Statistical homework, need to use excel.
Describing Data:
Displaying and Exploring Data
Chapter 4
McGraw-Hill/Irwin
Copyright © 2012 by The McGraw-Hill Companies, Inc. All rights reserved.
*
LO1 Construct and interpret a dot plot.
LO2 Construct and describe a stem-and-leaf display.
LO3 Identify and compute measures of position.
LO4 Construct and analyze a box plot.
LO5 Compute and describe the coefficient of skewness.
LO6 Create and interpret a scatterplot.
LO7 Develop and explain a contingency table.
Learning Objectives
4-*
*
1. Dot Plot –Example
4-*
If you want to learn it, please go to http://www.youtube.com/watch?v=N7HHmTpccZI
LO1
*
2. Stem-and-Leaf
Stem-and-leaf display is a statistical technique to present a set of data. Each numerical value is divided into two parts. The leading digit(s) becomes the stem and the trailing digit the leaf. The stems are located along the vertical axis, and the leaf values are stacked against each other along the horizontal axis.
Advantage of the stem-and-leaf display over a frequency distribution - the identity of each observation is not lost.
4-*
LO2
*
3. Measures of Position
The standard deviation is the most widely used measure of dispersion.
Alternative ways of describing spread of data include determining the location of values that divide a set of observations into equal parts.
These measures include quartiles, deciles, and percentiles.
4-*
LO3 Identify and compute measures of position.
*
4. Boxplot Example
Step1: Create an appropriate scale along the horizontal axis.
Step 2: Draw a box that starts at Q1 (15 minutes) and ends at Q3 (22
minutes). Inside the box we place a vertical line to represent
the median (18 minutes).
Step 3: Extend horizontal lines from the box out to the minimum value (13
minutes) and the maximum value (30 minutes).
4-*
LO4
*
.
5. Commonly Observed Shapes
4-*
The coefficient of skewness can range from -3 up to 3.
LO5
*
.
6. Describing Relationship between Two Variables – Scatter Diagram
4-*
LO6
*
6. Contingency Tables
There are four dealerships in the Applewood Auto group. Suppose we want to compare the profit earned on each vehicle sold by the particular dealership. To put it another way, is there a relationship between the amount of profit earned and the dealership? The table below is the cross-tabulation of the raw data of the two variables.
From the contingency table, we observe the following:
- From the Total column on the right, 90 of the 180 cars sold had a profit above the median and half below. From the definition of the median this is expected.
- For the Kane dealership 25 out of the 52, or 48 percent, of the cars sold were sold for a profit more than the median.
- The percent profits above the median for the other dealerships are 50 percent for Olean, 42 percent for Sheffield, and 60 percent for Tionesta.
4-*
LO7
*
Dot Plots
A dot plot groups the data as little as possible and the identity of an individual observation is not lost.
To develop a dot plot, each observation is simply displayed as a dot along a horizontal number line indicating the possible values of the data.
If there are identical observations or the observations are too close to be shown individually, the dots are “piled” on top of each other.
4-*
LO1 Construct and interpret a dot plot.
*
Dot Plots - Examples
The Service Departments at Tionesta Ford Lincoln Mercury and Sheffield Motors, Inc., two of the four Applewood Auto Group Dealerships, were both open 24 days last month. Listed below is the number of vehicles serviced during the 24 working at the two Dealerships. Construct dot plots and report summary statistics to compare the two dealerships.
4-*
LO1
*
Dot Plot – Minitab Example
4-*
LO1
*
Stem-and-Leaf
In Chapter 2, frequency distribution was used to organize data into a meaningful form.
A major advantage to organizing the data into a frequency distribution is that we get a quick visual picture of the shape of the distribution.
There are two disadvantages, however, to organizing the data into a frequency distribution:
The exact identity of each value is lost
Difficult to tell how the values within each class are distributed.
One technique that is used to display quantitative information in a condensed form is the stem-and-leaf display.
4-*
LO2 Construct and interpret a stem and leaf plot.
*
Stem-and-leaf Plot Example
Listed in Table 4–1 is the number of 30-second radio advertising spots purchased by each of the 45 members of the Greater Buffalo Automobile Dealers Association last year.
Organize the data into a stem-and-leaf display. Around what values do the number of advertising spots tend to cluster? What is the fewest number of spots purchased by a dealer? The largest number purchased?
4-*
LO2
*
Stem-and-Leaf
Stem-and-leaf display is a statistical technique to present a set of data. Each numerical value is divided into two parts. The leading digit(s) becomes the stem and the trailing digit the leaf. The stems are located along the vertical axis, and the leaf values are stacked against each other along the horizontal axis.
Advantage of the stem-and-leaf display over a frequency distribution - the identity of each observation is not lost.
4-*
LO2
*
Stem-and-leaf Plot Example
The usual procedure is to sort the leaf values from the smallest to largest.
4-*
LO2
*
Stem-and-leaf: Another Example (Minitab)
4-*
LO2
*
Measures of Position
The standard deviation is the most widely used measure of dispersion.
Alternative ways of describing spread of data include determining the location of values that divide a set of observations into equal parts.
These measures include quartiles, deciles, and percentiles.
4-*
LO3 Identify and compute measures of position.
*
Percentile Computation
To formalize the computational procedure, let Lp refer to the location of a desired percentile. So if we wanted to find the 33rd percentile we would use L33 and if we wanted the median, the 50th percentile, then L50.
The number of observations is n, so if we want to locate the median, its position is at (n + 1)/2, or we could write this as
(n + 1)(P/100), where P is the desired percentile.
4-*
LO3
*
Percentiles - Example
Listed below are the commissions earned last month by a sample of 15 brokers at Salomon Smith Barney’s Oakland, California, office.
$2,038 $1,758 $1,721 $1,637
$2,097 $2,047 $2,205 $1,787
$2,287 $1,940 $2,311 $2,054
$2,406 $1,471 $1,460
Locate the median, the first quartile, and the third quartile for the commissions earned.
4-*
LO3
*
.
Percentiles – Example (cont.)
Step 1: Organize the data from lowest to largest value
$1,460 $1,471 $1,637 $1,721
$1,758 $1,787 $1,940 $2,038
$2,047 $2,054 $2,097 $2,205
$2,287 $2,311 $2,406
4-*
LO3
*
Percentiles – Example (cont.)
Step 2: Compute the first and third quartiles. Locate L25 and L75 using:
4-*
LO3
*
Percentiles – Example (cont.)
In the previous example the location formula yielded a whole number. What if there were 6 observations in the sample with the following ordered observations: 43, 61, 75, 91, 101, and 104 , that is n=6, and we wanted to locate the first quartile?
Locate the first value in the ordered array and then move .75 of the distance between the first and second values and report that as the first quartile. Like the median, the quartile does not need to be one of the actual values in the data set.
The 1st and 2nd values are 43 and 61. Moving 0.75 of the distance between these numbers, the 25th percentile is 56.5, obtained as 43 + 0.75*(61- 43)
4-*
LO3
*
Percentiles – Example (Minitab)
4-*
LO3
*
Box Plot
A box plot is a graphical display, based on quartiles, that helps us picture a set of data.
To construct a box plot, we need only five statistics:
the minimum value,
Q1(the first quartile),
the median,
Q3 (the third quartile), and
the maximum value.
4-*
LO4 Construct and analyze a box plot.
*
Boxplot - Example
Alexander’s Pizza offers free delivery of its pizza within 15 miles. Alex, the owner, wants some information on the time it takes for delivery. How long does a typical delivery take? Within what range of times will most deliveries be completed? For a sample of 20 deliveries, he determined the following information:
Minimum value = 13 minutes
Q1 = 15 minutes
Median = 18 minutes
Q3 = 22 minutes
Maximum value = 30 minutes
Develop a box plot for the delivery times. What conclusions can you make about the delivery times?
4-*
LO4
*
Boxplot Example
Step1: Create an appropriate scale along the horizontal axis.
Step 2: Draw a box that starts at Q1 (15 minutes) and ends at Q3 (22
minutes). Inside the box we place a vertical line to represent
the median (18 minutes).
Step 3: Extend horizontal lines from the box out to the minimum value (13
minutes) and the maximum value (30 minutes).
4-*
LO4
*
.
Boxplot – Using Minitab
Refer to the Applewood Auto Group data. Develop a box plot for the variable age of the buyer. What can we conclude about the distribution of the age of the buyer?
The MINITAB statistical software system was used to develop the following chart and summary statistics. What can we conclude about the distribution of the age of the buyers?
The median age of purchaser
was 46 yrs.
25 percent were more than
52.75 years of age
50 percent of the purchasers
were between the ages of 40
and 52.75 years
The distribution of age is
symmetric
4-*
LO4
*
Referring back to the Applewood Auto Group data, we use Minitab to generate a box plot on the variable age of the buyers. What can we conclude about the distribution of the variable age of the buyer?
The box plot tells us that the median age of the purchasers was 46 years. About 25% were older than 52.75 years of age, about half of them were between the ages of 40 and 52.75 years of age. The distribution of age is symmetric.
Skewness
In Chapter 3, measures of central location (the mean, median, and mode) for a set of observations and measures of data dispersion (e.g. range and the standard deviation) were introduced
Another characteristic of a set of data is the shape.
There are four shapes commonly observed:
symmetric,
positively skewed,
negatively skewed,
bimodal.
4-*
LO5 Compute and understand the coefficient of skewness.
*
Skewness - Formulas for Computing
The coefficient of skewness can range from -3 up to 3.
A value near -3, indicates considerable negative skewness.
A value such as 1.63 indicates moderate positive skewness.
A value of 0, which will occur when the mean and median are equal, indicates the distribution is symmetrical and that there is no skewness present.
4-*
LO5
*
Commonly Observed Shapes
4-*
LO5
*
.
Skewness – An Example
Following are the earnings per share for a sample of 15 software companies for the year 2010. The earnings per share are arranged from smallest to largest.
Compute the mean, median, and standard deviation. Find the coefficient of skewness using Pearson’s estimate.
What is your conclusion regarding the shape of the distribution?
4-*
LO5
*
.
Skewness – An Example Using Pearson’s Coefficient
4-*
LO5
*
Skewness – A Minitab Example
4-*
LO5
*
Describing Relationship between Two Variables
When we study the relationship between two variables we refer to the data as bivariate.
One graphical technique we use to show the relationship between variables is called a scatter diagram.
To draw a scatter diagram we need two variables. We scale one variable along the horizontal axis (X-axis) of a graph and the other variable along the vertical axis (Y-axis).
4-*
LO6 Create and interpret a scatterplot.
*
Describing Relationship between Two Variables – Scatter Diagram Examples
4-*
LO6
*
Describing Relationship between Two Variables – Scatter Diagram Excel Example
In the Introduction to Chapter 2 we presented data from the Applewood Auto Group. We gathered information concerning several variables, including the profit earned from the sale of 180 vehicles sold last month. In addition to the amount of profit on each sale, one of the other variables is the age of the purchaser.
Is there a relationship between the profit earned on a vehicle sale and the age of the purchaser?
Would it be reasonable to conclude that the more expensive vehicles are purchased by older Buyers?
4-*
LO6
*
Describing Relationship between Two Variables – Scatter Diagram Excel Example
4-*
LO6
*
Contingency Tables
A scatter diagram requires that both of the variables be at least interval scale.
What if we wish to study the relationship between two variables when one or both are nominal or ordinal scale? In this case we tally the results in a contingency table.
4-*
LO7 Develop and explain a contingency table.
*
Contingency Tables
A contingency table is a cross-tabulation that simultaneously summarizes two variables of interest.
Examples:
Students at a university are classified by gender and class rank.
A product is classified as acceptable or unacceptable and by the shift (day, afternoon, or night) on which it is manufactured.
A voter in a school bond referendum is classified as to party affiliation (Democrat, Republican, other) and the number of children that voter has attending school in the district (0, 1, 2, etc.).
4-*
LO7
*
Contingency Tables – An Example
There are four dealerships in the Applewood Auto group. Suppose we want to compare the profit earned on each vehicle sold by the particular dealership. To put it another way, is there a relationship between the amount of profit earned and the dealership? The table below is the cross-tabulation of the raw data of the two variables.
From the contingency table, we observe the following:
- From the Total column on the right, 90 of the 180 cars sold had a profit above the median and half below. From the definition of the median this is expected.
- For the Kane dealership 25 out of the 52, or 48 percent, of the cars sold were sold for a profit more than the median.
- The percent profits above the median for the other dealerships are 50 percent for Olean, 42 percent for Sheffield, and 60 percent for Tionesta.
4-*
LO7
*
205
,
2
$
721
,
1
$
12
100
75
)
1
15
(
4
100
25
)
1
15
(
75
25
75
25
=
=
=
+
=
=
+
=
L
L
L
L
ly
respective
positions,
12th
and
4th
the
at
located
are
quartiles
third
and
first
the
Therefore,
75
.
1
100
25
)
1
6
(
25
=
+
=
L
(
)
017
1
22
5
18
3
95
4
3
3
22
5
1
15
95
4
40
16
95
4
09
0
1
95
4
15
26
74
2
2
2
.
.
$
)
.
$
.
($
)
(
Skewness
the
Compute
:
4
Step
3.18
is
largest
to
smallest
from
arranged
data,
of
set
the
in
value
middle
The
Median
the
Find
:
3
Step
.
$
)
)
.
$
.
($
...
)
.
$
.
($
Deviation
Standard
the
Compute
:
2
Step
.
$
.
$
Mean
the
Compute
:
1
Step
=
-
=
-
=
=
-
-
+
+
-
=
-
-
S
=
=
=
=
å
s
Median
X
sk
n
X
X
s
n
X
X