Android Studio project

Mobile App Final Project

Goal: Create a mobile App for Sheave Measurement.

To create a mobile app the works in conjunction with sheave gauges to accurately measure and record sheave wear. The app should include the activities described in the next two pages.

Notes: 1. You need to re-design the interface so it can fit better for mobile apps. 2. You need to add a main activity in order to go to the Basic Inspection Report Interface

activity and List View of Inspection Reports activity.

Inch mmInspection Date: March, 24, 2018 GPS: 49.343300 / -123.190377

Inspection Site: Pacific Cranes

Inspector: John Brown Phone: 555-321-6543

E-Mail: [email protected]

Notes: Needs to be re-inspected before June 2018

Inspection Type: Single Sheave • Sheave Block Wire Rope Block Model: B42-F400 Serial Number: 070788

No. of Sheaves: 6 Outside Sheave Diam.: 42" Nominal Rope Size: 1 3/8"

Notes: All sheaves rotated freely, MPI performed by 3rd party Clevis and primary load path. Grooves all OK, no wear apparent

SAVE CLEAR

Activity I Basic Inspection Report Interface

App users should be able to enter sheave measurement data here. You can separate this activity into more activities if it works better.

Mobile App Sheave Gauge Results

Inspection Site: Pacifi c Cranes Sheave Inspected: TX900 Crane / Low er Sheave

Inch mmWire Rope Size: Date/Time: GPS:

2.500 March, 24, 2018 / 17:35:16 49.343300 / -123.190377

Notes: Scoring detected on sheave.

Inspection Site: Pacifi c Cranes Sheave Inspected: TX900 Crane / Low er Sheave

Inch mmWire Rope Size: Date/Time: GPS:

2.375 March, 24, 2018 / 17:42:12 49.343300 / -123.190377

Notes: Below spec needs to be replaced.

Activity II

List View of Inspection Reports App users should be able to see all the previous saved reports in this activity.

The reports are shown in a listView.