analysis paper
F/QAP/021/001
Caledonian College of Engineering
|
Name of the programme |
BEng (GCU) |
|
Name of Module with Code |
Process Equipment Maintenance, MHH324722 |
|
Level/Semester & AY |
Level 4/ Semester A; AY:2018-19 |
|
Name of the Module Leader/Tutor |
Mr. Muhammad Mumtaz Mirza/ Professor Sudhir C.V., Dr Ramesh Kumar,Dr Haris Kadir, Mr Parimal Bhambari
|
|
Coursework Type |
Assignment |
|
Assessment weightage |
30% |
|
Type and date of submission |
16 Dec 2018 (online submission) |
|
Aim |
To develop knowledge and skills on process equipment maintenance techniques. |
|
Learning Outcomes |
· Appreciate maintenance objectives and evaluate various maintenance strategies for process plant application. · Critically analyze the functions of preventive maintenance and develop necessary planning and scheduling and control of preventive. · Understand the advanced concepts such as RCM and TPM techniques and advantages for a company employing them. |
Task(s)
Maintenance plays a very important role in all kind of manufacturing industries. Each maintenance has its characteristics, importance and drawbacks. Performance of a machine, depends on the type of maintenance strategies employed on it. Machines used in industries need proper maintenance because failure of machine may cause the production loss. Maintenance technique may vary from one machine to another machine because of the various conflicting factors like safety, cost, customer satisfaction etc. Factors affecting machines performance need to identify and control. Use of inappropriate maintenance plan may increase the maintenance cost. Increase in maintenance cost will increase the production cost. Selection of a maintenance approach to a particular machine or group of machines is a problem of decision making and it is always a challenging task for maintenance Manager/Engineer.
Each student will be assigned with a research paper from a reputed journal and is expected to critically evaluate while covering the following task:
a. Problems that has been addressed
b. Maintenance methodology/techniques that has been adopted
c. Critical analysis on methodology adopted
d. Implementation of statistical tools
e. Conclusion and recommendation made by the author.
Task Expected to Complete
|
Based on the assigned technical paper, prepare a brief report, outlining: |
||
|
Task No. |
Description |
Task Marks |
|
1. |
SIGNIFICANCE OF THE RESEARCH PAPER |
10 |
|
2. |
CORRELATION WITH THE MODULE |
05 |
|
3. |
METHODOLOGY,APPROACH ADOPTED (Critical evaluation, design methodology and approach adopted by the author) |
30 |
|
4. |
DATA ANALYSIS RELEVANT TO THE MODULE (Application of relevant statistical tools, other data interpretations, graphs, activity flow charts, Gantt charts etc. used) |
40 |
|
5. |
CONCLUSION , RECOMMENDATIONS & FUTURE WORK (The conclusion based on the literature review , future work identification and student recommendations) |
15 |
|
|
Total |
100 |
Note: Report must contain maximum 1000 to 1500 words.
Marking scheme
|
Component |
Description |
Weightage (%) |
|
1 |
Presentation, structure and readability |
15 % |
|
2 |
Technical content and relevance |
30 % |
|
3 |
Explanation of Maintenance Method selected |
40 % |
|
4 |
Relevant conclusion and recommendations |
15 % |
|
Total |
100% |
Instructions
1. Plagiarism is a serious offence. In case of any plagiarism detected, penalty will be imposed leading to zero mark. Policy and guidelines for dealing with plagiarism and malpractice in examination can be viewed by clicking:
http://portal.cce.edu.om/member/contentdetails.aspx?id=490
2. The course work shall be subject to plagiarism software check.
3. Course work should be submitted on time. College guidelines on late submission of coursework can be viewed by clicking: http://portal.cce.edu.om/member/contentdetails.aspx?id=565
4. Course work should be submitted with an appropriate cover page, which can be obtained from the departmental assistant at the department.
5. Name, student identification and title of the course work to be written clearly and legibly on the cover page.
6. The completed course work is to be submitted to the departmental assistant on or before the deadline and record your name, date of submission and signature in the book with the departmental assistant.
7. For online submission of course work, pdf file with appropriate cover page mentioning name of student, student number and title of the course work should be uploaded using the submission link created and made available by the module leader.
Referencing
Harvard Referencing (CCE Style) First Edition 2013 should be followed for both in-text and listing references. This downloadable document can be found in our CCE portal at: http://portal.cce.edu.om/member/contentdetails.aspx?cid=628
|
Name and Signature of Module leader
Muhammad Mumtaz Mirza ------------------------------------------------- Date: 25 June 2018 |
QEAD Rev:03 ver 01 9th July 2017 Template A 3