write the Procedure

profilejun jaffer
42-0166-00-02-EXPEquilibriumandLeChatliersPrinciple.pdf

Equilibrium and Le Châtelier’s Principle Hands-On Labs, Inc. Version 42-0166-00-02

Review the safety materials and wear goggles when working with chemicals. Read the entire exercise before you begin. Take time to organize the materials you will need and set aside a safe work space in which to complete the exercise.

Experiment Summary:

In this experiment, you will describe the components of a reaction at chemical equilibrium and use Le Châtelier’s principle to predict the direction a chemical system will shift upon changes in concentration, temperature, and pressure. You will perform equilibrium reactions and test Le Châtelier’s principle by manipulating concentration and temperature of the reactions.

EXPERIMENT

© Hands-On Labs, Inc. www.HOLscience.com 1

Learning Objectives Upon completion of this laboratory, you will be able to:

● Define chemical equilibrium and chemical system.

● Define equilibrium constant and reaction quotient.

● Explain how changes in temperature, pressure, and concentration affect the chemical system of a reaction.

● State Le Châtelier’s Principle.

● Perform chemical equilibrium reactions and manipulate chemical systems through concentration and temperature.

● Perform calculations to determine the equilibrium constant (K) and reaction quotient (Q) of reactions.

● Apply Le Châtelier’s principle to predict changes and explain observed changes in a chemical system.

Time Allocation: 2.5 hours

www.HOLscience.com 2 ©Hands-On Labs, Inc.

Experiment Equilibrium and Le Châtelier’s Principle

Materials Student Supplied Materials

Quantity Item Description 1 Dish soap 1 Hot water bath (hot water, cup) 1 Ice bath (ice, water, cup) 1 Pair of scissors, 4 in 1 Roll of paper towels 1 Source of tap water 1 Tape: clear, duct, or masking

HOL Supplied Materials

Quantity Item Description 2 Pairs of gloves 1 Pair of safety goggles 1 Test tube cleaning brush 1 Well plate – 24 1 Experiment Bag: Equilibrium and Le Châtelier’s Principle:

1 - Potassium chromate (K2CrO4), 1 M, 2 mL in pipet 1 - Potassium ferrocyanide (K4Fe(CN)6), 0.2 M, 2 mL in pipet 1 - Iron(III) nitrate (Fe(NO3)3), 0.1 M, 2 mL in pipet 1 - Hydrochloric acid (HCl), 2 M, 10 mL in dropper bottle 1 - Sodium hydroxide (NaOH), 2 M, 10 mL in dropper bottle 3 - Short, thin-stem pipets

Note: To fully and accurately complete all lab exercises, you will need access to:

1. A computer to upload digital camera images.

2. Basic photo editing software, such as Microsoft Word® or PowerPoint®, to add labels, leader lines, or text to digital photos.

3. Subject-specific textbook or appropriate reference resources from lecture content or other suggested resources.

Note: The packaging and/or materials in this LabPaq kit may differ slightly from that which is listed above. For an exact listing of materials, refer to the Contents List included in your LabPaq kit.

www.HOLscience.com 3 ©Hands-On Labs, Inc.

Experiment Equilibrium and Le Châtelier’s Principle

Background Equilibrium

Chemical reactions may go to completion, that is, the reactants produce products until the one of the reactants (the limiting reactant) is used up. However, most reactions are reversible and products react to reform the reactants. The reactants, products, and energy associated with a chemical reaction are referred to as a chemical system. The reaction reaches a state of chemical equilibrium when the rate of the forward reaction is the same as the rate of the reverse reaction, which means that the concentrations of the reactants and products are constant. The term dynamic equilibrium is used to emphasize that the reactions are still occurring, even though the reaction appears to have stopped changing. See Figure 1.

Figure 1. (Top) This reaction proceeds to completion, as noted by the pink arrow. (Bottom) This reaction is reversible, as noted by the blue arrows which move in two directions.

The situation at equilibrium varies greatly from reaction to reaction. Some chemical reactions reach equilibrium with mainly reactants present, other reactions reach equilibrium with appreciable amounts of both reactants and products present, while still others do not reach equilibrium until mostly products are present. In addition, it makes no difference if a reaction is started with 100% reactants or with 100% products, or whether a reaction is started with 1 mole of reactants or 10 moles of products, it will reach the same equilibrium point where free energy is equal to zero. See Figure 2.

Figure 2. Reaction at chemical equilibrium. In this reaction, the reactants (9 green balls and 9 pink balls) react to form product (9 purple balls). As the reaction is at chemical equilibrium, the reaction does not go to 100% completion. Rather, at chemical equilibrium, there is a mixture of

both products and reactants: 8 purple balls, 1 green ball, and 1 pink ball.

www.HOLscience.com 4 ©Hands-On Labs, Inc.

Experiment Equilibrium and Le Châtelier’s Principle

Equilibrium Constant

When a reaction is at equilibrium (and at a specific temperature), the concentrations of reactants and product remain constant, which makes it possible to define an equilibrium constant, K. (See below) The equilibrium constant, K, is equal to the molar concentrations of the products, each raised to a power equal to the coefficient in the balanced chemical equation, divided by the molar concentrations of the reactants, each raised to a power equal to the coefficient in the balanced chemical equation.

If the products concentrations are much higher than the reactant concentration at equilibrium, then K will be a large number. K values close to 1 mean that both reactants and products are present in similar amounts at equilibrium. Small K values (less than 1) indicate that reactant concentrations are higher than product concentrations at equilibrium.

Generally, if the value of K is greater than 1, we say that the reaction favors the products and if the value of K is less than 1, the reaction favors the reactants. The larger the value of K, the more the reaction favors the products. For example, consider the sample reaction and equilibrium constant calculations below:

The concentrations of the reactants and products at equilibrium are: [N2] = 1.4 x 10 -3 M, [Cl2] =

4.3 x 10-4 M, and [NCl3] = 1.9 x 10 -1 M. The equilibrium constant is calculated as shown below:

As the value of K is much larger than 1, the reaction favors the formation of product. See Figure 3.

www.HOLscience.com 5 ©Hands-On Labs, Inc.

Experiment Equilibrium and Le Châtelier’s Principle

Figure 3. Relationship between K and the formation of products vs. reactants.

Le Châtelier’s Principle

Once a reaction is at equilibrium, any change in concentration (or pressure of a gaseous reactant or product) will disrupt the chemical system. The reaction will spontaneously return to equilibrium, but at a slightly different position than the original one. For example, adding more reactant to a system at equilibrium will speed up the forward reaction and produce more products. The resulting increase in product concentration will cause the reverse reaction to speed up also until it equals the forward rate, re-establishing the equilibrium at a higher product concentration than before. We say that this reaction “shifted to the right” to again achieve equilibrium. Adding product to a reaction at equilibrium results in the opposite situation. Le Châtelier’s principle states that a chemical system will adjust in response to in order change to return to equilibrium. See Table 1.

Table 1. Chemical system responses to change.

Type of Change Chemical System Shift

(Right shifts toward product. Left shifts toward reactant.)

Increase concentration of reactant OR

Decrease concentration of product Right

Decrease concentration of reactant OR

Increase concentration of product Left

Increase temperature of an exothermic reaction Left Increase temperature of an endothermic reaction Right Decrease temperature of an exothermic reaction Right

Decrease Temperature of an endothermic reaction Left Decrease pressure (gases only) More gas molecules Increase Pressure (gases only) Less gas molecules

www.HOLscience.com 6 ©Hands-On Labs, Inc.

Experiment Equilibrium and Le Châtelier’s Principle

Reaction Quotient

The value of the equilibrium constant for a reaction varies with temperature. In a chemical system at equilibrium, if the forward reaction is exothermic, then the reverse reaction must be endothermic, and vice versa. Increases in temperature cause both reactions to speed up but will have a greater effect on the endothermic reaction. Increases in temperature are said to “favor” the endothermic process while decreases in temperature “favor” the exothermic process. See example below:

If additional heat were applied to the exothermic reaction, the system would shift to the left, reducing the overall temperature of the reaction. Likewise, if additional AB3 was added to the reaction, the system would again shift to the left to create the appropriate balance of products and reactants.

The chemical system can also be shifted toward the right upon addition of A2 or B2, as both additions would cause an increased concentration of product. Likewise, as both A2 and B2 are gaseous substances, increasing or decreasing the pressure of these two gases would cause a shift of the chemical system to re-achieve the equilibrium position.

The above examples discussed predicting how a reaction at equilibrium will respond to changes. It is also possible to predict how a newly combined mixture of reactants and products will proceed to reach equilibrium. We do this by determining the reaction quotient, Q, and comparing it to the value of the equilibrium constant. Q is calculated the same way as K, but using initial concentrations rather than equilibrium concentrations. See Table 2.

Table 2. Relationship between reaction quotient (Q) and equilibrium constant (K).

Relationship Chemical System Response Q is equal to K System remains at equilibrium

Q is greater than K The reverse reaction will predominate as the system approaches equilibrium.

Q is less than K The forward reaction will predominate as the system approaches equilibrium.

Example:

For example, examine the reaction for the synthesis of ammonia, which has a K = 6.0 x 10-2. Note that the initial concentrations are differentiated from equilibrium concentrations by the subscripted “0.”

www.HOLscience.com 7 ©Hands-On Labs, Inc.

Experiment Equilibrium and Le Châtelier’s Principle

The following concentrations of gases are placed in a container: [H2] = 1.0 x 10 -2M, [N2] 5.0 M and

[NH3] = 1 x 10 -4 M. Calculate Q to determine which reaction (forward or reverse) will proceed to

reach equilibrium.

As Q is less than K (Q = 0.0020, K = 0.060), the forward reaction will predominate as the system approaches equilibrium.

Hemoglobin is a protein in your red blood cells that

can combine with oxygen to allow your blood to carry that oxygen to cells in your body. Hemoglobin combines with oxygen in the lungs

and releases oxygen to your cells. The partial pressure of oxygen in these two

locations differs: high in the lungs, low in the cells throughout the

body.

www.HOLscience.com 8 ©Hands-On Labs, Inc.

Experiment Equilibrium and Le Châtelier’s Principle

Exercise 1: Equilibrium of Chromate and Dichromate In this exercise, you will investigate Le Châtelier’s principle on chromate-dichromate equilibrium.

Note: The potassium chromate used in this experiment is potentially toxic and contact with both skin and eyes must be avoided. Ensure that gloves and goggles are worn when working with this chemical.

1. Put on your safety goggles and gloves.

2. Set the 24-well plate on the table and use scissors to carefully snip off the tip of the potassium chromate (K2CrO4) chemical pipet. Using the well plate as a pipet holder, set the pipet upright in a well. See Figure 4.

Figure 4. Well plate with chemical pipet.

3. Place 8 drops of potassium chromate in the well directly in front of the pipet. See Figure 5.

Figure 5. Placing 8 drops of potassium chromate into a well.

www.HOLscience.com 9 ©Hands-On Labs, Inc.

Experiment Equilibrium and Le Châtelier’s Principle

In the remainder of this exercise, you will investigate the equilibrium reaction between chromate and dichromate (the potassium is a spectator ion, and does not participate in this equilibrium reaction):

4. Record the color of the chromate in the well plate in Data Table 1 of your Lab Report Assistant.

Note: The indication for which way the chemical system shifts is based on color.

5. Add four drops of hydrochloric acid (HCl) to the potassium chromate.

6. Add drops of sodium hydroxide (NaOH) to the chemical system until the color change is complete. Record the number of drops of NaOH added and the resulting color change in Data Table 1.

7. Set up a cold water bath (cup of ice mixed with cold water) and a hot water bath (cup of very hot water). See Figure 6.

Figure 6. Water baths. A. Cold water bath. B. Hot water bath. Note that the water is not boiling, but is hot enough to create steam along the side of the cup (red arrow).

www.HOLscience.com 10 ©Hands-On Labs, Inc.

Experiment Equilibrium and Le Châtelier’s Principle

8. Place 8 drops of potassium chromate into an empty well.

9. Add 4 drops of HCl to the potassium chromate in the well.

10. Use an empty, short-stem pipet to draw-up all of the potassium chromate/HCl from the well and turn the pipet over so all of the reaction is pooled at the bottom of the pipet. See Figure 7.

Figure 7. Drawing-up the K2CrO4/HCl reaction into an empty pipet.

11. Observe the color of the reaction and record in Data Table 2 of your Lab Report Assistant.

12. From the color of the reaction, determine if the reactants or products are favored. Record in Data Table 2 and explain your answer.

13. Place the reaction in the pipet into the cold water bath, submerge the liquid in the water bath, and tape the end of the pipet to the cup to keep the pipet upright. Allow the pipet to remain in the cold water bath for 2-3 minutes. See Figure 8.

Figure 8. Pipet in cold water bath.

www.HOLscience.com 11 ©Hands-On Labs, Inc.

Experiment Equilibrium and Le Châtelier’s Principle

14. After the pipet has been in the cold water bath for 2-3 minutes, remove the pipet from the cold water bath and observe the reaction, including both color and additional observations. To completely observe the color of the reaction, swirl the contents in the pipet.

15. From the color and observations of the reaction in the pipet, determine if the reactants or products were favored as the result of the cold-water bath. Record in Data Table 2 and explain your answer.

16. Place the reaction in the pipet into the hot water bath, submerge the liquid in the water bath, and tape the end of the pipet to the cup to keep the pipet upright. Allow the pipet to remain in the hot water bath for 2-3 minutes. See Figure 9.

Figure 9. Pipet in hot water bath.

17. After the pipet has been in the hot water bath for 2-3 minutes, remove the pipet from the hot water bath and observe the reaction, including both color and additional observations. To completely observe the color of the reaction, swirl the contents in the pipet.

18. From the color and observations of the reaction in the pipet, determine if the reactants or the products were favored as the result of the hot-water bath. Record in Data Table 2 and explain your answer.

19. Repeat steps 13-18 as necessary, to complete Data Table 2. You may not need to repeat the steps.

20. Place the caps on the HCl and NaOH bottles and leave the well-plate out, as they will be used

www.HOLscience.com 12 ©Hands-On Labs, Inc.

Experiment Equilibrium and Le Châtelier’s Principle

in the next exercise.

Questions A. Use your results to determine if the forward reaction in the potassium chromate/HCl reaction is

endothermic or exothermic. Explain your answer, using Table 1 to help construct your thoughts.

B. Write the equation for the equilibrium constant (K) of the reaction studied in this exercise.

Use the information below to answer Questions C, D, and E:

The equilibrium constant (K) of the reaction below is K = 6.0 x 10-2, with initial concentrations as follows: [H2] = 1.0 x 10

-2 M, [N2] = 4.0 M, and [NH3] = 1.0 x 10 -4M.

C. If the concentration of the reactant H2 was increased from 1.0 x 10 -2 M to 2.5 x 10-1M, calculate

the reaction quotient (Q) and determine which way the chemical system would shift.

D. If the concentration of the reactant H2 was decreased from 1.0 x 10 -2 M to 2.7 x 10-4M, calculate

the reaction quotient (Q) and determine which way the chemical system would shift.

E. If the concentration of the product NH3 was decreased from 1.0 x 10 -4 M to 5.6 x 10-3M, calculate

the reaction quotient (Q) and determine which way the chemical system would shift.

www.HOLscience.com 13 ©Hands-On Labs, Inc.

Experiment Equilibrium and Le Châtelier’s Principle

Exercise 2: Equilibrium of Ferrocyanide and Ferric Ferrocyanide In this exercise, you will investigate Le Châtelier’s principle on ferrocyanide and ferric ferrocyanide.

Note: Never mix cyanide containing compounds with any kind of acid, as toxic fumes will be produced. Only add cyanide compounds to bases as instructed in this exercise.

1. Put on your safety goggles and gloves.

2. Set the 24-well plate on the table and use scissors to carefully snip off the tip of the potassium ferrocyanide (K4Fe(CN6)) chemical pipet. Wipe the scissors with a damp paper towel and then carefully snip off the tip of the iron(III) nitrate (Fe(NO3)3) chemical pipet. Using the well plate as a pipet holder, set the pipets upright in a well. See Figure 10.

Figure 10. Pipets in well plate.

3. Place 8 drops of potassium ferrocyanide in an empty well of the well plate.

www.HOLscience.com 14 ©Hands-On Labs, Inc.

Experiment Equilibrium and Le Châtelier’s Principle

In the remainder of this exercise, you will investigate the equilibrium reaction between ferrocyanide and ferric ferrocyanide (also called iron(III) ferrocyanide):

4. Record the color of the potassium ferrocyanide in the well plate in Data Table 3 of your Lab Report Assistant.

Note: The indication for which way the chemical system of the reaction shifts is based on color.

5. Add 1 drop of iron(III) nitrate to the potassium ferrocyanide. Record the color of the ferric ferrocyanide in Data Table 3.

6. Add drops of NaOH to the reaction until the chemical system shifts, as noted by a color change. Record the number of drops of NaOH added in Data Table 3.

7. Observe the reaction after the chemical system has shifted and record observations in Data Table 3.

8. Repeat steps 3 through 7 as needed to complete Data Table 3. Note that you may not need to perform the steps additional times.

9. Clean all equipment and return to the kit for future use.

10. Dispose of used chemical pipets properly.

11. When you are finished uploading photos and data into your Lab Report Assistant, save and zip your file to send to your instructor. Refer to the appendix entitled “Saving Correctly,” and the appendix entitled “Zipping Files,” for guidance with saving the Lab Report Assistant in the correct format

Questions A. From your observations and data collected in Data Table 3, describe the direction of the

chemical system shift upon addition of NaOH.

www.HOLscience.com 15 ©Hands-On Labs, Inc.

Experiment Equilibrium and Le Châtelier’s Principle