Final

This item covers Modules 5-8.  Scan, handwrite answers and upload solutions.  Show all required calculations for full credit.

1.     Design a 16-Bit DAC Circuit

1.     Calculate the values for all resistors

2.     Include calculations and schematic

3.     Capture a screenshot of several input/output settings from the 16-Bit DAC Circuit

2.     For a Wien-bridge oscillator

1.     Given R = 50Kohm and C = 100nF what is the frequency of oscillation?

2.     Given a required frequency of oscillation of f = 10kHz and R = 8kohm, what should the value of C be?

3.     Calculate the signal to noise ratio given RMS Noise Voltage = 20mV and RMS Signal Voltage = 2.5V

4.     Calculate E_TotalRMS given e²_1RMS = 5V and e²_2RMS = 7V

5.     Calculate SNR(dB) given a noise specification of 680nV

6.     Calculate the noise specification given SNR(dB) = 350dB

7.     For a simulated inductor application, to yield L = 75mH, R₁ = 3kohm, and C₁ = 200uF, determine required value of R₂.

8.     For a constant current generator, with a saturation voltage = 20V and a current reference of 30mA, calculate R_Lmin.

9.     For a precision rectifier application, given E_IRMS = 5V, determine E_Opeak.

10.   For an AC to DC converter, given E_IPeak = 10V, determine E_I.