sustainability report for solidwork project

SolidWorks Sustainability

Ethical stuff

Slides courtesy of SolidWorks except where added by Dr. Leigh

Dr. Leigh says:

Problem with “throw away” society: Some products seem to actually be designed for failure. Companies depend on people returning to purchase more products.

Many companies are forced to be sustainable: Airline and automotive industries and the clean air act.

Sustainable vs. Green vs. Renewable vs. LCA (Leigh)

Sustainable Design: Design now without compromising the future.

May include renewable energy

Green Design: Does not harm humans nor the planet (pollution) Renewable energy: Energy that renews itself in a relative short time

Wind Tidal Solar Biomass

Welcome to the Anthropocene

Anthropocene = Age of Humans It is estimated that to avoid serious climate problems, green house gas (GHG) emissions would need to be reduced by 70% from 2000 levels by the year 2100. World’s economy will continue to expand. Has expanded and westernized since the end of the cold war. Population will continue to grow. (~80% in undeveloped countries).

Anthropocene

If per capita energy consumption and the proportions of energy from fossil fuel, nuclear, and renewables were to remain the same, world energy consumption in 2050 would be nearly 17 Gtoe. To achieve 30% carbon emission reduction by 2050, 6.9 Gtoe of fossil fuels would need to be replaced by nuclear or renewable sources.

Equivalent to 2300 GW nuclear power plants over 50 yrs Or biomass feedstocks equivalent to the land mass of India, Argentina, and Austrailia combined!

Sustainable design

Treat problem as a “system” and not as an “end of pipe” problem. This means future engineers must be made aware of three “pillars of sustainability:”

Environment Economics Society

Three pillars of sustainability

Environmental Growth without harming the planet. Economic: Sustainability of the marketplace. Social: Human connection.

But you cannot please everybody!

In a world view no one agrees You must balance the three pillars with technological constraints Create boundaries of where you want to be and what constraints you have

What is Sustainable Engineering?

Sustainable engineering is the integration of social, environmental, and economic conditions into a product or process Soon all design will be Sustainable Design SolidWorks Sustainability allows students to be environmentally conscious about their designs Successful products are developed by integrating Life Cycle Assessment (LCA) directly into engineering design process

Life Cycle Assessment - LCA

A method to quantitatively assess the environmental impact of a product throughout its entire lifecycle, from the procurement of the raw materials, through the production, distribution, use, disposal and recycling of that product.

LCA – Life Cycle Assessment Raw Material Extraction

Planting, growing, and harvesting of trees Mining of raw ore (example: bauxite) Drilling and pumping of oil

Material Processing - The processing of raw materials into engineered materials Oil into Plastic Iron into Steel Bauxite into Aluminum

Part Manufacturing - Processing of material into finished parts Injection molding Milling and Turning Casting Stamping

Assembly – Assemble all of the finished parts to create the final product Product Use – End consumer uses product for intended lifespan of product End of Life – Once the product reaches the end of its useful life, how is it disposed of

Landfill Recycled Incinerated

Life Cycle Assessment Key Elements

Identify and quantify the environmental loads involved

the energy and raw materials consumed the emissions and wastes generated

Evaluate the potential environmental impacts of these loads Assess the options available for reducing these environmental impacts

Environmental Impact Factors

Carbon Footprint Total Energy

Water Eutrophication Air Acidification

What is Carbon Footprint?

Carbon Dioxide CO2 and other gasses which result from the burning of fossil fuels accumulate in the atmosphere which in turn increases the earth’s average temperature in kilograms (kg). Carbon footprint acts as a proxy for the larger impact factor referred to as Global Warming Potential (GWP). Global Warming is responsible for the loss of glaciers, extinction of species, more extreme weather, and other environmental problems.

What is Total Energy Consumed?

Measure of the non-renewable energy sources associated with the part’s lifecycle in mega joules (MJ). Impact includes:

upstream energy required to obtain and process these fuels embodied energy of materials which would be released if burned electricity or fuels used during the product’s lifecycle Transportation?

Efficiencies in energy conversion (e.g. power, heat, steam) are taken into account.

What is Air Acidification?

Sulfur Dioxide SO2, Nitrous Oxides NOx and other acidic emissions to air that result in acid rain. Makes the land and water toxic for plants and aquatic life. Slowly dissolves manmade building materials such as concrete. Measured in units of kilograms Sulfur Dioxide equivalent (SO2e)

What is Water Eutrophication?

Over abundance of nutrients added to a water ecosystem. Nitrogen (N) and Phosphorous (PO4) from waste water and agricultural fertilizers cause an overabundance of algae to bloom, which depletes the water of oxygen and results in the death of plant and animal life. Measured in kilograms Phosphate equivalent (PO4e).

References

Underlying LCA Technology: PE International

20 years of LCA experience LCA international database GaBi 4 - leading software application for product sustainability www.pe-international.com

International LCA Standards Environmental Management Life Cycle Assessment Principles and Framework ISO 14040/44 www.iso.org

US EPA LCA Resources http://www.epa.gov/nrmrl/lcaccess/

Goal & Scope

Inventory Analysis

Impact Assessment

In te

rp re

ta tio

n

LCA Framework ISO 14044

Why SolidWorks Sustainability?

Soon all design will be Sustainable Design

More consumers want “greener” products New and unfamiliar challenge for businesses Sustainable design is a strategy for success SolidWorks Sustainability

Easy to use and to understand Reduces the environmental impact of product designs Communicates effectively through reports and graphic display SolidWorks SustainabilityXpress1 is available to EVERY SolidWorks user at no cost

Why SolidWorks Sustainability in the classroom?

Available on SolidWorks Labs for SolidWorks 2009 http://labs.solidworks.com

Process Set

Baseline

Modify Inputs

Modify Design

Find Similar

Materials

SolidWorks Sustainability Methodology

Input

Material

Manufacturing Process

Manufacturing Region

Transportation & Use

Output

Carbon

Energy

Air

Water

Dashboard

Report

Input Material Class and Material Name

Material Class and Name Hierarchy

Material Class Material Name

Material Class: Polymers (plastics)

Steel Plastics (Polymers)

ABS PC Acrylonitrile Butadiene Styrene Polycarbonate (white water pipe)

Iron Other Metals

Acrylic

Aluminum Alloys

Other non- metals

Delrin® 2700 NC010

Polyoxymethylene (POM, polyacetal or polyformaldehyde) mfg by Dupont

Copper Alloys

Generic Glass Fibers

Nylon 101

Titanium Alloys

Carbon Fibers

PE High Density

Polyethylene

Zinc Alloys Silicons PVC Rigid Polyvinyl Chloride (grey water pipe)

Other Alloys

Woods And many more

Input Manufacturing Process

Available manufacturing depends on material class

Class: Aluminum Alloys

Class: Plastics

M an

uf ac

tu ri

ng P

ro ce

ss

Die Casted Sand Casted

M an

uf ac

tu ri

ng P

ro ce

ss

Injection Molded

Extrusion Stamped/ Formed Sheet Metal

Extrusion

Forged Machined Sand Casted

Milled Turned

Input Manufacturing Region

Each region produces energy by different method combinations. Impact of a kWh is different for each region. Example methods include:

Fossil Fuels Nuclear Hydro-electric

Determines the resources consumed by manufacturing processes in that region Region Choices

Asia Europe North America Japan

Input Transportation and Use Region

Determines the energy sources consumed during the product’s use phase (if applicable) and the destination for the product at its end- of-life.

Asia Europe North America Japan

Estimates the environmental impacts associated with transporting the product from its manufacturing location to its use location.

SolidWorks Calculates Environmental Impact

Parameters Carbon Footprint Air Acidification Water Eutrophication Energy Consumed

Factor Percentage Material Manufacturing Use Regions End of Life

Set Baseline

Find Similar Materials based on Material Properties

Thermal Expansion Specific Heat Density Elastic Modulus Shear Modulus Thermal Conductivity Poisson’s Ratio Tensile Strength Yield Strength

Definitions of Material Properties

Thermal Expansion - the change in length per unit length per one degree change in temperature (change in normal strain per unit temperature) (K) Specific Heat - quantity of heat needed to raise the temperature of a unit mass of the material by one degree of temperature. (J/kg K) Density - Mass per unit volume. (kg/m3 )

Elastic Modulus (Young’s Modulus) - ratio between the stress and the associated strain in a specified direction (N/m2)

Shear Modulus (Modulus of Rigidity) - the ratio between the shearing stress in a plane divided by the associated shearing strain (N/m2) Thermal Conductivity - rate of heat transfer through a unit thickness of the material per unit temperature difference. (W/m K) Poisson’s Ratio - ratio between the contraction (traverse strain), normal to the applied load to the extension (axial strain), in the direction of the applied load. Poisson’s ratio is a dimensionless quantity. Tensile Strength –the maximum amount of tensile stress that a material can be subjected to before failure (N/m2) Yield Strength – Stress at which the material becomes permanently deformed (N/m2)

Sustainable Report

SolidWorks Sustainability - Online Calculator

Converts environmental impacts into human scale parameters Example: Carbon Footprint converted into miles driven in a car

Why SolidWorks Sustainability in the classroom?

Students need to learn, understand, improve, and communicate the environmental impact of their design Educators can provide insights on how choices in material and manufacturing processes affect the environment. Instruction combines design and technology with the social, environmental, and economic conditions

THANK YOU