System Architecture
The Fair Dinkum Milk focuses on the reduction of energy losses in the waste heat recovery system. It is also important to focus on the importance and means of associating on changes in the waste usage and recovery. The system under development is a complicated electronic installation for regulating heat, water, and fuel injections into the boilers. This will use the heat exhaust to trap any waste heat and this can be also be used through the circulation in the heat chamber. Thus, the installation is focusing on the importance and means to ensure the development of the system aligns with the company’s desire for an improved heat recovery system.
Total cost of ownership is the acquisition of the equipment for control lagging and piping. This will also require resource for the installation of the unity and which will improve the company’s income from the management of heat loss and energy consumption. Finally, the total cost of the waste heat recovery system is $100,000. This will be the cost of total ownership of the heat recovery system.
The new system will be able to be fully automated for safety of the technician teams and during installation of the controls and piping. The scalability of the system supports system integration and this develops a foundation to help improve system performance, especially, during the control and support of the system features (Avison, & Fitzgerald, 2003). There is also information, which is also crucial about the changes in the system, such as piping and transition from one point to another.
The key controls are the measurement controls and heat sensors, which will help in the determination of the heat levels and how to regulate the water and fuel injections into the boiler. Waste captured can also be regulated through the exhaust and combustion chambers. The circulation and regulation of these features is a clear indication on the importance of meeting and transition from one level to another.
Extreme exposure to high heat levels can be detrimental to an individual and a person’s health. Hence, insulation is an ideal way and there is also the need for using warning signals from the controls on high levels of heat signals (Avison, & Fitzgerald, 2003). It is a challenge to affect the performance and ability to ensure the flow of the heat levels and how the system can respond to these conditions.
Feasibility Study
The proposed system has piping from the boiler and the injection in form of the inputs are water and fuel. Combustion can be used effectively to circulate the waste heat and this can be trapped and piped into the steam turbine, which uses energy from the boiler and generator. The system has also two energy sources the fuel and water inputs and the hot gases from the grid to ensure the system runs in operational efficiency. The hot air is mixed with the cold air and this circulation helps to reduce the heat at the combustion chamber. There is also the indication on the importance for meeting the foundation and basis for vital system heat recovery and this will help in the reduction of energy levels and combustion in the chamber. It will also increase and improve the different levels as attributed to the changes in heat and combustion in the long-term.
References
· Avison, D., & Fitzgerald, G. (2003). Information systems development: methodologies, techniques and tools. McGraw Hill.
· Göser, J., & Olthoff, C. T. (2014, July). Results of a Dynamic Liquid Cooling Garment Simulation in V-SUIT. 44th International Conference on Environmental Systems.
· Hakansson, H. (2015). Industrial Technological Development (Routledge Revivals): A Network Approach. Routledge.
Facility FacilitynoPKAddressFacility NameEngineSerialNoPKEngine nameproductionYearGeneratorSerialNoPKGenerator nameproductionYearTechnicianTechnicianIdPKTechnician nameAddressSerialNoTechnicianId
Facility
Table
Facilityno
PK
FK
Address
PK
FK
Facility Name
PK
FK
Engine
Table
SerialNo
PK
FK
Engine name
PK
FK
productionYear
PK
FK
Generator
Table
SerialNo
PK
FK
Generator name
PK
FK
productionYear
PK
FK
Technician
Table
TechnicianId
PK
FK
Technician name
PK
FK
Address
PK
FK
SerialNo
PK
FK
TechnicianId
PK
FK
M1
M2
M3
M4
M1
M2
M3
M4
M1
M2
M3
M4
Analyze Heat system NeedsTechnician Manual and DirectoryProduce the Steam Readings and ConsiderationsConsider water and Energy ReadingsConsider heat system and risk details Consider water and Energy ReadingsRegulate the Energy LevelsRegulate the CondenserConsider the safety precautionsRegulate the Fuel LevelsRegulate the CondenserRegulate the Water LevelsDetermine the steam threshold and safety levelsConsider Energy Recovered
Analyze Heat system Needs
Technician Manual and Directory
Produce the Steam Readings and Considerations
Consider water and Energy Readings
Consider heat system and risk details
Consider water and Energy Readings
Regulate the Energy Levels
Regulate the Condenser
Consider the safety precautions
Regulate the Fuel Levels
Regulate the Condenser
Regulate the Water Levels
Determine the steam threshold and safety levels
Consider Energy Recovered
Steam TurbineWaterFuelGeneratorHeat System GridBuilding or Facility Steam or Hot WaterCooling and HeatingElectricityBoiler
Steam Turbine
Water
Fuel
Generator
Heat System Grid
Building or Facility
Steam or Hot Water
Cooling and Heating
Electricity
Boiler