Introduction Project info Definition of the Issue Project Summary Project Methodology Definition of Deliver as well as the success criteria Stating the Plan and Approach Risk Analysis & Management Outing the Schedules Ending the Proposal You didn’t do that and What evere you wrore the data is not related to personal refelection of the project No use of this data

General conceptual costing matter like imagination cost of construction materials and if proposed concrete and on alternative original material report

The aptly called "Floating Seahorse," a $2.8 million floating residence that arrived in the Heart of Europe earlier this year, was the first of its kind. They now plan to construct even larger mansions, with a price tag of $12 million. According to design firm Kleindienst Group, the $2.8 million Floating Seahorse is the culmination of over 5,000 hours of research and 13,000 hours of design and engineering. The cost of a single or numerous rooms in a Floating Seahorse Villa is between $10 million and $16.5 million. The cost of renting a room for one night can range from $10,000 to $25,000 per night.

Appendix

Appendix A

Appendix B

Company Profile, product image and specification, capacity, production, price, cost, revenue, and contact information are all provided in the Global Floating Seahorse Market report. In addition, downstream demand analysis and upstream raw materials and instruments are provided. The market development trends and marketing channels for the Global Floating Seahorse are investigated. Finally, the viability of recent investment projects is evaluated, and the overall study conclusions are presented (BIM-based mobile augmented reality environment in facility management practices,” Facilities, vol. 34, no. 1/2, pp. 69–84, 2016.)

References

Y. Lu, L. Yongkui, M. Skibnievski, Z. Wu, R. Wang, and Y. Le, “Information and communication technology applications in architecture, engineering, and construction organizations: a 15-year review,” Journal of Management in Engineering, vol. 31, no. 1, Article ID A4014010, 2015.View at:  Publisher Site  |  Google Scholar

C. Botton and D. Forgues, “Practices and processes in BIM projects: an exploratory case study,” Advances in Civil Engineering, vol. 2018, Article ID 7259659, 12 pages, 2018.View at:  Publisher Site  |  Google Scholar

S. Lee, J. Yu, and D. Jeong, “BIM acceptance model in construction organizations,” Journal of Management in Engineering, vol. 31, no. 3, Article ID 04014048, 2015.View at:  Publisher Site  |  Google Scholar

M. Gheisari and J. Irizarry, “Investigating human and technological requirements for successful implementation of a BIM-based mobile augmented reality environment in facility management practices,” Facilities, vol. 34, no. 1/2, pp. 69–84, 2016.

J. Wang, X. Wang, J. Wang, P. Yung, and G. Jun, “Engagement of facilities management in design stage through BIM: framework and a case study,” Advances in Civil Engineering, vol. 2013, Article ID 189105, 8 pages, 2013.View at:  Publisher Site  |  Google Scholar

Y. Liu, S. van Nederveen, C. Wu, and M. Hertogh, “Sustainable infrastructure design framework through integration of rating systems and building information modeling,” Advances in Civil Engineering, vol. 2018, Article ID 8183536, 13 pages, 2018.View at:  Publisher Site  |  Google Scholar

Y. Ahn, H. Kwak, and J. Suk, “Contractors’ transformation strategies for adopting building information modeling,” Journal of Management in Engineering, vol. 32, no. 1, Article ID 05015005, 2016.View at:  Publisher Site  |  Google Scholar

C. Eastman, P. Teicholz, R. Sacks, and K. Liston, BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers, and Contractors, John Wiley and Sons, Hoboken, NJ, USA, 2nd edition, 2011.

Cefrio, Improving Efficiency and Productivity in the Construction Sector through the Use of Information Technologies, NRC Industrial Research Assistance Program, Quebec, Canada, 2011.

R. Borden, “Taking School Design to Students”, National Clearinghouse for Educational Facilities, National Institute of Building Sciences, Washington, DC, USA, 2004.

J. Cohen, Integrated Project Delivery: Case Studies, AIA California Council, Sacramento, CA, USA, 2010.

Neasden Primary School, Application of BIM in Energy Management of Individual Departments Occupying University Facilities, Neasden Primary School, Hull, UK, 2019,  https://neasdenprimary.org.uk/school-new-build/ .

Dezeen, Visual Arts Building Animation, Iowa University School of Art & Art History, Iowa City, IA, USA, 2019,  https://vimeo.com/76039896 .

Tigard-Tualatin School District, Video Walkthrough Released for Tualatin HS Design, Tigard-Tualatin School District, Tigard, OR, USA, 2019,  https://www.ttsdschools.org/site/default.aspx?PageType=3&DomainID=21&ModuleInstanceID=10379&ViewID=6446EE88-D30C-497E-9316-3F8874B3E108&RenderLoc=0&FlexDataID=16640&PageID=63 .

J. Zhang and R. Issa, “Collecting fire evacuation performance data using BIM-based immersive serious games for performance-based fire safety design,” in Proceedings of the 2015 International Workshop on Computing in Civil Engineering, pp. 612–619, Austin, TX, USA, June 2015.View at:  Google Scholar

E. Vaughan, “Elementary School”, Whole Building Design Guide, National Institute of Building Sciences, Washington, DC, USA, 2017, available at:  https://www.wbdg.org/building-types/education-facilities/elementary-school .

H. Eckerlin, “An Evaluation of Daylighting in Four Schools in the Research Triangle Area of North Carolina,” North Carolina State University, Raleigh, NC, USA, 2005, A Summary Report.View at:  Google Scholar

Innovative Design, Guide for Daylighting Schools, Lighting Research Center, Rensselaer Polytechnic Institute, Troy, NY, USA, 2004.

K. Tu and D. Vernatha, “Application of Building Information Modeling in energy management of individual departments occupying university facilities,” World Academy of Science, Engineering and Technology International Journal of Architectural and Environmental Engineering, vol. 10, no. 2, 2016.View at:  Google Scholar

H. Gocke and K. Gocke, “Integrated system platform for energy efficient building operations,” Journal of Computing in Civil Engineering, vol. 28, no. 6, Article ID 05014005, 2014.View at:  Publisher Site  |  Google Scholar

J. Irizarry, M. Gheisari, G. Williams, and K. Roper, “Ambient intelligence environments for accessing building information,” Facilities, vol. 32, no. 3/4, pp. 120–138, 2014,  https://doi.org/10.1108/F-05-2012-0034 .View at:  Google Scholar

J. Won, G. Lee, C. Dossick, and J. Messner, “Where to focus for successful adoption of building information modeling within organization,” Journal of Construction Engineering and Management, vol. 139, no. 11, Article ID 04013014, 2013.