paraphrasing

This chapter included the system of the device and criteria, where it includes the block diagram and its explanations, and its main blocks that is used in this device, hardware requirements and a small brief about it and how it’s used in the device, and the flow chart of the device in its final phase with a miner explanation on it.

5.1 Overview

The implementation phases of the given device started with understanding the flow chart and block diagram that explains the flow of the device working criteria as shown before in the third chapter, then comes the software and hardware implementation phases. Software implementation includes drawing the circuit in the Proteus software and showing the expected output from the hardware circuit. Moving on to the hardware phase which will include the physical implementation of the components of the device and how they are connected.

This chapter has explained the software system of the device and its expected output, the hardware implementation of the system with its explanations, and the testing process with its result. The software implementation was done using Proteus software, and Hardware implementation included connected the components in the mentioned stages. Finally the testing was done into three stages; testing of components, testing of subsystem circuits, and testing of the device in its final stage after finishing its implementation

6.1 Overview

6.5 Summary

Chapter 6 Results And Discussions

This chapter included the result obtained from testing the device in different conditions and in many stages, and a comparison between both hardware and software implementation. Additionally, brief comparison between the experimental result from this device and the output from other previous literature device was mentioned.

54

This project has helped me to expand my knowledge about clean energy sources and how to use them since it has been an area of interest for me since high school. It also helped me to relate between this field and my specialization in telecommunications engineering.

First of all, I would like to send my thanking prayers to Allah the whole mighty, first and foremost for helping me to complete this project successfully and within the needed time and blessing my time and effort. Furthermore, I would like to express my deepest appreciation to the project supervisor MR. Athar aziz for his constant and ultimate help in support that guided me to complete the project successfully. Last but not least, special thanks to my family and friends whom I wouldn’t complete my work professionally without their endless support and prayers.