Operations Strategy (Process flow analysis)
MGMT 707 OPERATIONS MANAGEMENT
LESSON Notes for Process Flow Analysis & Service Blueprinting.
Part I Process Flow Analysis
The transformation process that defines Operations Management can be viewed a series of process flows connecting inputs to outputs. In Process Flow Analysis we will be analyzing how the product or service is made. When the sequence of steps connecting inputs to outputs is analyzed, better methods or procedures can usually be found.
We begin this process with the concept of Process Thinking. So let’s look at this idea. A process is a system. It has boundaries, inputs, outputs, suppliers and customers. A business should be viewed as an interrelated collection of parts. For a business these parts are marketing, operations, finance, accounting, engineering, human resources and information systems. None of these parts can operate independently of each other.
An idea is how to set the boundary of the Process Flow Analysis. This is always difficult but must be done. The easiest way to look at this is to determine which departments are not affected by the change. Let’s take the example of a bank. A new computer system will be installed with some new operational software. The front office operations (tellers, loan officers, and others who deal directly with the customers) are not affected. Their operating software and the computer equipment they use will not be changed. They are outside of the boundaries. However, the new software that handles the management reporting will be changed. So they are inside the boundaries. Since this is obviously an IT project, they too will be heavily involved.
So now a cross functional team should be formed consisting of those functions responsible for computer conversion. So the task is to look at the current process to determine things like throughput time, flow rate, capacity and bottlenecks.
A banking example from the Harvard Business Review titled, “How to make Reengineering Really Work”
An Italian bank operated in a very traditional manner with many bureaucratic structures and departments. The bank felt the competitive pressures from American and other European banks. So they instituted a complete review of their internal processes. The first one studied was what happened when a check was deposited by a customer into their account. The process flow required 64 activities, nine forms and 14 accounts. After producing the process flow chart, the team determined that many steps could be eliminated or combined. The new process resulted in only 25 activities, 2 forms and 2 accounts. As a result of that success, 9 other families of retail banking processes were also reviewed. As a result of all this process flow analysis the bank was able to support growth and made impressive gains in profitability...
One of the basic analysis tools is a flow processing chart like the one on the next page:
Hamburgers by some of your favorite fastfoodplaces:
A
A
Customer
orders
AssembleCook
Assemble
Assemble
Customer
orders
Cook
Customer
orders
AssembleCook
CookAssemble
Customer
orders
Standard
Or
Custom
A
A
A=raw material
inventory
W-I-P
Finished Goods Inv.
Finished
Goods Inv
W-I-P
Standard
Custom
Local
McDonald
Burger King
Wendy’s
I selected this chart because I worked in this field for years. So if you have any questions about this flow chart, just ask away. Basically it shows the departments and activities in the proper sequence for a warehouse to fill an order for delivery to a super market. A quick analysis will show you that the delays in the process total 335 minutes of the 526 minutes for an order to flow from pick ticket printing to being place in the warehouse ready for truck loading. That is over 63% of the time. How would you like your milk to sit for 110 minutes after being picked before it is ready for shipment?
The Hamburger Process:
Perhaps a good way to look at process flow analysis is to look at something you are familiar with, what happens when you order a hamburger. Flow Chart on next page.
Local; you walk into your local luncheon place and order a hamburger. The cook takes one out of the raw material inventory (freezer or frig.). Next step is the cooking process, after that comes the assembly (bun, lettuce, tomato, condiments, etc with chips) and lastly, it is served to you.
McDonald’s; McDonald’s cooks its hamburgers on grills in batches of 12. The rolls are toasted also in batches of 12. After cooking, the hamburgers are assembled to a standard format, wrapped and stored in finished goods inventory in a holding bin ready to be given to customer upon order. Fastest way around.
Burger King uses a different process. They cook their hamburgers on a conveyor system that cooks from both the top and the bottom. This takes 90 seconds from start to finish. The hamburgers are partially assembled with the buns and stored in a steam bin. This is their W-I-P (work in process) inventory. Here the W-I-P is used to replenish the burgers in finished goods inventory as needed. The top loop called Standard. The Custom loop is used for customers who “want it their own way”. By having the cooked and partially assembled hamburgers in W-I-P, Burger King can custom assemble in a much shorter time that the local luncheon place. The fixed conveyor time of 90 seconds requires that the hamburgers all be of the same thickness. So when Burger King introduced the Whopper they had to keep it the same thickness so they made it bigger.
Wendy’s adopted a more custom process. Wendy’s keeps their W-I-P on the grill in a almost cooked state. When the customer order comes in, the cook moves it to a hotter center and quickly finishes the cooking process. It moves to the assembly process and then given to the customer. Wendy’s customers perceive this assemble-to-order as higher quality then its competitors because everything is done within sight of the customer. One draw back is that since the hamburger starts in a semi-cooked state, it takes longer then Burger King’s custom assembly process.
It should be noted that all three firms are very successful because there is a very strong alignment between marketing and operations. They all recognize their strengths and focus advertising and other promotional efforts on attracting the proper market segment.
FLOW PROCESS CHART
21
Total Time52620
=19
Wait to be moved to WH.5018
Loaded on carts by route1017
Inspected416
To inspection1515 45
Meat picker fills order514
On conveyer wait for picker6013
To meat aisle3012 30
Dairy picker fills order1011
On conveyer wait for picker2510
To dairy aisle159 20
Produce picker fills order208
Picker separates by order47
Wait for order picker806
Take to start points105 30
Separated for work areas34
On distribution desk1203
To the warehouse602 90
Computer prints sheets
5
1
DescriptionTaskTime
in min.
Dist.
In ft.
21
Total Time52620
=19
Wait to be moved to WH.5018
Loaded on carts by route1017
Inspected416
To inspection1515 45
Meat picker fills order514
On conveyer wait for picker6013
To meat aisle3012 30
Dairy picker fills order1011
On conveyer wait for picker2510
To dairy aisle159 20
Produce picker fills order208
Picker separates by order47
Wait for order picker806
Take to start points105 30
Separated for work areas34
On distribution desk1203
To the warehouse602 90
Computer prints sheets
5
1
DescriptionTaskTime
in min.
Dist.
In ft.
Picking product in warehouse for shipping
operation
transport
inspection
delay
store
Part II Service Blueprinting:
Leave it to the Service industry to call it something different. Another popular name is process re-engineering, big with consulting companies and academics.
The key different is that it is a process flow chart for services that includes the customer. Remember one of the key characteristics of service is the customer as a co-producer. Just thing of ATM’s, self-serve gas, self-check out at the super market, the ever present Salad Bar.
Lynn Shostack is credited with the term, service blueprinting, by introducing two important differences from a normal flow chart. They are a) the line of visibility (what the customer can see and what the customer can’t see, the “back room”) and b) the potential fail points (where can something go wrong).
Doing the blueprinting requires 4 steps:
· Identify processes including the all important customer contacts
· Isolate fail points, normally where information is exchanged and/or an operation is performed
· Establish a time frame, calculate the time for one customer to be serviced.
· Analyze profitability of the current process and what are the costs at each fail point.
1. a. Service blueprint
Customers arrives
by car
Attendant greets
customer and
takes car
Hostess takes
name
Drink Orders
taken
Meal orders taken
Customers
receives drinks
Customers
receive soup and
salad
Table is prepared Drink orders filled
Soups and salads
prepared
Line of visibility
Customers enter
restaurant
Car is parked
Name called
Customers seated
Customers
receive meals
Waitor takes
dessert orders
Customers
recieve desserts
Bill prepared
Customer pays bill
Change given to
customer
Customer leaves
and requests car
Attendant request
information on car
Car arrives,
customers depart
Attendant retrives
car
Meals prepared
Waitor checks on
customers
Customers eat
meals
Dessert prepared
Parking Seating Meal Parking
Soups and salads
delivered
Meal delivered
Waitor takes
dessert orders
Bill given to
customer
a.The advantage of this system is a great deal of personal attenti on can be given to the customer.
The drawback is that there are many fail points in the s ystem.