Implementation and Report - Individual

CW2: individual tasks

Page 1 of 1

7COM1081 Software Development Exercise

Productive Tech 4 Work System Project: CW2 Individual Tasks

This document gives details about the tasks you need to complete individually (NOT with your team).

Please see the separate ‘team tasks’ document for details about the team element of this assessment.

The tasks are described below in part 1 with the key summary against mark weightings listed as User

Acceptance Tests (UATs) in part 2.

1. Individual Tasks

In around 750 words, critically reflect on your experience of project and team management, based on

the work you carry out for this assessment in a team. Note: this is an independent piece of work that

you must complete on your own, despite references in your discussion to tasks you did with others.

In your reflection, include discussions of all of the following:

i. Reflection on technical knowledge gained

Reflect on what you learned from this project. Which skills did you find the most beneficial/

interesting/challenging and why, e.g. data analysis, user interface design, coding, etc.

ii. Reflection of project against software process model(s) characteristics

Consider ways that Agile and/or Waterfall carry out design/implementation/testing and

reflect with 1-2 examples of how your team may have adhered to these ways of working or

those you did not adopt but feel may have been beneficial based on your experience. E.g. an

Agile characteristic is the potential for Pair Programming during implementation.

iii. Reflection of team roles

Reflect on what YOUR role was in the team. Discuss the tasks you carried out with 1-2

examples of how you worked with others to complete tasks, challenges faced, and whether

there were any changes to planned roles against reality.

iv. Reflections for future projects: lessons learned

Summarise your experience with key takeaways. Consider 1-2 examples of what you have

learned and how you might approach project/team management again in future projects.

2. User Acceptance Tests (UATs) – Individual Tasks

Final (raw) total out of 100 will be scaled to be worth 30% for the module overall. For example, a raw total of 60

out of 100 means accumulating 18% out of the possible 30% for the module overall (calculation: 60 x 0.30 = 18).

1 Individual reflection on project and team management Mark

a) Reflection of technical knowledge /25

b) Reflection against software process model(s) /25

c) Reflection of team roles /25

d) Reflections for future projects /25

FINAL TOTAL /100

2020-21