construction sequence paper

I just want you to write a one sheet of paper ( construction sequence paper). see the description of the project. its due in 3 hours.

Description 

You have been contacted by the ABC School District to design a modular unit that can be divided in two 

or more classrooms as needed. A plan view of the modular units is shown below. Each unit will have an 

overhang on both sides of the longest building dimension. Columns can only be located along the main 

perimeter. All main structural members (slab, beams, joists, columns and footings) must be of reinforced 

concrete (f’c = 4000 psi). ACI 318-11 building code requirements must be satisfied. Assume that the units 

are going to be build in San Antonio, Texas. The architect requires that between top of floor and bottom of 

ceiling the clear distance should be 12 feet. The floor slab is going to be 6-inch thick. The bearing 

capacity of the soil has been estimated to be 4500 psf. The water table is very deep. Only Gr.60 steel is 

available. The roof of the modular unit is going to have solar panels covering 100% of the area (including 

overhangs). Reinforced masonry walls will be used in the longitudinal direction.