Numerical computation Project

Experimental paper template/Latex/Example/cinc.cls

%% cinc.cls %% %% Adaptation of IEEEtran2e.cls to suit the format of the proceedings %% of "Computers in Cardiology" %% Hans A. Kestler {[email protected] OR [email protected]} %% %% %% History: %% * 1st version 6-October-1999 %% * 1st revison 8-March-2000 %% - fix table captions (no indent, no \sc) %% - full figure name, e.g. Figure instead of Fig. %% - same with table %% * 2nd revision 29 July 2004 (George Moody, [email protected]) %% - fixed margins %% - fixed spacing around ((sub)sub)section headers %% - added subsubsection defs to match section and subsection %% - fixed position of title block %% * 3rd revision 6 October 2004 (George Moody) %% - when using this file with pdflatex, the /Creator tag %% is now set to CinC-2004 %% * 4th revision 14 September 2005 (George Moody) %% - re-enabled hyphenation %% - fixed margins %% - settings for pdflatex now included here (pdftex.cfg is %% obsolete) %% * 5th revision 20 July 2006 (George Moody) %% - added 'balance' (to equalize columns on final page; %% thanks to Erik Bojorges for the suggestion) %% * 6th revision 11 June 2008 (George Moody) %% - added 'cite' (to collapse refs, e.g. [3,4,5] -> [3-5]; %% thanks to Phil Stewart for the suggestion) %% - pdflatex /Creator tag is now CinC-2008 %% * 7th revision 2 September 2013 (George Moody) %% - uses 'ifpdf.sty' if available %% - pdflatex /Creator tag is now CinC-2013 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% %% (hopefully) minor changes for \LaTeXe %% by Peter N"uchter (!PN) [email protected] %% all changes marked with !PN %% %% WARNING: math font problems and workaround: %% Standard math commands like %% $\mathbf{N}(0,P(0))$ %% will not work properly. The reason is, that this is %% a simple hack of an old LaTeX2.09 style files. %% To get it running, I used the packages %% 'rawfonts' and 'oldlfont' %% They are responsible for the font problems. %% This is a known feature, see %% http://www.tex.ac.uk/CTAN/latex/bugs.html %% %% WORKAROUND: %% Use an additional pair of braces, like %% {\mathbf{y}} %% to introduce an additional level of scope. %% Examples: %% $\mathbf{N}(0,P(0))$ but ${\mathbf{N}}(0,P(0))$ %% $\mathcal{N}(0,P(0))$ but ${\mathcal{N}}(0,P(0))$ %% $\mathcal{G}_{t}$ but ${\mathcal{G}}_{t}$ %% $\mathfrak{G}_t$ but ${\mathfrak{G}}_t$ %% %% %% Changes: 10.01.1996 %% \@maxsep removed %% \@dblmaxsep removed %% \typeout{Upgraded to `IEEEtran.cls' <10-Jan.-1996>.} added %% \usepackage{rawfonts} added %% \usepackage{oldlfont} added %% \renewcommand{\normalsize}{\fontsize{10}{12}\selectfont} added %% \AtBeginDocument{\parindent1.0em} added %% %% Changes: 14.05.1996 %% \setlength - bock added. %% \renewcommand{\normalsize}{... hopefully fixed! %% \topsep defs inserted at pointsize declarations %% ^^-- this is a little bit tricky. I fiddled around until %% I nearly obtained the same result as with LaTeX209. %% I think we can live with that now? %% %% Changes: 1.5.1997 %% Inclusion of math-font-problem-section on top of this file! %% %% %% Resulting Differenzes between \LaTeX209 and \LaTeX: %% Slightly different formatting. %% %% %%%%%%%%%%%%%%%%%%%%%%%%%%%%% IEEEtran.sty %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%% =========================================================================== %%% @LaTeX-style-file{ %%% author = "Gerry Murray and Silvano Balemi", %%% version = "2.5.4", %%% date = "30-August-1993", %%% filename = "IEEEtran.sty", %%% address = "Automatic Control Lab, ETH Zurich, Switzerland" %%% email = "[email protected], %%% keywords = "LaTeX, IEEE Transactions, publisher style", %%% mainserver = "via E-mail from [email protected] ", %%% docstring = "This is a LaTeX style file for preparation %%% of submission and final versions of articles %%% to be published in IEEE Transactions. %%% The default font size is 10 points but 9pt, %%% 11pt and 12pt are available too. %%% %%% Usage: %%% \documentstyle[..,Xpt,twoside]{IEEEtran} %%% \author{..} %%% \title{..} %%% \maketitle %%% \begin{abstract}...\end{abstract} %%% \begin{keywords}...\end{keywords} %%% ... %%% \begin{biography}{Author's name}...\end{biography} %%% \end{document} %%% %%% The command "\markboth{leftTEXT}{rightTEXT}" %%% puts the text "leftTEXT" and "rightTEXT" %%% with the page number on the even resp. odd %%% headers when the "twoside" option is selected. %%% (Attention: header of title page is %%% always "leftTEXT" as it bears the journal name). %%% In order to remove headers, insert %%% \thispagestyle{empty}\pagestyle{empty} or %%% \thispagestyle{plain}\pagestyle{plain} %%% right after the \maketitle command!! %%% %%% See also IEEE.bst and IEEEsample.tex", %%% } %%% =========================================================================== %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \NeedsTeXFormat{LaTeX2e} %!HAK \ProvidesClass{cinc}[2013/09/02] %!HAK, GBM \typeout{Document Class `cinc.cls' <02-September-2013>.} \typeout{Adapted from IEEEtran2e.cls by H.A. Kestler, revised by G.B. Moody} \usepackage{balance} % GBM \usepackage{cite} % GBM, suggested by Phil Stewart \usepackage{rawfonts} %!PN \usepackage{oldlfont} %!PN \IfFileExists{times.sty}{\usepackage{times}}{\@missingfileerror{times}{sty}} %!HAK % Detect PDF output mode (GBM, based on Heiko Oberdiek's ifpdf.sty) \IfFileExists{ifpdf.sty}{\usepackage{ifpdf}}{ \newif\ifpdf \ifx\pdfoutput\undefined \else \ifx\pdfoutput\relax \else \ifcase\pdfoutput \else \pdftrue \fi \fi \fi } %!PN, 14.05.96 \renewcommand{\normalsize}{\fontsize{10}{12}\selectfont} %!PN % this always resulted in a 10pt doc ....., sorry \renewcommand{\normalsize}{\@normalsize} %!PN \newcommand{\exclude}[1]{} %!HAK \AtBeginDocument{\parindent1.0em} %!PN %% enable hyphenation % GBM %%\hyphenpenalty10000 % disable hyphenation %!HAK %% define new needed boolean variables \newif\if@tmptwocolumn \@tmptwocolumnfalse \newif\if@draftversion \@draftversionfalse \newif\if@technote \@technotefalse \def\@ptsize{10} \@namedef{ds@9pt}{\def\@ptsize{9}} \@namedef{ds@10pt}{\def\@ptsize{10}} \@namedef{ds@11pt}{\def\@ptsize{11}} \@namedef{ds@12pt}{\def\@ptsize{12}} \@namedef{ds@twoside}{\@twosidetrue \@mparswitchtrue} \@namedef{ds@draft}{\global\@draftversiontrue} % sets variable for draft \@namedef{ds@technote}{\global\@technotetrue} % sets variable for techn. note %% the file twocolumn.sty is not read as it changes \textwidth. %% Next line sets @tmptwocolumn to true which lets later execute \twocolumn \@namedef{ds@twocolumn}{\global\@tmptwocolumntrue } \@options %%%%% \input IEEE\@ptsize.sty\relax %%%% FONT DEFINITION BELOW (NO FILE READ) %% change sizes and margins, !HAK \hoffset -2.75mm % GBM \voffset -37mm % GBM \topmargin 26.9mm \oddsidemargin 0.0mm \evensidemargin 0.0mm \textheight 225.0mm % GBM \textwidth 171.75mm % GBM \columnsep 8.0mm % GBM \parindent 1.0pc \headsep 6.3mm \headheight 12pt \lineskip 1pt \normallineskip 1pt \def\baselinestretch{1} \marginparsep 10pt \marginparwidth 20pt \marginparpush 25pt \partopsep \z@ \topsep 1.3ex \parsep \z@ \itemsep \z@ %% see further below for lists, !HAK %% FONT DEFINITION: avoids having to read in font files. %% %% Check if we have selected 9 points \def\@tempa{9}\ifx\@ptsize\@tempa \typeout{-- This is a 9 point document} \def\@normalsize{\@setsize\normalsize{10.7pt}\ixpt\@ixpt \abovedisplayskip 1em plus2pt minus5pt\belowdisplayskip \abovedisplayskip \abovedisplayshortskip \z@ plus3pt\belowdisplayshortskip .6em plus3pt minus3pt \topsep \belowdisplayshortskip%!PN } \def\small{\@setsize\small{9.12pt}\viiipt\@viipt} \def\footnotesize{\@setsize\footnotesize{8.15pt}\viipt\@vipt} \def\scriptsize{\@setsize\scriptsize{8pt}\vipt\@vpt} \def\tiny{\@setsize\tiny{5pt}\vpt\@vpt} \def\large{\@setsize\large{12pt}\xpt\@xpt} \def\Large{\@setsize\Large{14pt}\xiipt\@xiipt} \def\LARGE{\@setsize\LARGE{18pt}\xivpt\@xivpt} \def\huge{\@setsize\huge{22pt}\xviipt\@xviipt} \def\Huge{\@setsize\Huge{25pt}\xxpt\@xxpt} \fi %% %% Check if we have selected 10 points \def\@tempa{10}\ifx\@ptsize\@tempa \typeout{-- This is a 10 point document} \def\@normalsize{\@setsize\normalsize{11.9pt}\xpt\@xpt \abovedisplayskip 1em plus2pt minus5pt\belowdisplayskip \abovedisplayskip \abovedisplayshortskip \z@ plus3pt\belowdisplayshortskip .6em plus3pt minus3pt \topsep \belowdisplayshortskip%!PN } \def\small{\@setsize\small{9.2pt}\viiipt\@viiipt} \def\footnotesize{\@setsize\footnotesize{8.8pt}\viiipt\@viiipt} \def\scriptsize{\@setsize\scriptsize{8pt}\viipt\@viipt} \def\tiny{\@setsize\tiny{6pt}\vpt\@vpt} \def\large{\@setsize\large{14pt}\xiipt\@xiipt} \def\Large{\@setsize\Large{18pt}\xivpt\@xivpt} \def\LARGE{\@setsize\LARGE{22pt}\xviipt\@xviipt} \def\huge{\@setsize\huge{22pt}\xxpt\@xxpt} \def\Huge{\@setsize\Huge{28pt}\xxvpt\@xxvpt} \fi %% %% Check if we have selected 11 points \def\@tempa{11}\ifx\@ptsize\@tempa \typeout{-- This is an 11 point document} \def\@normalsize{\@setsize\normalsize{13.6pt}\xipt\@xipt \abovedisplayskip 1em plus2pt minus5pt\belowdisplayskip \abovedisplayskip \abovedisplayshortskip \z@ plus3pt\belowdisplayshortskip .6em plus3pt minus3pt \topsep \belowdisplayshortskip%!PN } \def\small{\@setsize\small{12pt}\xpt\@xpt} \def\footnotesize{\@setsize\footnotesize{11pt}\ixpt\@ixpt} \def\scriptsize{\@setsize\scriptsize{9.5pt}\viiipt\@viiipt} \def\tiny{\@setsize\tiny{7pt}\vipt\@vipt} \def\large{\@setsize\large{14pt}\xiipt\@xiipt} \def\Large{\@setsize\Large{18pt}\xivpt\@xivpt} \def\LARGE{\@setsize\LARGE{22pt}\xviipt\@xviipt} \def\huge{\@setsize\huge{25pt}\xxpt\@xxpt} \def\Huge{\@setsize\Huge{30pt}\xxvpt\@xxvpt} \fi %% %% Check if we have selected 12 points \def\@tempa{12}\ifx\@ptsize\@tempa \typeout{-- This is a 12 point document} \def\@normalsize{\@setsize\normalsize{14pt}\xiipt\@xiipt \abovedisplayskip 1em plus3pt minus6pt\belowdisplayskip \abovedisplayskip \abovedisplayshortskip \z@ plus3pt\belowdisplayshortskip .6em plus4pt minus4pt \topsep \belowdisplayshortskip%!PN } \def\small{\@setsize\small{11.4pt}\xpt\@xpt} \def\footnotesize{\@setsize\footnotesize{10pt}\ixpt\@ixpt} \def\scriptsize{\@setsize\scriptsize{9pt}\viiipt\@viiipt} \def\tiny{\@setsize\tiny{8pt}\vipt\@vipt} \def\large{\@setsize\large{18pt}\xivpt\@xivpt} \def\Large{\@setsize\Large{22pt}\xviipt\@xviipt} \def\LARGE{\@setsize\LARGE{25pt}\xxpt\@xxpt} \def\huge{\@setsize\huge{30pt}\xxvpt\@xxvpt} \let\Huge=\huge \fi %% Definitions for PARAGRAPHS %% \abovedisplayskip 0pt plus2pt minus5pt% \belowdisplayskip \abovedisplayskip \abovedisplayshortskip 0pt plus3pt% \belowdisplayshortskip 0pt plus3pt minus3pt% %% Definitions for LISTS %% %% Change aspect of lists with %% 1) \itemindent, label indentation wrt to left list margin %% 2) \leftmargini, the indentation of the whole list (on left, first level) \itemindent -1em \leftmargini 2em %\itemindent 2em % Alternative values: sometimes used.. %\leftmargini 0em \leftmarginii 1em \leftmarginiii 1.5em \leftmarginiv 1.5em \leftmarginv 1.0em \leftmarginvi 1.0em \labelsep 5pt \leftmargin\leftmargini \labelwidth \z@ \def\@listI{\leftmargin\leftmargini} \@listI \def\@listi{\leftmargin\leftmargini \topsep \z@ plus 1pt minus 1pt} \def\@listii{\leftmargin\leftmarginii\labelwidth\leftmarginii \advance\labelwidth-\labelsep \topsep \z@} \def\@listiii{\leftmargin\leftmarginiii\labelwidth\leftmarginiii \advance\labelwidth-\labelsep \topsep \z@} \def\@listiv{\leftmargin\leftmarginiv\labelwidth\leftmarginiv \advance\labelwidth-\labelsep \topsep \z@} \def\@listv{\leftmargin\leftmarginv\labelwidth\leftmarginv \advance\labelwidth-\labelsep \topsep \z@} \def\@listvi{\leftmargin\leftmarginvi\labelwidth\leftmarginvi \advance\labelwidth-\labelsep \topsep \z@} \def\labelenumi{\theenumi.} \def\theenumi{\arabic{enumi}} \def\labelenumii{(\theenumii)} \def\theenumii{\alph{enumii}} \def\labelenumiii{\theenumiii.} \def\theenumiii{\roman{enumiii}} \def\labelenumiv{\theenumiv.} \def\theenumiv{\Alph{enumiv}} \def\p@enumii{\theenumi} \def\p@enumiii{\theenumi(\theenumii)} \def\p@enumiv{\p@enumiii\theenumiii} \def\labelitemi{$\scriptstyle\bullet$} \def\labelitemii{\bf --} \def\labelitemiii{$\ast$} \def\labelitemiv{$\cdot$} %% \itemindent is set to \z@ by list, so define new temporary variable \newdimen\tmpitemindent \def\verse{\let\\=\@centercr \list{}{\itemsep\z@ \itemindent -1.5em \listparindent \itemindent \rightmargin\leftmargin\advance\leftmargin 1.5em}\item[]} \let\endverse\endlist \def\quotation{\list{}{\listparindent 1.5em \itemindent\listparindent \rightmargin\leftmargin \parsep 0pt plus 1pt}\item[]} \let\endquotation=\endlist \def\quote{\list{}{\rightmargin\leftmargin}\item[]} \let\endquote=\endlist \def\@mklab#1{#1} \def\description{\tmpitemindent\itemindent\list{}{\itemindent\tmpitemindent \labelwidth\z@\def\makelabel##1{\hspace\labelsep\it{##1}}}} \def\enddescription{\endlist\par} \def\enumerate{\tmpitemindent\itemindent\ifnum \@enumdepth >3 \@toodeep\else \advance\@enumdepth \@ne \edef\@enumctr{enum\romannumeral\the\@enumdepth}% \list{\csname label\@enumctr\endcsname}{\itemindent\tmpitemindent \usecounter{\@enumctr}\def\makelabel##1{\hspace\labelsep\hfil{##1}}}\fi} \def\endenumerate{\endlist\par} \def\itemize{\tmpitemindent\itemindent\ifnum \@itemdepth >3 \@toodeep\else \advance\@itemdepth\@ne \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}% \list{\csname\@itemitem\endcsname}{\itemindent\tmpitemindent \def\makelabel##1{\hspace\labelsep\hfil\it{##1}}}\fi} \def\enditemize{\endlist\par} \newif\if@restonecol \def\titlepage{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn \else \newpage \fi \thispagestyle{empty}\c@page\z@} \def\endtitlepage{\if@restonecol\twocolumn \else \newpage \fi} \arraycolsep 5pt \tabcolsep 6pt \arrayrulewidth .4pt \doublerulesep 2pt \tabbingsep\labelsep %% FOOTNOTES % \skip\footins 10pt plus 4pt minus 2pt \footnotesep 7pt \footskip 10mm \skip\@mpfootins = \skip\footins \fboxsep = 3pt \fboxrule = .4pt \long\def\@makefntext#1{\parindent .8em\indent$^{\@thefnmark}$#1} \def\footnoterule{} \if@technote \setcounter{secnumdepth}{3} \else \setcounter{secnumdepth}{4} \fi \newcounter{section} \newcounter{subsection}[section] \newcounter{subsubsection}[subsection] \newcounter{paragraph}[subsubsection] \def\thesection{\arabic{section}} %!HAK \def\thesubsection{\thesection.\arabic{subsection}} %!HAK \def\thesubsubsection{\thesubsection.\arabic{subsubsection}} \def\thesubsubsectiondis{\Alph{subsection}.\arabic{subsubsection}} \def\theparagraph{\thesubsubsection.\alph{paragraph}} \def\theparagraphdis{\thesubsubsectiondis.\alph{paragraph}} \def\theequation{\arabic{equation}} %% Section format %!HAK %% %% Start section and subsection titles after a 0.5 inch tab and %% put a period after the section and subsection number %% %% Also format subsubsection headings in the same way (GBM) % \newlength{\Mylen} \def\@seccntformat#1{\@ifundefined{#1@cntformat}% {\csname the#1\endcsname\quad}% default {\csname #1@cntformat\endcsname}% individual control } \def\section@cntformat{\thesection.\hspace*{0.5in}\settowidth{\Mylen} {\large\bf\arabic{section}.}\hspace*{-\Mylen}} \def\subsection@cntformat{\thesubsection.\hspace*{0.5in}\settowidth{\Mylen} {\large\bf\arabic{section}.\arabic{subsection}.}\hspace*{-\Mylen}} \def\subsubsection@cntformat{\thesubsubsection.\hspace*{0.5in}\settowidth{\Mylen} {\large\bf\arabic{section}.\arabic{subsection}.\arabic{subsubsection}.}\hspace*{-\Mylen}} %% LIST OF FIGURES AND TABLES % \def\@pnumwidth{1.55em} \def\@tocrmarg {2.55em} \def\@dotsep{4.5} \setcounter{tocdepth}{3} \def\tableofcontents{\section*{Contents}\@starttoc{toc}} \def\l@section#1#2{\addpenalty{\@secpenalty} \addvspace{1.0em plus 1pt} \@tempdima 1.8em \begingroup \parindent \z@ \rightskip \@pnumwidth \parfillskip-\@pnumwidth \bf\leavevmode #1\hfil\hbox to\@pnumwidth{\hss #2} \par \endgroup} \def\l@subsection{\@dottedtocline{2}{1.5em}{2.3em}} \def\l@subsubsection{\@dottedtocline{3}{3.8em}{3.2em}} \def\listoffigures{\section*{List of Figures}\@starttoc{lof}} \def\l@figure{\@dottedtocline{1}{1em}{1.8em}} \def\listoftables{\section*{List of Tables}\@starttoc{lot}} \let\l@table\l@figure %% Definitions for floats %% %% Normal Floats %% Double Column Floats \floatsep 12pt plus 2pt minus 2pt \dblfloatsep 12pt plus 2pt minus 2pt \textfloatsep 20pt plus 2pt minus 4pt \dbltextfloatsep 20pt plus 2pt minus 4pt %\@maxsep 20pt \@dblmaxsep 20pt %!PN \@fptop 0pt plus 1fil \@dblfptop 0pt plus 1fil \@fpsep 8pt plus 2fil \@dblfpsep 8pt plus 2fil \@fpbot 0pt plus 1fil \@dblfpbot 0pt plus 1fil \def\topfraction{1.0} \def\dbltopfraction{1.0} \def\floatpagefraction{0.8} \def\dblfloatpagefraction{0.8} \setcounter{topnumber}{2} \setcounter{dbltopnumber}{4} % \intextsep 12pt plus 2pt minus 2pt \setcounter{bottomnumber}{2} \def\bottomfraction{.4} \setcounter{totalnumber}{4} \def\textfraction{.2} %% redefine CAPTION \long\def\@caption#1[#2]#3{\par\addcontentsline{\csname ext@#1\endcsname}{#1}{% \protect\numberline{\csname the#1\endcsname}{\ignorespaces #2}} \begingroup \@parboxrestore \normalsize \@makecaption{\csname fnum@#1\endcsname}{\ignorespaces #3}{#1}\par \endgroup} \def\tablestring{table} \def\figurestring{figure} \newlength{\captionindent} \long\def\@makecaption#1#2#3{ \ifx\figurestring#3 \vskip 5pt \setbox\@tempboxa\hbox{\normalsize #1.~ #2} %!HAK \ifdim \wd\@tempboxa >\hsize \setbox\@tempboxa\hbox{\normalsize #1.~ } %!HAK \setlength\captionindent{\wd\@tempboxa} \divide\captionindent by 2 \parbox[t]{\hsize}{\normalsize %!HAK \unhbox\@tempboxa#2} \else \hbox to\hsize{\small\hfil\box\@tempboxa\hfil} \fi \else \vskip 5pt \setbox\@tempboxa\hbox{\normalsize #1.~ #2} %!HAK \ifdim \wd\@tempboxa >\hsize \setbox\@tempboxa\hbox{\normalsize #1.~ } %!HAK \setlength\captionindent{\wd\@tempboxa} \divide\captionindent by 2 \parbox[t]{\hsize}{\normalsize %!HAK \unhbox\@tempboxa#2} \else \hbox to\hsize{\small\hfil\box\@tempboxa\hfil} \fi \exclude{ %!HAK \begin{center}{\small #1}\\{\small\sc #2}\end{center} \vskip 8pt} %!HAK \fi} \newcounter{figure} \def\thefigure{\@arabic\c@figure} \def\fps@figure{tbp} \def\ftype@figure{1} \def\ext@figure{lof} \def\fnum@figure{Figure~\thefigure} %!HAK \def\figure{\@float{figure}} \let\endfigure\end@float \@namedef{figure*}{\@dblfloat{figure}} \@namedef{endfigure*}{\end@dblfloat} \newcounter{table} \def\thetable{\@arabic\c@table} %!HAK \def\fps@table{tbp} \def\ftype@table{2} \def\ext@table{lot} \def\fnum@table{Table~\thetable} %!HAK \def\table{\@float{table}} \let\endtable\end@float \@namedef{table*}{\@dblfloat{table}} \@namedef{endtable*}{\end@dblfloat} \if@twoside \def\ps@headings{ \def\@oddhead{\hbox{}\scriptsize\rightmark \hfil \thepage} \def\@evenhead{\scriptsize\thepage \hfil \leftmark\hbox{}} \if@draftversion \def\@oddfoot{\scriptsize\@date\hfil DRAFT} \def\@evenfoot{\scriptsize DRAFT\hfil\@date} \else \def\@oddfoot{}\def\@evenfoot{} \fi} \else \def\ps@headings{ %\def\@oddhead{\hbox{}\scriptsize\leftmark \hfil \thepage} !HAK \def\@oddhead{} \def\@evenhead{} \if@draftversion \def\@oddfoot{\scriptsize \@date \hfil DRAFT} \else \def\@oddfoot{} \fi \def\@evenfoot{}} \fi \def\ps@titlepagestyle{ %\def\@oddhead{\hbox{}\scriptsize\leftmark \hfil \thepage} !HAK \def\@oddhead{} %!HAK %\def\@evenhead{\scriptsize\thepage \hfil \leftmark\hbox{}} !HAK \def\@evenhead{} %!HAK \if@draftversion \def\@oddfoot{\scriptsize \@date\hfil DRAFT} \def\@evenfoot{\scriptsize DRAFT\hfil \@date} \else \def\@oddfoot{}\def\@evenfoot{} \fi} \def\rightmark{}\def\leftmark{} %% Defines the command for putting the header. footernote{TEXT} is the same %% as markboth{TEXT}{TEXT}. Here for compatibility with other style files. \def\markboth#1#2{\def\leftmark{\uppercase{#1}}\def\rightmark{\uppercase{#2}}} \def\footernote#1{\markboth{#1}{#1}} \def\today{\ifcase\month\or January\or February\or March\or April\or May\or June\or July\or August\or September\or October\or November\or December\fi \space\number\day, \number\year} %% BIBLIOGRAPHY % %% separate citations with "], [" \exclude{ %!HAK \def\@citex[#1]#2{\if@filesw\immediate\write\@auxout{\string\citation{#2}}\fi \def\@citea{}\@cite{\@for\@citeb:=#2\do {\@citea\def\@citea{], [}\@ifundefined {b@\@citeb}{{\bf ?}\@warning {Citation `\@citeb' on page \thepage \space undefined}}% {\csname b@\@citeb\endcsname}}}{#1}} }%endexclude %!HAK \def\@cite#1#2{[{#1\if@tempswa, #2\fi}]} %% Allow short (name-less) citations, when used in conjunction with a %% bibliography style that creates labels like \citename{, } \let\@internalcite\cite \def\cite{\def\citename##1{##1}\@internalcite} \def\shortcite{\def\citename##1{}\@internalcite} \def\@biblabel#1{\def\citename##1{##1}[#1]\hfill} \def\thebibliography#1{\section*{References}\fontsize{9}{11}\selectfont\list %!HAK {[\arabic{enumi}]}{\settowidth\labelwidth{[#1]}\leftmargin\labelwidth \advance\leftmargin\labelsep \itemsep 0pt plus .5pt \usecounter{enumi}} \def\newblock{\hskip .11em plus .33em minus .07em} \sloppy\clubpenalty4000\widowpenalty4000 \sfcode`\.=1000\relax } %!HAK \let\endthebibliography=\endlist %% appendix command for one single appendix \def\appendix{\par \setcounter{section}{0}\setcounter{subsection}{0} \def\thesection{\Alph{section}} \section*{Appendix} } %% appendices command for multiple appendicies \def\appendices{\par \setcounter{section}{0}\setcounter{subsection}{0} \def\thesection{\Alph{section}} \section*{Appendices} } \def\maketitle{\par \begingroup \def\thefootnote{} % the \thanks{} mark type is empty \if@twocolumn \if@technote \newpage\global\@topnum\z@ \@maketitle \else\twocolumn[\@maketitle]\fi \else\newpage\global\@topnum\z@ \@maketitle \fi \thispagestyle{titlepagestyle}\@thanks \endgroup \setcounter{footnote}{0}\let\maketitle\relax\let\@maketitle\relax \gdef\@thanks{}\gdef\@author{}\gdef\@title{}\let\thanks\relax \if@draftversion \vfil\mbox{}\newpage\fi } \def\@maketitle{\newpage\if@draftversion\mbox{}\vfil\fi\begin{center} \if@technote {\bf\@title\par}\vskip 1.3em{\lineskip .5em\@author\par} \else \vskip2.6em{\Large\bf\@title\par}\vskip16pt % GBM \if@draftversion\vfil\fi% {\lineskip.5em\large\@author\par} \fi \end{center}\par\vskip 1.4em} \def\abstract{% \if@twocolumn %!HAK \fontsize{11}{11}\selectfont \centerline{\bf Abstract }\vspace{1em}\normalsize\it %!HAK \else \begin{center}\vspace{-0.8em}\small\bf Abstract\end{center}\quotation\small \fi} \def\endabstract{\vspace{0.6em}\par\if@twocolumn\else\endquotation\fi \normalsize\rm} \def\keywords{\vspace{-.3em} \if@twocolumn \small\it Keywords\/\bf---$\!$% \else \begin{center}\small\bf Keywords\end{center}\quotation\small \fi} \def\endkeywords{\vspace{0.6em}\par\if@twocolumn\else\endquotation\fi \normalsize\rm} \exclude{ %!HAK %% FIX numbering of sections. \gdef\@punct{.\ \ } % Punctuation after run-in section heading \def\@sect#1#2#3#4#5#6[#7]#8{% \ifnum #2>\c@secnumdepth \def\@svsec{} \else \refstepcounter{#1}\edef\@svsec{% \ifnum #2=1\Roman{#1}.\fi\ifnum #2=2\Alph{#1}.\fi \ifnum #2>2{\csname the#1dis\endcsname}\if@technote.\fi\fi \hskip .5em} \fi \@tempskipa #5\relax \ifdim \@tempskipa>\z@ \begingroup #6\relax \@hangfrom{\hskip #3\relax\@svsec}{\interlinepenalty \@M #8\par} \endgroup \csname #1mark\endcsname{#7} \addcontentsline{toc}{#1}{\ifnum #2>\c@secnumdepth\else \protect\numberline{\csname the#1\endcsname}\fi#7} \else \def\@svsechd{#6\hskip #3\@svsec #8\@punct\csname #1mark\endcsname{#7} \addcontentsline{toc}{#1}{\ifnum #2>\c@secnumdepth \else \protect\numberline{\csname the#1\endcsname}\fi#7}} \fi \@xsect{#5}} \def\@ssect#1#2#3#4#5{\@tempskipa #3\relax \ifdim \@tempskipa>\z@ \begingroup #4\@hangfrom{\hskip #1}{\interlinepenalty \@M #5\par}\endgroup \else \def\@svsechd{#4\hskip #1\relax #5\@punct}\fi \@xsect{#3}} } %endexclude %% SECTIONS %% \def\section{\@startsection {section}{1}{\z@}{1.0em % GBM plus .5ex minus .2ex}{1.0em plus .2ex}{\large\bf}} %!HAK \def\subsection{\@startsection{subsection}{2}{\z@}{1.0em % GBM plus .5ex minus .2ex}{1.0em plus .2ex}{\large\bf}} %!HAK \def\subsubsection{\@startsection{subsubsection}{3}{\z@}{1.0em % GBM plus .5ex minus .2ex}{1.0em plus .2ex}{\large\bf}} % GBM \if@technote \def\subsubsection{\@startsection{subsubsection}{3}{\z@}{2.0ex plus .5ex minus .1ex}{0pt}{\it}} \else \def\paragraph{\@startsection{paragraph}{4}{\z@}{1.0ex plus .5ex minus .2ex}{0ex}{\rm}} \fi %% ENVIRONEMTS \def\QED{\mbox{\rule[0pt]{1.5ex}{1.5ex}}} \def\proof{\noindent\hspace{2em}{\it Proof: }} \def\endproof{\hspace*{\fill}~\QED\par\endtrivlist\unskip} \def\@begintheorem#1#2{\tmpitemindent\itemindent\topsep 0pt\rm\trivlist \item[\hskip \labelsep{\indent\it #1\ #2:}]\itemindent\tmpitemindent} \def\@opargbegintheorem#1#2#3{\tmpitemindent\itemindent\topsep 0pt\rm \trivlist \item[\hskip\labelsep{\indent\it #1\ #2\ \rm(#3)}]\itemindent\tmpitemindent} \def\@endtheorem{\endtrivlist\unskip} %% sets up default PAGESTYLE %\ps@headings \pagenumbering{arabic} %!HAK \pagestyle{empty} %!HAK \if@twoside\else\raggedbottom\fi \if@tmptwocolumn \twocolumn \sloppy \flushbottom \fi \if@draftversion \def\baselinestretch{1.5}\fi %% Definition for Big letter at the beginning of a paragraph %% \def\PARstart#1#2{\begingroup\def\par{\endgraf\endgroup\lineskiplimit=0pt} \setbox2=\hbox{\uppercase{#2} }\newdimen\tmpht \tmpht \ht2 \advance\tmpht by \baselineskip\font\hhuge=cmr10 at \tmpht \setbox1=\hbox{{\hhuge #1}} \count7=\tmpht \count8=\ht1\divide\count8 by 1000 \divide\count7 by\count8 \tmpht=.001\tmpht\multiply\tmpht by \count7\font\hhuge=cmr10 at \tmpht \setbox1=\hbox{{\hhuge #1}} \noindent \hangindent1.05\wd1 \hangafter=-2 {\hskip-\hangindent \lower1\ht1\hbox{\raise1.0\ht2\copy1}% \kern-0\wd1}\copy2\lineskiplimit=-1000pt} \if@technote\def\PARstart#1#2{#1#2}\fi % if technical note, disable it \if@draftversion\def\PARstart#1#2{#1#2}\fi % if draft, disable it %% Allows to enter BIOGRAPHY leaving place for picture (adapts to font size) %% \newenvironment{biography}[1]{% \footnotesize\unitlength 1mm\bigskip\bigskip\bigskip\parskip=0pt\par% \rule{0pt}{39mm}\vspace{-39mm}\par% garantees correct page breaking \noindent\setbox0\hbox{\framebox(25,32){}}% box containing the frame \ht0=37mm\count10=\ht0\divide\count10 by\baselineskip% calculates lines \global\hangindent29mm\global\hangafter-\count10% \hskip-28.5mm\setbox0\hbox to 28.5mm {\raise-30.5mm\box0\hss}% \dp0=0mm\ht0=0mm\box0\noindent\bf#1\rm}{ \par\rm\normalsize} \newenvironment{correspondence}{ \fontsize{9}{11}\selectfont \setlength{\parindent}{0pt} \setlength{\parskip}{5pt plus 2pt minus 1pt}\vspace{2em} Address for correspondence: \par }{\normalsize} % Set parameters for PDF output if needed (GBM) \ifpdf \pdfpagewidth=8.5truein \pdfpageheight=11truein \pdfhorigin=1truein \pdfvorigin=1truein \pdfinfo{/Creator (CinC-2013)} \fi \endinput