chemistry

How to download and save your Lab Safety Contract

1. To begin you will need to download this fillable PDF to your desktop by selecting the

download button in the upper right-hand corner of your browser screen.

2. Next, open the PDF in a PDF reader (ex: Adobe acrobat, Foxit, etc.) to fill out the

contract.

*** Note: If your PDF is opening in a browser page, right-click on the file to open it with a

PDF reader. If you do not have a PDF reader installed on your computer, you can download one for free online.

3. Once you have finished filling out your Lab Safety Contract, save it and submit it

to your instructor.

®

Lab Safety Contract

eScience Labs feels confident that with the knowledge of our Safety Procedures, you will be

able to create and maintain a safe laboratory experience. With your cooperation, you will be

able to eliminate, prevent, and correct possible hazards.

Please complete the questions below and, if you comply with the safety rules, sign this contract.

If you do not comply, please note this within your contract. Note that if you do not choose to

comply, you will not be included in eScience Labs’ safety and liability coverage.

Return this safety contract to your Instructor.

Questions

1. Do you wear contact lenses?

□ YES □ NO

2. Are you colorblind?

□ YES □ NO

3. Do you have any allergies?

□ YES □ NO

If YES, list specific allergies: _________________________________

4. Do the contents of your kit match the packing list?

□ YES □ NO

If NO, contact eScience labs customer support immediately to request the missing

components.

®

Student Agreement

I, _____________________ (your name) have read and choose to comply with all of the safety

rules set forth in the Safety Procedures. By signing this contract, I realize that I must obey these

rules to ensure my own safety. I will cooperate to the fullest extent with my instructor and the

protocols in my lab kit to maintain a safe lab environment. I will also closely follow any oral

and/or written instructions additionally provided by my instructor as part of a specific activity. I

am aware that any violation of this safety contract that results in unsafe conduct in the

laboratory, or misbehaviour on my part, may result in consequences as specified by my

instructor.

____________________________________

Student Signature

____________________________________

Date

____________________________________

Course Name

®

1. Do you wear contact lenses: Off
2. Are you colorblind: Off
3. Do you have any allergies: Off
4. If YES list specific allergies:
5. Do the contents of your kit match the packing list: Off
6. Course Name:
7. Student Signature:
8. Date:
9. Student Name:

Table of Contents + Time & Materials There may be a few additional materials required to complete your lab experiments that are not included in your eScience Labs kit. Please review the procedures and plan accordingly. Note that the times listed are approximations and may differ depending on the assignments required by your instructor and/or your previous subject knowledge.

LAB 1: INTRODUCTION TO SCIENCE

Time Required: 1 hour | Additional Materials: None

• Exercise 1: Conversion

• Exercise 2: Significant Digits

• Exercise 3: Experimental Variables

LAB 2: GENERAL CHEMISTRY LAB SAFETY

Time Required: 1 hour | Additional Materials: Camera (smartphone is fine), Pen/pencil, Distilled water, Permanent marker

• Exercise 1: Mapping Laboratory Safety

• Experiment 1: Neutralization of Acids and Bases

LAB 3: CHEMICAL NOMENCLATURE

Time Required: 1 hour | Additional Materials: None

• Experiment 1: Nomenclature Practice

LAB 4: COMPOUND FORMULAS

Time Required: 3 hours | Additional Materials: Distilled water, Oven/Toaster oven, Baking pan, Timer, Hot pad/towel, Camera (smartphone is fine), Internet access, Graphing software

• Experiment 1: Determining the Chemical Formula for Copper Gluconate

LAB 5: QUALITATIVE ANALYSIS OF IONS

Time Required: 2 hours | Additional Materials: Tap water, Permanent marker, Timer, Camera (smartphone is fine), Measuring spoons

• Experiment 1: Qualitative Analysis of Reactions

LAB 6: ELECTRON CONFIGURATION

Time Required: 1 hours | Additional Materials: None

• Experiment 1: The Chemistry of Fireworks

LAB 7: CHEMICAL BONDING

Time Required: 2 hours | Additional Materials: Scissors, Permanent marker, Paper towels, Timer, Camera (smartphone is fine), 1 g Salt

• Experiment 1: Structural Models

• Experiment 2: Melting Points and Types of Bonds

LAB 8: GAS LAWS

Time Required: 2 hours | Additional Materials: Tap water, Timer, Distilled water, Camera (smartphone is fine), Cooking pot, Stove top, Rubber band, Ice, Pencil, Internet access, Graphing software

• Experiment 1: Ideal Gas Law - Finding Percent H2O2 with Yeast • Experiment 2: Charles’ Law Part 1

• Experiment 3: Charles’ Law Part 2

LAB 9: ENTHALPY AND SPECIFIC HEAT

Time Required: 3 hours | Additional Materials: Timer, Tap water, Distilled water, Cooking pot, Stove top/microwave, Paper towels, Scissors, Toothpick, Internet access, Graphing software, Camera (smartphone is fine)

• Experiment 1: Determination of Specific Heat of a Metal

• Experiment 2: Cold Packs vs. Hand Warmers

LAB 10: ACID-BASE TITRATIONS

Time Required: 2 hours | Additional Materials: Internet access, Graphing software, Camera (smartphone is fine), Distilled water, Scissors, Permanent marker

• Experiment 1: Titrations with Taco Sauce

LAB 11: GRAVIMETRIC ANALYSIS

Time Required: 2 hours (plus 1 day for observations) | Additional Materials: Camera (smartphone is fine), Distilled water, Timer, Isopropyl alcohol

• Experiment 1: Gravimetric Analysis with Calcium Chloride and Potassium Carbonate

LAB 12: MOLAR MASS AND FREEZING POINT DEPRESSION

Time Required: 1 hours | Additional Materials: Permanent marker, Distilled water, Cubed/Crushed ice, Camera (smartphone is fine)

• Experiment 1: Determining Molar Mass from Freezing Point

LAB 13: MOLAR VOLUME OF GASES

Time Required: 1 hour | Additional Materials: Distilled water, Scissors, Camera (smartphone is fine), Permanent marker

• Experiment 1: Determining Molar Volume

LAB 14: MOLAR MASS AND VAPOR DENSITY

Time Required: 1 hour | Additional Materials: Camera (smartphone is fine), Distilled water, Paper towels, Hot pad/towel, Safety pin, Rubber band

• Experiment 1: Calculating the Molar Mass of Ethanol

Scissors, Timer, 15 g Salt, Internet access, Graphing software, Camera (smartphone is fine)

• Experiment 1: Plating Copper Gluconate

• Experiment 2: Waste Disposal of Copper Gluconate

Experiment 2Cold Packs Vs. Hand-Warmers

Experiment Inventory

Materials 1/4 Contents of a Cold Pack (ammonium nitrate,

(NH4NO3)

Entire Contents of a Hand Warmer

*Graphing Software

*Computer / Internet Access

*Paper Towels

*Distilled Water

Labware 2 Calorimeters (Styrofoam™ Cups)

10 mL Graduated Cylinder

Scale

Stir Rod

Spatula

Thermometer

Weigh Boat

*Scissors

*Stopwatch / Clock Note: You must provide the materials listed in *red.

EXPERIMENT 2: COLD PACKS VS. HAND-WARMERS In this experiment, you will observe the kinetic energy of molecules by comparing the temperature changes in a calorimeter. Specifically, you will observe the temperature changes for cold packs and hand warmers. Since temperature is defined as the average kinetic energy of the molecules, changes in temperature indicate changes in energy. You will use a Styrofoam™ cup as a calorimeter to capture the energy. The lid will not be placed on the cup since ample oxygen from the air is needed for the hand warmer ingredients to react within a reasonable amount of time.

PROCEDURE

Part 1: Cold Pack

1. Put on your safety glasses and gloves (provided in your safety box).

2. Measure 10 mL of distilled water into a 10 mL graduated cylinder.

3. Turn on the scale by pressing the button labeled “0/T.”

4. Place the weigh boat on the scale and press the 0/T button a second time to zero the scale. Make sure that the units are in grams (g). If not, press the M button until the units displayed are in grams.

5. Using your scissors, cut off the top of your cold pack and weigh out 10 g of the ammonium nitrate (NH4NO3) crystals found in the inner contents of the pack.

6. Place the 10 g of the ammonium nitrate into a Styrofoam® cup. The Styrofoam® cup will be used as a calorimeter.

7. Place a thermometer and a stir rod into the calorimeter (Styrofoam® cup).

8. Pour the 10 mL of distilled water into the calorimeter containing the ammonium nitrate (NH4NO3) taken from the cold pack.

9. Immediately record the temperature and time in Table 4.

©2018, eScience Labs

10. Quickly begin stirring the contents in the calorimeter.

11. Use your stopwatch or timer to record the temperature at 30 second intervals in Table 4. You will need to stir the reaction the entire time you are recording data.

12. Collect data for at least five minutes, or until the temperature reaches its minimum and begins to rise. This should take approximately five to seven minutes.

13. Record the overall minimum temperature in the appropriate place in Table 4.

Part 2: Hand Warmer

Hint: The iron within the hand warmer mixes with the oxygen in the air and oxidizes in a process known as an oxidation reaction:

1. Wash the thermometer and dry it with paper towels. Remember to rinse it with distilled water before drying. Carefully place the thermometer in the other Styrofoam® cup.

2. Cut open the inner package of the hand warmer and quickly transfer all of its contents into the calorimeter.

3. Immediately record the initial temperature of the contents and begin timing the reaction.

Hint: Data collection should start quickly after the package is opened, because the reaction will be activated as soon as it is exposed to air.

4. Begin stirring the contents in the calorimeter with your thermometer.

5. Continue stirring, recording the temperature at thirty second intervals in Table 5. You will need to stir the reaction at a consistent rate the entire time you are recording data.

6. Set a stopwatch or timer for five minutes. Let the reaction continue for at least five minutes, or until the temperature has reached its maximum and then fallen a few degrees. This should take approximately 5 to 7 minutes.

7. Record the overall maximum temperature in the appropriate place in data Table 5.

©2018, eScience Labs

Data Sheet Experiment 2 Data Sheet

Table 4: Cold Pack Data

Time (sec) Temperature (°C)

Initial

30

60

90

120

150

180

210

240

270

300

330

360

390

420

450

Minimum Temperature(°C)

Table 5: Hand Warmer Data

Time (sec) Temperature (°C)

Initial

30

60

90

120

150

180

210

240

270

300

330

360

390

420

450

Maximum Temperature (°C)

©2018, eScience Labs