Lesson plan for reading class gread4
Research Based Interventions/Strategies
The following interventions/strategies are broken into Reading Comprehension,
Reading Fluency, Math Computation, and Math Reasoning. These are examples,
not a list of the only research based interventions. The following websites are
good resources for finding additional research based interventions.
www.interventioncentral.org,
http://ies.ed.gov/ncee/wwc/
http://www.jimwrightonline.com/php/rti/rti_wire.php
Reading Comprehension:
1. "Click or Clunk?": A Student Comprehension Self-Check: Step 1: Tell students that they will be learning ways to read more carefully. Hand out student copies of My Reading Check Sheet (see attachment at the
bottom of this page).
Review all of the reading strategies on the student handout.
Instruct students that, during any reading assignment, when they come to:
•The end of each sentence, they should ask the question, "Did I understand this sentence?" If students understand
the sentence, they say "Click!" and continue reading. If they do not understand, they say "Clunk!" and refer to the
strategy sheet My Reading Check Sheet to correct the problem.
•The end of each paragraph, they should ask the question, "What did the paragraph say?" If they do not know the
main idea(s) of the paragraph, students refer to the strategy sheet My Reading Check Sheet to correct the
problem.
•The end of each page, they should ask the question, "What do I remember?" If they do not remember sufficient
information, students refer to the strategy sheet My Reading Check Sheet to correct the problem.
Read through a sample passage with the class. At the end of each sentence, paragraph, and page, "think aloud" as
you model use of the comprehension checks. (As you read each sentence, be sure to call out "Click!" when you and
the class understand a sentence and "Clunk!" when you do not.)
Step 2: When students have learned to use the "Click or Clunk?" strategy, have them use it in independent reading
assignments.
2. Advanced Story Map: •Step 1: Introduce the concept of a Story Grammar to students and preview main elements. (Refer to the Advanced Story Map Worksheetas a guide.) Tell students that a Story Grammar can help
them to better understand a story's characters and events.
•Step 2: Set aside at least four successive instructional days to introduce the major components of the Story
Grammar: (A) Identifying important characters and their personalities and motivation, (B) Identifying main
problem and significant plot developments, (C) Noting characters' attempts to solve problems, and (D) Identifying
a narrative's overarchingtheme.
Interactive Instruction: Make the instruction of each story component highly interactive, with clear teacher
demonstration and use of examples. 'Think aloud' as you read through a story with the class to illustrate to
students how you arrive at your conclusions. Elicit student discussion about the story. As you fill out sections of the
Advanced Story Map Worksheet on the overhead, have students write responses on their own copies of the
worksheet.
•Step 3: Error Correction: When students commit errors, direct them to the appropriate section of the narrative to
reread it for the correct answer. Use guiding questions and modeling as necessary to help students to come up
with an appropriate response.
•Step 4: After students have been introduced to the key Story Grammar elements, the group is now ready to use
the Grammar to analyze a sample narrative passage. Have students read independently through a story. Pause at
pre-determined points to ask the group key questions (e.g., "Who is the main character? What is she like?"). After
discussion, encourage students to write their answers on the Advanced Story Map Worksheet while you fill out the
same worksheet as an overhead. Give specific praise to students for appropriately identifying Story Grammar
elements.
•Step 5: When students are able to use the Story Grammar independently, have them read through selected
stories and complete the Advanced Story Map Worksheet on their own. Check students' responses and conference
individually with those students requiring additional guidance and support.
3. Keywords: A Memorization Strategy: Step 1: Tell students that a good way to remember lots of facts is to use keywords. With the keyword approach, students:
•Highlight important facts or ideas in a passage
•Write a "gist" sentence that summarizes the highlighted ideas or facts
•Select a 'keyword' that will help them to recall a central idea about the article or passage.
•Create a mental picture to remember the keyword, and then
•Add details to the mental picture or create a story around the keyword to memorize additional facts or ideas.
If you have younger students (e.g., 5th grade or below), read through several sample passages with the group.
Then display a drawing or collage that represents your own representation of the passage's main ideas as mental
imagery. Using a "think-aloud" approach, explain the mental imagery of the picture and show how it encapsulates
the main facts of the original passage. Show students how they can more easily recall facts using this approach.
If you have older students (e.g., 6th grade or above), read through several sample passages with the group. Write a
description of the mental imagery that you used to memorize the keyword and related facts. Using a "think-aloud"
approach, explain the mental imagery of your keyword and related story and show how the imagery encapsulates
the main facts of the original passage. Show students how they can more easily recall facts using this approach.
Step 2: Pair students off and give them a sample passage. Assign each pair of students to:
•Identify the main idea of the passage
•Write a "gist" sentence to summarize the passage's main idea and related important facts
•Select a keyword based on the main idea
•Write out a description (or draw a picture) of the mental imagery that they will use to recall the main idea and
important facts of the passage.
Step 3: When students are able to use the keyword strategy independently, have them use the technique when
reading through expository passages. Monitor students' use of the method and their accuracy in recalling key
facts. Conference individually with those students needing additional guidance and support.
4. Reading Recovery Program
5. Compass Learning
6. Mental Imagery: Improving Text Recall: Step 1: Tell students that they can remember more of what they read by:
•making pictures in their mind of what they are reading
•carefully studying pictures or illustrations that appear in their reading or text books
Step 2: Using a "think-aloud" approach, read through a short sample narrative or expository passage. Pause at
several points to tell the class what "mental pictures" come to your mind as you read; ask students to describe
their own mental imagery as they react to the same passage. As you come across pictures or illustrations in the
passage, study them and reflect aloud on what clues they give you about the passage's meaning.
Step 3: Read aloud from additional passages. Stop at key points in the passage and call on students to relate their
mental imagery evoked by the passage or to give their interpretation of the significance of illustrations or pictures.
Step 4: When students are able to use mental imagery independently, use a prompt at the start of reading
assignments to cue them to use the strategy. You might say, for example, "Now we are going to read about what
life is like in a country village in Zimbabwe. Remember to make pictures in your head about what you are reading
and study the pictures carefully."
Reading Fluency
1. Choral Reading: Choral reading is an interpretive reading of text, often poetry or songs, by a group of voices. Students may read individual lines or stanzas alone, in pairs, or in unison. Choral reading, sometimes called
"unison reading," requires repeated readings of a particular passage and it gives practice in oral reading. It is
especially well suited to rhymes, poetry, and lyrics. As part of the activity, the teacher also reads to help set the
pace, as well as model proper pronunciation. The poems or passages can be "performed" for other students.
Ultimately, though, enjoyment and learning should come out of the process of figuring out HOW to perform the
poem rather than the performance itself.
2. Error Correction & Word Drill Techniques: Word Supply:
Before the student begins to read, tell the student, "If you come to a word that you do not know, I will help you
with it. I will tell you the correct word while you listen and point to the word in the book. After that, I want you to
repeat the word and continue reading. Try your best not to make mistakes." When the student commits a reading
error (e.g., substitution, omission, 5-second hesitation), immediately pronounce the correct word for the student,
have the student repeat the word correctly, and then direct the student to continue reading. NOTE: To avoid too
many reading interruptions, do not correct minor student errors (e.g., misreading or omitting the or a, dropping
suffixes such as -s, -ed, or -ing)
Word supply is the simplest error-correction to use, so it can be ideal for student tutors or parents to use. On the
other hand, the approach is less powerful than others described here for building student reading vocabulary
(Singh, 1990).
Sentence Repeat:
At the start of the reading session, say to the student, "If you come to a word that you do not know, I will help you
with it. I will tell you the correct word while you listen and point to the word in the book. After that, I want you to
repeat the word and then read the rest of the sentence. Than I want you to read the sentence again. Try your best
not to make mistakes."
When the student commits a reading error (e.g., substitution, omission, 5-second hesitation), immediately
pronounce the correct word for the student and have the student repeat the word correctly. Then direct the
student to reread the entire sentence in which the error occurred. The student then continues reading the
passage. (If the student repeats the original reading error when rereading the sentence, you should again
pronounce the word correctly and have the student repeat the word. Then continue on.) NOTE: To avoid too many
reading interruptions, do not correct minor student errors (e.g., misreading or omitting the or a, dropping suffixes
such as -s, -ed, or -ing) (Singh, 1990).
'Word Attack' Hierarchy:
In this approach, the instructor prompts the student to apply a hierarchy of word-attack skills whenever the
student misreads a word. The instructor gives these cues in descending order. If the student correctly identifies the
word after any cue, the instructor stops delivering cues at that point and directs the student to continue reading.
NOTE: To avoid too many reading interruptions, do not correct minor student errors (e.g., misreading or omitting
the or a, dropping suffixes such as -s, -ed, or -ing).
Here are the 'Word Attack' Hierarchy instructor cues:
•1. "Try another way." This cue is given directly after a reading error and alerts the student to the fact that she or
she has misread the word.
•2. "Finish the sentence and guess the word." The student is encouraged to make use of the sentence context to
discover the correct word pronunciation.
•3. "Break the word into parts and pronounce each one." The student is directed to sound out the segments of a
word independently.
•4. Using an index card, the tutor covers over parts of the word and each the student to sound out only the part of
the word that is visible. This approach teachers the student a method for reducing the amount of visual
information in each word.
•5. "What sound does '___' make?" As the tutor covers selected parts of the word with an index card, the student
is directed to use phonics information to sound out the word.
•6. "The word is ___." If the student cannot decode the word despite instructor support, the instructor supplies
the word. The student is directed to repeat the word and to continue reading.
(Haring, et al., 1978).
Error Word Drill:
The Error Word Drill is an effective way to build reading vocabulary. The procedure consists of 4 steps:
When the student misreads a word during a reading session, write down the error word and date in a separate
"Error Word Log".
•1. At the end of the reading session, write out all error words from the reading session onto index cards. (If the
student has misread more than 20 different words during the session, use just the first 20 words from your error-
word list. If the student has misread fewer than 20 words, consult your "Error Word Log" and select enough
additional error words from past sessions to build the review list to 20 words.)
•2. Review the index cards with the student. Whenever the student pronounces a word correctly, remove that
card from the deck and set it aside. (A word is considered correct if it is read correctly within 5 seconds. Self-
corrected words are counted as correct if they are made within the 5-second period. Words read correctly after
the 5-second period expires are counted as incorrect.)
•3. When the student misses a word, pronounce the word for the student and have the student repeat the word.
Then say, "What word?" and direct the student to repeat the word once more. Place the card with the missed
word at the bottom of the deck.
•4. Error words in deck are presented until all have been read correctly. All word cards are then gathered together,
reshuffled, and presented again to the student. The drill continues until either time runs out or the student has
progressed through the deck without an error on two consecutive cards.
3. Paired Reading:
Step 1: Sit with the student in a quiet location without too many distractions. Position the book selected for the
reading session so that both you and the student can easily follow the text.
Step 2: Say to the student, "Now we are going to read aloud together for a little while. Whenever you want to
read alone, just tap the back of my hand like this [demonstrate] and I will stop reading. If you come to a word you
don't know, I will tell you the word and begin reading with you again.".
Step 3: Begin reading aloud with the student. If the student misreads a word, point to the word and pronounce it.
Then have the student repeat the word. When the student reads the word correctly, resume reading through the
passage.
Step 4: When the child delivers the appropriate signal (a hand tap), stop reading aloud and instead follow along
silently as the student continues with oral reading. Be sure occasionally to praise the student in specific terms for
good reading (e.g., "That was a hard word. You did a nice job sounding it out!").
Step 5: If, while reading alone, the child either commits a reading error or hesitates for longer than 5 seconds,
point to the error-word and pronounce it. Then tell the student to say the word. When the student pronounces the
error-word correctly, begin reading aloud again in unison with the student.
Step 6: Continue reading aloud with the student until he or she again signals to read alone.
4. Assisted Reading Practice: •Step 1: Sit with the student in a quiet location without too many distractions. Position the book selected for the reading session so that both you and the student can easily follow the text. (Or
get two copies of the book so that you each have your own copy.)
•Step 2: Instruct the student to begin reading out loud. Encourage him or her to "do your best reading."
•Step 3: Follow along silently in the text as the student reads.
•Step 4: If the student mispronounces a word or hesitates for longer than 5 seconds, tell the student the word.
Have the student repeat the word correctly. Direct the student to continue reading aloud through the passage.
•Step 5: Occasionally, praise the student in specific terms for good reading (e.g., "You are doing a really great job
of sounding out the words that you don't know. Good work!").
5. Compass Learning
6. Reading Recovery
Math Fluency 1. Compass Learning
2. Do the Math
3. Math Computation: Promote Mastery of Math Facts Through Incremental Rehearsal: In preparation for this
intervention:
•1. The tutor first writes down on an index card in ink each math fact that a student is expected to master-but
without the answer. NOTE: Educators can use the A-Plus Math Flashcard Creator, a free on-line application, to
make and print flashcards in addition, subtraction, multiplication, and division. The web address for the flashcard
creator is: www.aplusmath.com/Flashcards/Flashcard_Creator.html
•2. The tutor reviews the collection of math-fact cards with the student. Any of the math facts that the student can
orally answer correctly within two seconds are considered to be known problems and are separated into one pile.
Math facts that the student cannot yet answer correctly within two seconds are considered 'unknown' and
collected in a second pile -- the 'unknown facts' deck.
•3. The tutor next randomly selects 9 cards from the pile of known math facts and sets this subset of cards aside as
the 'known facts' deck. The rest of the pile of cards containing known math facts is put away ('discard deck'), not to
be used further in this intervention.
During each day of the intervention:
The tutor follows an incremental-rehearsal sequence each day when working with the student:
•First, the tutor takes a single card from the 'unknown facts' deck. The tutor reads the math fact on the card aloud,
provides the answer, and prompts the student to read off and answer the same unknown problem.
•Next the tutor takes one math fact from the 'known facts' deck and pairs it with the unknown problem. When
shown the two problems in sequence, the student is asked during the presentation of each math fact to read off
the problem and answer it. The student is judged to be successful on a problem if he or she orally provides the
correct answer to that problem within 2 seconds. If the student commits an error on any card or hesitates for
longer than two seconds, the tutor reads the math fact on the card aloud, gives the answer, then prompts the
student to read off the same unknown problem and provide the answer. This review sequence continues until the
student answers all cards within two seconds without errors.
•The tutor then repeats the sequence--taking yet another problem from the 'known facts' deck to add to the
expanding collection of math facts being reviewed ('review deck'). Each time, the tutor prompts the student to
read off and answer the whole series of math facts in the review deck, beginning with the unknown fact and then
moving through the growing series of known facts that follow it.
•When the review deck has expanded to include one 'unknown' math fact followed by nine 'known' math facts (a
ratio of 90 percent 'known' material to 10 percent 'unknown' material), the last 'known' math fact that was added
to the student's review deck is discarded (put away with the 'discard deck'). The previously 'unknown' math fact
that the student has just successfully practiced in multiple trials is now treated as a 'known' math fact and is
included as the first item in the nine-card 'known facts' deck for future drills.
•The student is then presented with a new math fact to answer, taken from the 'unknown facts' deck. With each
new 'unknown' math fact, the review sequence is again repeated as described above until the 'unknown' math fact
is grouped incrementally with nine math facts from the 'known facts' deck-and on and on.
Daily review sessions are discontinued either when time runs out or when the student answers an 'unknown' math
fact incorrectly three times.
4. Math Computation: Increase Accuracy and Productivity Rates Via Self-Monitoring and
Performance Feedback: In preparation for this intervention:
•the teacher selects one or more computation problem types that the student needs to practice. Using that set of
problem types as a guide, the teacher creates a number of standardized worksheets with similar items to be used
across multiple instructional days. (A Math Worksheet Generator that will create these worksheets automatically
can be accessed at http://www.interventioncentral.org).
•The teacher prepares a progress-monitoring chart. The vertical axis of the chart extends from 0 to 100 and is
labeled 'Correct Digits' The horizontal axis of the chart is labeled 'Date'.
•The teacher creates a menu of rewards that the student can choose from on a given day if the student was able
to exceed his or her previously posted computation fluency score.
At the start of the intervention, the teacher meets with the student. The teacher shows the student a sample math
computation worksheet and answer key. The teacher tells the student that the student will have the opportunity
to complete similar math worksheets as time drills and chart the results. The student is told that he or she will win
a reward on any day when the student's number of correctly computed digits on the worksheet exceeds that of
the previous day.
During each day of the intervention:
•1. The student is given one of the math computation worksheets previously created by the teacher, along with an
answer key. The student first consults his or her progress-monitoring chart and notes the most recent charted
computation fluency score previously posted. The student is encouraged to try to exceed that score.
•2. When the intervention session starts, the student is given a pre-selected amount of time (e.g., 5 minutes) to
complete as many problems on the computation worksheet as possible. The student sets a timer for the allocated
time and works on the computation sheet until the timer rings.
•3. The student then uses the answer key to check his or her work, giving credit for each correct digit in an answer.
(A 'correct digits' is defined as a digit of the correct value that appears in the correct place-value location in an
answer. In this scoring method, students can get partial credit even if some of the digits in an answer are correct
and some are incorrect.).
•4. The student plots his or her computational fluency score on the progress-monitoring chart and writes the
current date at the bottom of the chart below the plotted data point. The student is allowed to select a choice
from the reward menu if he or she exceeds the most recent, previously posted fluency score.
5. Math Computation: Increase Accuracy By Intermixing Easy and Challenging Computation
Problems 1.The teacher first identifies one or more 'challenging' problem-types that are matched to the student's current math-computation abilities (e.g., multiplying a 2-digit number by a 2-digit number with
regrouping).
2.The teacher next identifies an 'easy' problem-type that the students can complete very quickly (e.g., adding or
subtracting two 1-digit numbers).
3.The teacher then creates a a series of student math computation worksheets with 'easy' computation problems
interspersed at a fixed rate among the 'challenging' problems. (NOTE: Instructions are included below for creating
interspersal worksheets using a free online application from www.interventioncentral.org.)
•If the student is expected to complete the worksheet independently as seat work or homework, 'challenging' and
'easy' problems should be interspersed at a 1:1 ratio (that is, every 'challenging' problem in the worksheet is
followed by an 'easy' problem).
•If the student is to have the problems read aloud and then asked to solve the problems mentally and write down
only the answer, the items should appear on the worksheet at a ratio of 3:1 (that is, every third 'challenging'
problem is followed by an 'easy' one).
Directions for On-Line Creation of Worksheets With a Mix of Easy and Challenging Computation Problems
('Interspersal Worksheets')
By following the directions below, teachers can use a free on-line Math Worksheet Generator to create
computation worksheets with easy problems interspersed among more challenging ones:
•The teacher goes to the following URL for the Math Worksheet Generator:
http://www.interventioncentral.org/tools/math-worksheet-generator
•Displayed on that Math Worksheet Generator web page is a series of math computation goals for addition,
subtraction, multiplication, and division. Teachers can select up to five different problem types to appear on a
student worksheet. Each problem type is selected by clicking on the checkbox next to it.
•The tutor then repeats the sequence--taking yet another problem from the 'known facts' deck to add to the
expanding collection of math facts being reviewed ('review deck'). Each time, the tutor prompts the student to
read off and answer the whole series of math facts in the review deck, beginning with the unknown fact and then
moving through the growing series of known facts that follow it.
•It is simple to create a worksheet with a 1:1 ratio of challenging and easy problems (that is, with an easy problem
following every challenging problem). First, the teacher clicks the checkbox next to an 'easy' problem type that the
student can compute very quickly (e.g., adding or subtracting two 1-digit numbers). Next the teacher selects a
'challenging' problem type that is instructionally appropriate for the student (e.g., multiplying a 2-digit number by
a 2-digit number with regrouping). Then the teacher clicks the 'Multiple Skill Computation Probe' button. The
computer program will then automatically create a student computation worksheet and teacher answer key with
alternating easy and challenging problems.
•It is also convenient to create a worksheet with a higher (e.g., 2:1, 3:1, or 4:1) ratio of challenging problems to
easy problems. The teacher first clicks the checkbox next to an 'easy' problem type that the student can compute
very quickly (e.g., adding or subtracting two 1-digit numbers). The teacher then selects up to four different
challenging problem types that are instructionally appropriate to the student. Depending on the number of
challenging problem types selected, when the teacher clicks the 'Multiple Skill Computation Probe' button, the
computer program will create a student computation worksheet and teacher answer key that contain 2 (or 3 or 4)
challenging problems for every easy problem.
Because the computer program generates new worksheets each time it is used, the teacher can enter the desired
settings and -in one sitting-- create and print off enough worksheets and answer keys to support a six- or eight-
week intervention.
6. Accelerated Math
Math Reasoning
1. Applied Math Problems: Using Question-Answer Relationships (QARs) to Interpret Math
Graphics: Teachers need an instructional strategy to encourage students to be more savvy interpreters of graphics in applied math problems. One idea is to have them apply a reading comprehension strategy, Question-Answer Relationships
(QARs) as a tool for analyzing math graphics. The four QAR question types (Raphael, 1982, 1986) are as follows:
•RIGHT THERE questions are fact-based and can be found in a single sentence, often accompanied by 'clue' words
that also appear in the question.
•THINK AND SEARCH questions can be answered by information in the text--but require the scanning of text and the
making of connections between disparate pieces of factual information found in different sections of the reading.
•AUTHOR AND YOU questions require that students take information or opinions that appear in the text and combine
them with the reader's own experiences or opinions to formulate an answer.
•ON MY OWN questions are based on the students' own experiences and do not require knowledge of the text to
answer.
2. Compass Learning
3. Do the Math
4. Accelerated Math