SAFETY ENGINEERING

1.    Discuss the factors that might contribute to a person tripping on a walking surface. Which of these factors do you believe can best be controlled using engineering controls? Which of the factors is the most difficult to control?

Your essay should be at least 100 words in length.

Question 2

1.      

What dimensions would you use for a booth-type hood if you wanted an exhaust rate of 1,000 cubic feet per minute and a capture rate of 100 feet per minute to capture organic vapors from a paint spray operation? Be sure to show your work. If you wanted to clean the air that you are capturing before exhausting it outside, what type of air cleaning device would you recommend and why?

Your essay should be at least 100 words in length.

Question 3

1.      

Compare and contrast the different types of tribometers. In your opinion which of the tribometers best represents the slip resistance of a surface?

Your essay should be at least 100 words in length.

4

You have a production area where ten welders are producing small parts using MIG welding on mild steel for eight hours each day. There is a general "haze" visibly present, which increases throughout the work day. What type ventilation system would you recommend for the operation? Which factors associated with the contaminant(s) produced by the welding operation would you consider in choosing the ventilation system? How would you evaluate the effectiveness of any ventilation system you installed?

Your essay should be at least 100 words in length

5     The Heat Stress Index (HSI) uses the terms O (Oxygen required), M (Metabolism), R (Radiation) C (Convection), and E (Evaporation). Compare and contrast the terms. Provide an example of a control method that you believe would be effective in controlling heat stress related to each of the terms M, R, C, and E.

Your essay should be at least 100 words in length.