Hygiene

profilescoobizzle
1926.100-Headprotection.OccupationalSafetyandHealthAdministration.pdf

1/24/20, 1:41 PM1926.100 - Head protection. | Occupational Safety and Health Administration

Page 1 of 2https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.100

By Standard Number / 1926.100 - Head protection.

Part Number: 1926 Part Number Title: Safety and Health Regulations for Construction Subpart: 1926 Subpart E Subpart Title: Personal Protective and Life Saving Equipment Standard Number: 1926.100 Title: Head protection. GPO Source: e-CFR

1926.100(a) Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets.

1926.100(b) Criteria for head protection.

1926.100(b)(1) The employer must provide each employee with head protection that meets the specifications contained in any of the following consensus standards:

1926.100(b)(1)(i) American National Standards Institute (ANSI) Z89.1-2009, "American National Standard for Industrial Head Protection," incorporated by reference in §1926.6;

1926.100(b)(1)(ii) American National Standards Institute (ANSI) Z89.1-2003, "American National Standard for Industrial Head Protection," incorporated by reference in §1926.6; or

1926.100(b)(1)(iii) American National Standards Institute (ANSI) Z89.1-1997, "American National Standard for Personnel Protection-Protective Headwear for Industrial Workers-Requirements," incorporated by reference in §1926.6.

1926.100(b)(2) The employer must ensure that the head protection provided for each employee exposed to high-voltage electric shock and burns also meets the specifications contained in Section 9.7 ("Electrical Insulation") of any of the consensus standards identified in paragraph (b)(1) of this section.

1926.100(b)(3) OSHA will deem any head protection device that the employer demonstrates is at least as effective as a head protection device constructed in accordance with one of the consensus standards identified in paragraph (b)(1) of this section to be in compliance with the requirements of this section.

1/24/20, 1:41 PM1926.100 - Head protection. | Occupational Safety and Health Administration

Page 2 of 2https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.100

consensus standards identified in paragraph (b)(1) of this section to be in compliance with the requirements of this section.

[77 FR 37600, June 22, 2012; 77 FR 42988, July 23, 2012]

UNITED STATES DEPARTMENT OF LABOR

Occupational Safety & Health Administration 200 Constitution Ave NW Washington, DC 20210 ! 800-321-6742 (OSHA) TTY www.OSHA.gov

FEDERAL GOVERNMENT

White House Severe Storm and Flood Recovery Assistance Diaster Recovery Assistance DisasterAssistance.gov USA.gov No Fear Act Data U.S. Office of Special Counsel

OCCUPATIONAL SAFETY & HEALTH

Frequently Asked Questions A - Z Index Freedom of Information Act - OSHA Read The OSHA Newsletter Subscribe to the OSHA Newsletter OSHA Publications Office of Inspector General