Network Architecture
Abdulmalek
Assignment2.pdf
ITNE1001 Network Architecture
Assignment 2
March 2021
ITNE1001 Network Architecture
Copyright © 2020 VIT, All Rights Reserved.
Due Date: Session 12 Weightage: 25% Group Assignment
The purpose of assignment is to assess students on the following Learning
Outcomes:
LO 1 Explain key features of network architecture and purpose of network technologies LO 2 Analyse physical layer for networking, common protocols and multimedia communications
LO 3 Use appropriate network tools and techniques LO 4 Analyse network traffic network security issues LO 5 Apply methods and tools for the configuration, maintenance and troubleshooting of network devices LO 6 Use problem solving techniques to recommend basic network management solutions LO 7 Model the management of a small office network with basic routers and switches
Assignment Description
You are a Network and security engineer for the XYZ Consulting Corporation, which is a
leading network designer and security provider for the small -scale offices. As the Network
and security engineer you are required to perform the following tasks.
Task 1: Propose a network design for small scale office (Ex: Business type, departments,
building plan). You are free to assume the name of the office and number of staffs
➢ Purpose of the Project
➢ Network overview (ex: connecting PCs, subnetworks, servers or wi-fi networks) • Explain briefly about the device used.
➢ Requirements of the project including network diagram
• Draw and explain the proposed network diagram • Design a network using packet tracer. Configure routers, switches and end
devices you have used. Test your network by pinging end devices across different departments.
➢ What are the common attacks plaguing your network? How to prevent from attacking your network?
➢ Critically analyse possible security issues in your network and suggest some prevention
techniques.
Task 2: Use Wireshark to Capture, Filter and Inspect Packets
➢ Install Wireshark and start a sample capture using your wireless interface. Save your
capture file on the desktop with name_studentID.pcap (Example: jack_451245.pcap),
and close Wireshark. Provide a screenshot in your report. (After downloading and installing Wireshark, you can launch it and double-click the name of a network interface
under Capture to start capturing packets on that interface.
How to Use Wireshark to Capture, Filter and Inspect Packets: https://www.howtogeek.com/104278/how-to- use- wireshark-to-capture-filter-and-inspect-packets/)
ITNE1001 Network Architecture
Copyright © 2020 VIT, All Rights Reserved.
➢ Open your name_studentID.pcap capture file in Wireshark and check how many
packets you captured in total?
➢ Which pane displays information about packet details and explain what information’s
are available?
➢ Which pane displays information in the HEX and ASCII form for each packet you've
captured? Explain
Submission Guidelines:
The report should have a consistent, professional, and well-organized appearance.
1. This assessment item requires you to work in a group of 4 students.
2. The word limit of the report is 2500 words.
3. Your report should include the following:
➢ The cover page must identify all group member details, including student names and the
ID numbers, course details, and the assignment details.
➢ The assignment must use 12-point font size and at least single line spacing with
appropriate section headings.
➢ In-text referencing in IEEE style must be cited in the text of the report and listed
appropriately at the end in a reference list.
4. The report must be submitted in soft (electronic) copy as a Microsoft Word document on the
LMS in Turnitin Dropbox. Assignments submitted on the LMS will only be accepted.
5. Late penalty applies on late submission, 10% per day would be deducted.
6. The assignments will go through Turnitin and plagiarism penalty will be applied.
Marking Guide: 100 Marks
Task Description Marks
Network design for small scaled office
Outline a brief introduction about your project 10
Network overview should provide details about the used devices (ex: connecting PCs, subnetworks, servers or wi-fi networks) used and their importance.
10
Requirements of the project includes network diagram and justification of the approach and the concept.
20
Configure routers, switches and end devices in packet tracer. Test your network by pinging end devices from two different departments.
20
Critically analyse possible security issues in your network and suggest some prevention techniques.
10
Use Wireshark to Capture, Filter and Inspect Packets
Install and launch Wireshark. Capture and analyse packet for wireless interface.
10
Which pane displays information about packet details and explain what information’s are available.
5
Which pane displays information in the HEX and ASCII form for each packet you've captured? Explain
5
Report Layout The report style, language and structure should be appropriate. 5
References Follow the IEEE style 5
Total 100
